Fourth alt coin thread last three got oversized.

[Akarabzie]

you guys use what for Zcash ? Nicehash ?

I'm just using Claymore miner directly to Nanopool, then wallet. Selling 50% every 3-4 days when I see highs.

[philipma1957]

he is also pushing the psu pretty hard.  those evga  will lose some efficiency at 950 watts

I have a lot of 3 card rigs  and a 750 watt evga  which is 750/3 = 250

he is 1000/6 = 166.67   has to have less overhead which could be hard on setup.

but  his eth/dcr dual is nice.

if he were to run 5 cards on the rig  vs six I thinks his watts to hash would improve for both coins

[zer0k]

on my six gpu 1070 rig i found that i can dual mine eth and dcr at 980 or so watt while zec muning at 2500 has uses 950

dual mining is 170 eth and 3500 dcri , which is more profitable than zec

this is with core +122 mem +500 and power lim 70

From your figures it seems your ZEC efficiency is only 2.6 Sol/W (2500/950) which is a bit low unless you are going all out for performance
With some fine tuning and lowering your power targets you should be able to get to 3+ Sol/W

[HerbPean]

simpleMiningOs Stupid question ... 1 account/email can mining only one coin with all the rigs ?

yes

but

new version has grouping feature that will cease the need to have multiple emails to mine different algos

Thanks !!

[VoskCoin]

If you were going to build a gpu rig literally tomorrow. . What would you guys be ordering and why? Budget is 3k

[citronick]

If you were going to build a gpu rig literally tomorrow. . What would you guys be ordering and why? Budget is 3k

a nice ZEC rig with a 4 x 1080ti comes to mind.

[Truthchanter]

If you were going to build a gpu rig literally tomorrow. . What would you guys be ordering and why? Budget is 3k

Maybe a 6x470 4gb rig. would be about 2k budget tops or probably closer to 1.5k if you get good deals/rebates/used parts

[philipma1957]

If you were going to build a gpu rig literally tomorrow. . What would you guys be ordering and why? Budget is 3k

a nice ZEC rig with a 4 x 1080ti comes to mind.

the best price I got was 669 - 8% for a 1080ti  that was 615 usd  with 6 months to pay it 0 payments 0 fees.

If I could get that deal  for four cards and the mobo+ parts I would jump on it.

I would most likely have the rig earn full ROI before the 6 months came up.

[flminer]

Looking to pick up another card. debating between a 1070 8gb or rx480 8gb. What hash rate are you guys getting from a 1070 8gb?

[philipma1957]

Looking to pick up another card. debating between a 1070 8gb or rx480 8gb. What hash rate are you guys getting from a 1070 8gb?

I do zec or skein

zec I get 420-440h for  around 140 watts whole machine at the wall

[JaredKaragen]

Phil;

Last night I just changed from ccminer 1.7 to the alexis78 version: Click here

Skein hashrate on one 1070 went from ~410Mh to 521Mh.... that's a HUGE jump.

If you can't build it yourself, you can get the nemosminer link from this site, and when you go to download it from mega, just download the ccmineralexis78.exe file by itself;  I didn't find any bugs or anything in it, and many on this site use it already.   The link above is for the source to compile in windows yourself;  there aren't any pre compiled ones available yet that I know of (on github).  THE MEGA LINK

[philipma1957]

Phil;

Last night I just changed from ccminer 1.7 to the alexis78 version: Click here

Skein hashrate on one 1070 went from ~410Mh to 521Mh.... that's a HUGE jump.

If you can't build it yourself, you can get the nemosminer link from this site, and when you go to download it from mega, just download the ccmineralexis78.exe file by itself;  I didn't find any bugs or anything in it, and many on this site use it already.   The link above is for the source to compile in windows yourself;  there aren't any pre compiled ones available yet that I know of (on github).  THE MEGA LINK

So I went and put it on a zip

and it  is not working.  I will play with it later on.

I will busy with a lot of real world stuff this weekend

[flminer]

Looking to pick up another card. debating between a 1070 8gb or rx480 8gb. What hash rate are you guys getting from a 1070 8gb?

I do zec or skein

zec I get 420-440h for  around 140 watts whole machine at the wall

Appreciate it! Looks like the 1070 wins.

