[Work in progess] Burnins Avalon Chip to mining board service

[Tamerz]

Finally got my Bitburner XX. Just one, as as toy. The remainder of the order I had cancelled.

But it seems it is not recognized on the USB bus on Windows7:

running the command line:

"C:\Program Files\cgminer-3.6.3-windows\cgminer.exe" -o stratum.mining.eligius.st:3334  -u 1E1igiusfEjs1pCaGjEERExE9gYcrFwow7 -p password --avalon-options 115200:2:10:d:350 --bitburner-voltage 1270 --avalon-temp 60 --debug -nogpu

gives this output:

[2013-10-18 18:52:53] CL Platform 0 vendor: Intel(R) Corporation

 [2013-10-18 18:52:53] CL Platform 0 name: Intel(R) OpenCL
 [2013-10-18 18:52:53] CL Platform 0 version: OpenCL 1.1
 [2013-10-18 18:52:53] Platform 0 devices: 1
 [2013-10-18 18:52:53]  0       Intel(R) HD Graphics 4000
 [2013-10-18 18:52:53] Unable to load ati adl library
 [2013-10-18 18:52:53] 1 GPU devices max detected
 [2013-10-18 18:52:53] USB all: found 6 devices - listing known devices
.USB dev 0: Bus 1 Device 2 ID: 0403:6001
  ** dev 0: Failed to open, err -12
 [2013-10-18 18:52:53] 1 known USB devices

So what is missing?
Already flashed the latest firmware from burnin's page, to be sure. Also tried different USB slots, but no success.

Did you already use Zadig to switch the device to use the WinUSB driver like the cgminer README says?

http://ck.kolivas.org/apps/cgminer/zadig/

[1714947227]

1714947227

[1714947227]

1714947227

[1714947227]

1714947227

[Sophokles]

Did you already use Zadig to switch the device to use the WinUSB driver like the cgminer README says?

http://ck.kolivas.org/apps/cgminer/zadig/

Ok, now it worked. Tried the Zadig yesterday night. But no avail - didn't figure out that you would have to check 'list all devices' before the BitBurner can be chosen. Thanks!

[dani]

Update: I just got tracking numbers for my zefir order.

[culexevilman]

Update: I just got tracking numbers for my zefir order.

whats your order number?

[dani]

Update: I just got tracking numbers for my zefir order.

whats your order number?

#36x

[vanycon]

Update: I just got tracking numbers for my zefir order.

got my #79x (sebastian) number also

[pazor]

no trackingnumber
no miner

zefir order 6xx

[Roy Badami]

Code:

Avalon: Fan1: 0/m, Fan2: 0/m, Fan3: 0/m  Temp1: 55C, Temp2: 55C, Temp3: 55C, TempMAX: 59C

What's the option in cgminer to see detailed stats like that?

roy

[baloo_kiev]

Code:

Avalon: Fan1: 0/m, Fan2: 0/m, Fan3: 0/m  Temp1: 55C, Temp2: 55C, Temp3: 55C, TempMAX: 59C

What's the option in cgminer to see detailed stats like that?

roy

In the window, I press D for display options, and then V for verbose output (and then Enter to return to the main screen).

[Schrankwand]

Update: I just got tracking numbers for my zefir order.

got my #79x (sebastian) number also

So, 79x gets done, 6xx doesnt.


Awesome...?

[bitteeinbitcoin]

Update: I just got tracking numbers for my zefir order.

whats your order number?

#36x

Wow, my order number is 37x with chips from Zefir, received no tracking number also. And i idiot paid for EXPRESS shipping. Very nice.

[fasmax]

No tracking yet for (zefir chips) order 5xx.

[dani]

Update: I just got tracking numbers for my zefir order.

whats your order number?

#36x

Wow, my order number is 37x with chips from Zefir, received no tracking number also. And i idiot paid for EXPRESS shipping. Very nice.

I feel for you :/
I paid for express as well, but it's delivered with UPS.. no earlier than monday, even though the package arrived tonight at a centre 10km away. Damn.

[madxista]

No tracking yet for (zefir chips) order 5xx.

I also didn't get tracking number for order #46X and my chips are from Zefirs batch 3. :/

[Pontius]

Got my Biturners XX on Friday noon (with chips from SebstianJu's batch) and played around with the settings since then.
Running them now stable at 372 MHz (7.69 GHash/s per unit) with less than 0.05% HW errors. Great piece of work, burnin!

[SebastianJu]

Got my Biturners XX on Friday noon (with chips from SebstianJu's batch) and played around with the settings since then.
Running them now stable at 372 MHz (7.69 GHash/s per unit) with less than 0.05% HW errors. Great piece of work, burnin!

Why not at 450MHz? With voltage 1334mV and target temp of 30°C its possible...

[madmax_ger]

Got my Biturners XX on Friday noon (with chips from SebstianJu's batch) and played around with the settings since then.
Running them now stable at 372 MHz (7.69 GHash/s per unit) with less than 0.05% HW errors. Great piece of work, burnin!

Why not at 450MHz? With voltage 1334mV and target temp of 30°C its possible...

for me it isn't. i tried with above params and d=28.44, cgminer won't start up anymore.
I see, I probably have to update my cgminer.

[Pontius]

Got my Biturners XX on Friday noon (with chips from SebstianJu's batch) and played around with the settings since then.
Running them now stable at 372 MHz (7.69 GHash/s per unit) with less than 0.05% HW errors. Great piece of work, burnin!

Why not at 450MHz? With voltage 1334mV and target temp of 30°C its possible...

Pretty simple - I didn't read the specs close enough, so my power supply is not suited for anything > 65 Watts per XX. 

[madmax_ger]

Any chance anyone happens to know a part number for that fuse?

1206SFH100F/24-2
That was one thing that always bugged me about bkkcoin's design: NO FUSE.

Does anyone have an idea where to get this part from in germany asap?

the closest matching part I found was a 1206SFH100F/24, without -2

[burnin]

Any chance anyone happens to know a part number for that fuse?

1206SFH100F/24-2
That was one thing that always bugged me about bkkcoin's design: NO FUSE.

Does anyone have an idea where to get this part from in germany asap?

the closest matching part I found was a 1206SFH100F/24, without -2

That's the one, any 1206 10 Amp fuse will do.