Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3

[mdude77]

Server grade power supplies can handle the 100% load.

ATX power supplies can't.

That is probably valid.  Regardless, these PSUs in particular sound like jet engines at 100% load.  (That may be okay for some situations.)

M

[lentyna]

Server grade power supplies can handle the 100% load.

ATX power supplies can't.

That is probably valid.  Regardless, these PSUs in particular sound like jet engines at 100% load.  (That may be okay for some situations.)

M

I never tried APW3++ at 100% but when I tried at 80% the sound already was like jet engine, I imagine when it's at 100%

[HagssFIN]

He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.

[lentyna]

He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.

Got it. I meant D3 itself.

[madmartyk]

He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.

I have a couple HP 2450W power supplies now.  If you get them near max they whine!!  Using them to power 2 L3+'s and they aren't bad.

[COINKING84]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

[Flickspeed]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

[MinerSRQ]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

I'm guessing you're questioning the temps?   The Temp (PCB) averages 64 and the Temp(Chip) about 83.   Since I'm new, I'm just assuming that's an OK range?   

Elapsed   MH/S(RT)   MH/S(avg)   FoundBlocks   LocalWork   Utility   WU   BestShare
8h39m47s 18,810.0 19,332.69 0 182,389 5.45 273.67 57303

Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1 60 537 6291.87 0 65 83 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
2 60 537 6301.11 0 63 81 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3 60 537 6217.02 5 64 84 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo

Speed (r/min)   3,750   3,780

[MinerSRQ]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

Well, yes, happy to have received it - of course, it would have been nice to get it months ago when I ordered it.    And, $5/day profit at the current price...  but did you foresee BTC cresting over 7k as it has?   Seems like you dislike  Dash (or D3?) why are you hanging around this thread?

[davemanet]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

how did you lower fan speed?

[MinerSRQ]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

how did you lower fan speed?

In the "Miner General Configuration"  (http://172.20.1.34/cgi-bin/minerConfiguration.cgi)
I set the "Customize the fan speed percentage" to 50

I've done this on all my S7s and it makes them very reasonable (sound wise).

[mohima1230]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

how did you lower fan speed?

D3 miner will stop running when the Temp(PCB) exceeds to 85°C, there will be an error message “Fatal Error: Temperature is too high!” shown in the bottom of kernel log page.

[MinerSRQ]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

is 50 percent safe?

how did you lower fan speed?

Temp(PCB) heat more then 85 will turn off the miner

I'm glad to know there's a safety switch (so to speak) - so my PCB Temps of 64 should be just fine.  ?

[COINKING84]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol

[MinerSRQ]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol

It's been 24 hours for me too!  What pool are you using?

[TGM_Miner]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol

Can you elaborate, at least ballpark?  Still waiting on my three D3s coming in the end of November batch and curious about the real-world profitability.

[lentyna]

Which pool do you recommend?  It's so odd that some calculators show -$10/month for me, and some show $150/profit month. 

I still use granatgas-pool and it was good to me, my 2nd choice is nicehash

Thank you I have joined your pool .  Can you tell me what command you enter into D3?  I'm a little confused.  I put below but I don't know if it's optimal.

-o stratum+tcp://stratum-us.granatgas-pool.info:1111#xnsub -u <WALLET_BTC_ADDRESS> -p c=BTC


URL: stratum+tcp://stratum-us.granatgas-pool.info:1111
WORKER: WALLET_ADDRESS
PASSWORD: c=DASH,d=16

[sovacar]

I just received my first D3 - I was shocked to see 20GHz average!     AND very happily surprised to see that I had the option to control the fan speed!   (50% works perfectly and is much less noisy than the auto-tune S9!)

Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions.  (i.e., pool questions / firmware / etc.)

Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!

only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol

Can you elaborate, at least ballpark?  Still waiting on my three D3s coming in the end of November batch and curious about the real-world profitability.

I earns around 6-7 $/day per machine before electricity

[davemanet]

Which pool do you recommend?  It's so odd that some calculators show -$10/month for me, and some show $150/profit month. 

I still use granatgas-pool and it was good to me, my 2nd choice is nicehash

Thank you I have joined your pool .  Can you tell me what command you enter into D3?  I'm a little confused.  I put below but I don't know if it's optimal.

-o stratum+tcp://stratum-us.granatgas-pool.info:1111#xnsub -u <WALLET_BTC_ADDRESS> -p c=BTC


URL: stratum+tcp://stratum-us.granatgas-pool.info:1111
WORKER: WALLET_ADDRESS
PASSWORD: c=DASH,d=16

Thank you!  I'm getting about $6.50/day it appears.

[DANTER]

Batch 21st-30th - on the way...