[ANN]INNOVA - We strive for innovation and adoption! | Hybrid Tribus coin

[GhostMinerBox]

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

[armspec]

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

[GhostMinerBox]

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

Are you running it on a single wallet or dual wallet setup?

[armspec]

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

Are you running it on a single wallet or dual wallet setup?

I have a single wallet setup.. I have another wallet on my pc, but its not setup with the mn wallet on my vps    (sorry my newbie status is not letting me post very quickly)

[GhostMinerBox]

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

[armspec]

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

shit... ok...doing this now

[Nicolas9]

60% Masternode are up and running well now, look like people getting to know how to config the sentinel shits properly.
I did have my Masternode back online using guide from GhostMinerBox, I highly recommend everyone to look at it instead of guide on website.

[GhostMinerBox]

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

shit... ok...doing this now

While you're at it, you may as well move your wallet.dat from VPS to your local PC and setup two-wallet setup which is what is recommended. Anyhow - good luck. I am out for today.

[armspec]

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

shit... ok...doing this now

While you're at it, you may as well move your wallet.dat from VPS to your local PC and setup two-wallet setup which is what is recommended. Anyhow - good luck. I am out for today.

Thanks again man, appreciate all the help

[Mercedes]

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

shit... ok...doing this now

While you're at it, you may as well move your wallet.dat from VPS to your local PC and setup two-wallet setup which is what is recommended. Anyhow - good luck. I am out for today.

Thanks again man, appreciate all the help

the  guide is very helpfull for me ,i want to invest some masternode recently ,thanks very much .

[Asianism]

The qt wallet is using 1.5GB ram on my VPS ? Is it normal ?

[tohong]

Instructions are delicated, thank for your recommendation.

60% Masternode are up and running well now, look like people getting to know how to config the sentinel shits properly.
I did have my Masternode back online using guide from GhostMinerBox, I highly recommend everyone to look at it instead of guide on website.

[Asianism]

Instructions are delicated, thank for your recommendation.

60% Masternode are up and running well now, look like people getting to know how to config the sentinel shits properly.
I did have my Masternode back online using guide from GhostMinerBox, I highly recommend everyone to look at it instead of guide on website.

Just so I thought I is normal, my nodes are showing watchdog expired after 24hr, hmmm

[Aleksiusha]

still no news from cryptopia? i dont get it, is it so hard to sync wallet? they earning alot money on us, casual users and cant even do their job proporly. and now when there is no nova exchange its basically main exchanger for "shitcoin" or new coins.

if you want to buy innovo now, you should use coinsmarkets.com  i never had problems with it.

[lombo66]

Sentinel runs but:

Why sentinel shows "can not connect to desired....." ?

Whats the problem i dont find out?

[lemonyak]

there is a big problem in the middle and 2 days could not be corrected. Will the problem come true, or is innova over? You do not make a statement and you call the guard your wallet. my wallet was stuck in WATCHDOG_EXPIRED moddunda and i sent innova coinler Cryptopia seems gone but did not go. We expect a smooth explanation and we want to fix the problem as soon as possible.

[Aleksiusha]

Sentinel runs but:

Why sentinel shows "can not connect to desired....." ?

Whats the problem i dont find out?

you should recheck all again, i did as  GhostMinerBox  wrote and everything  enabled. and sentinel working all green there. just doble check

[Aleksiusha]

there is a big problem in the middle and 2 days could not be corrected. Will the problem come true, or is innova over? You do not make a statement and you call the guard your wallet. my wallet was stuck in WATCHDOG_EXPIRED moddunda and i sent innova coinler Cryptopia seems gone but did not go. We expect a smooth explanation and we want to fix the problem as soon as possible.

its not only innova problem . desire and vivo had same issue and still do.  just use GhostMinerBox  guide and you should be fine. and cryptopia just lazy they just need to resync wallet. but they only want our money

[Akuaja]

Hi I just want to share what happened with my windows masternode, everything is depend on how you install your masternodes at the first places, i have tried to do @GhostMinerBox step several time, but not work  (Status New_STart-Required). And then I start reinstall again my masternode following the Innova guide ( since I previously install following vivo guide), and then follow exactly every step @GhostMinerBox, and Sentinel is up no error, my masternodes is already up for 15 hous and i have got my first masternode payment (in 12hous) but I still cannot see my masternodes in my masternode tab, but my masternode status is ENABLE (better install using BTDX guide). So guys for windows masternodes, follow @GhostMinerBox every step, if it is not work out try reinstall the master nodes by using
 steps ( which is for BTDX but you can follow it)  from https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# and the follow@GhostMinerBox step, hopefully all of you problem will solved. Every thing that i type here is from   @GhostMinerBox post, so I thank you bro for helping the windows masternodes owner, you're a hero man. Once again thank you bro.

[captainbluff]

The qt wallet is using 1.5GB ram on my VPS ? Is it normal ?

Limit your connections to 10 and don't use the filter list under the "all masternode tab". Or you can always restart the wallet every 24 hours.