[Work in progess] Burnins Avalon Chip to mining board service

[itod]

Fantastic result burnin, congratulations! I guess this journey is nearly over for you now. I imagine it's going to be a pretty great feeling to see the first few hundred boards coming off the production line .

I bet it will be thousands of boards, or more probably tens of thousands.

Congrats, Burnin!

[1715127037]

1715127037

[1715127037]

1715127037

[1715127037]

1715127037

[1715127037]

1715127037

[badalien]

Great Job burnin, you are an Galactic Guy for all of us. Now we are waiting to make the order on your webside.

[nemercry]

Good work Sir.
We all do appreciate what youre doing.

[Tornate]

Burnin, will you pull your board schemes to GitHub for public?

[Foofighter]

This is an open-source project, the sources will be released when the product ships.

took this from OP post

[baloo_kiev]

Burnin, do all the board's chips share the same 32-bit nonce range? How often can work be restarted?

[SebastianJu]

Burnin, just a question on ordering.

for example: if the chips-order Batch1-5 from sebastianju arrive at the same time... do you work down first batch1, then batch2, ... or do you work down on order date on your page?

Burnin told me via pm that he will do it in priority payment for assembly and second priority the chips he has in hands. A early payment without chips in his hands cant be fulfilled first.

@burnin... regaring the temperature... 320Mhz at 50°C... is it with heatsink? Sounds like the clock could take some more until the temperature comes into high temps.

[ewibit]

Burnin told me via pm that he will do it in priority payment for assembly and second priority the chips he has in hands. A early payment without chips in his hands cant be fulfilled first.

payment for assembly only in
BTC
or
USD
or
€
or all of them?

[SebastianJu]

Burnin told me via pm that he will do it in priority payment for assembly and second priority the chips he has in hands. A early payment without chips in his hands cant be fulfilled first.

payment for assembly only in
BTC
or
USD
or
€
or all of them?

I believe i have read in this thread that he wanted to accept € and BTC. But to be sure it would be better to ask him. Or wait for the shop's opening.

[RoadStress]

However - as my opinion whether you are recommended to buy or not buy - I don't know your regulations there and suppose they're quite strict, like FCC stuff and EMC tests. Until for example proper measurements of equipment are done - it may be risky to install many of these near yourself due to electromagnetic emission and noise. So either properly designer board and/or filters and/or shielding is required. I hope that this would be clarified soon. This is also true for homebrew devices that you make and don't care about switching noise such devices produce (like I saw in some DIY stuff where powering of such high-power chips are done in absolutely insane ways, or like problems with other asic vendors, you know them by the way likely, where their shipments were banned by customs due to these violations).

Anyway, as far as I know Dave has as well options to install miners in his location - this would be likely safe in any way, and maybe if you install these - before proper measurements done (i.e. in special laboratory with antennas where typically EMC measurements are done) - this maybe risky to install at home,  or at least close to you - so don't sit near miner 24x7 and don't put those close to you.

You should care about that and do not put your health into unnecessary risk. However I suppose Dave will do his best to solve these issues and make device fully compliant for safe usage. However that still won't mean that such equipment can be installed in bulk at home, and should be spreaded in space for maintaining safely low electromagnetic noise. Likely also undervolted boards is nice choice for safety, but all of that should be measured, and likely will be measured, the only delay could be there (and it is basically your choice) that such measurements could take additional time and can't be done before August timeframe. This depends.

@burnin i wasn't aware of this issue and now i would like more information from you. Are your boards safe to install at home? Since you are operating as a company registered in Germany i think this shouldn't be a problem, but it's always best to be extra sure when it comes to this stuff.

[JHenderson]

Thought FCC guidelines were to resolve interference issue with other electronic components not mitigate against potential heath risks. FCC and FDA are different 

[lenny_]

Burnin, do all the board's chips share the same 32-bit nonce range? How often can work be restarted?

This is very important question. We would like to have restart support so p2pool will be working on it.

[burnin]

Burnin, do all the board's chips share the same 32-bit nonce range? How often can work be restarted?

Every chain of chips works on a single 32bit range.
Work can be aborted at any time.

Thought FCC guidelines were to resolve interference issue with other electronic components not mitigate against potential heath risks. FCC and FDA are different  

Contrary to all my competitors I do take EMC seriously and designed these boards to be compliant. (which did increase price)
Emission testing is scheduled for next week, but the Lab hasn't yet confirmed my appointment.
The boards will be tested against EN55022.

[RoadStress]

Contrary to all my competitors I do take EMC seriously and designed these boards to be compliant. (which did increase price)
Emission testing is scheduled for next week, but the Lab hasn't yet confirmed my appointment.
The boards will be tested against EN55022.

Thank you very much. I am a happy customer!

[eraziel]

It is very refreshing and at the same time frustrating that an open project has been carried out with more professionalism than several big money projects.
I have to say I get inspired with each photo and comment about the product and dev process in this thread and I hope the community wakes up and stops feeding the undeserving morons that some of the other suppliers are.

The BitburnerXX and the execution of the whole project is truly a breath of fresh air.

[g83]

+100000000

[iikun]

with so many pitfalls & even legitimate companies failing in the BTC world, I'm extremely happy to have chosen to back Burnin. great stuff Burnin!

[2weiX]

FICK JA

[HeRetiK]

FICK JA

Fick ja indeed my friend, fick ja indeed...

[culexevilman]

FICK JA

Fick ja indeed my friend, fick ja indeed...

yeah BFL def sucking Burnin's balls.