[JaredKaragen]

So I went and put it on a zip

and it  is not working.  I will play with it later on.

I will busy with a lot of real world stuff this weekend

I thought the original version of that reply was lacking... lol

I didn't find a precompiled version on github, so I just took the one from the nemosminer package myself...  Ill probably compile once I get my laptop running again (another SSD failed, and this time an Apacer.  I was surprised)

All I did was replace my executable and everything else stayed the same as far as config and all worked flawlessly to upgrade the miner app...  I think I am running default intensity presently, so if you have issues try to remove the -i  intensity flag and setting;  might clear it up.

[philipma1957]

So I went and put it on a zip

and it  is not working.  I will play with it later on.

I will busy with a lot of real world stuff this weekend

I thought the original version of that reply was lacking... lol

I didn't find a precompiled version on github, so I just took the one from the nemosminer package myself...  Ill probably compile once I get my laptop running again (another SSD failed, and this time an Apacer.  I was surprised)

All I did was replace my executable and everything else stayed the same as far as config and all worked flawlessly to upgrade the miner app...  I think I am running default intensity presently, so if you have issues try to remove the -i  intensity flag and setting;  might clear it up.

For now I moved two 3 card nvidia 1080 ti's off skein and back to zec.

Just a little busy for next few days to push this build correctly.

[zer0k]

So I went and put it on a zip

and it  is not working.  I will play with it later on.

I will busy with a lot of real world stuff this weekend

I thought the original version of that reply was lacking... lol

I didn't find a precompiled version on github, so I just took the one from the nemosminer package myself...  Ill probably compile once I get my laptop running again (another SSD failed, and this time an Apacer.  I was surprised)

All I did was replace my executable and everything else stayed the same as far as config and all worked flawlessly to upgrade the miner app...  I think I am running default intensity presently, so if you have issues try to remove the -i  intensity flag and setting;  might clear it up.

Hi Jared...any chance you can share your command line for running ccminerAlexis78.exe for skein on zpool?

I just have a really basic command running right now and I'm wondering if I can improve things

Code:

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTCADDRESS -p c=BTC 

I have a 1060 running @ 61% power target doing ~340MH/s and then a couple of 1080ti's @ 60% power target doing ~1442MH/s.
Not pushing them at all as they are in mid tower cases and it's hot here

[ps_jb]

the best price I got was 669 - 8% for a 1080ti  that was 615 usd  with 6 months to pay it 0 payments 0 fees.

Phil I wrote you and somebody else that you can get 15% discount easily on purse.io paying in BTC.

I've purchased some stuff from there

[philipma1957]

the best price I got was 669 - 8% for a 1080ti  that was 615 usd  with 6 months to pay it 0 payments 0 fees.

Phil I wrote you and somebody else that you can get 15% discount easily on purse.io paying in BTC.

I've purchased some stuff from there

How do they handle the sales tax?

Amazon  charges me 7%.

so 700 dropped by 15% =  595 but add the 7% sales tax it is  back to 636.65.

This is the reason I don't use purse as the sales tax hurts.  Maybe I am wrong and they won't charge that sales tx.

[JaredKaragen]

Hi Jared...any chance you can share your command line for running ccminerAlexis78.exe for skein on zpool?

Code:

ccminerAlexis78.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p c=BTC,skein,stats

I dont change any card settings, I run them stock settings from the factory;  on machines that have cards close together, Ill manually ramp the fan curves up a little.... that's it.

Default intensity on this build is higher than the old builds, which is proper.  if it doesn't run well;  back it off and try again.  I think default is 26 right now in that build.

[philipma1957]

Hi Jared...any chance you can share your command line for running ccminerAlexis78.exe for skein on zpool?

Code:

ccminerAlexis78.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p c=BTC,skein,stats

I dont change any card settings, I run them stock settings from the factory;  on machines that have cards close together, Ill manually ramp the fan curves up a little.... that's it.

Default intensity on this build is higher than the old builds, which is proper.  if it doesn't run well;  back it off and try again.  I think default is 26 right now in that build.

Thanks I see my error in my bat.

I did not write ccminerAlexis78.exe.

I will test it later.