cryptonitro
|
|
November 14, 2017, 01:59:46 PM |
|
Technicaly the best way for blissz is to have fee .selling it is only possible with server who can verify each serial with a valid number , in other way people will share it for free. Fee is the smart choice i think. I would have skill to help but i havent enough
@blissz check last topic to have default voltage , enjoy
|
The only project make me believe ... Holochain
|
|
|
dlethe
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 14, 2017, 02:25:12 PM |
|
Let me make this clear, changing to a different algorithm is NON-TRIVIAL, but doable.
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
|
|
|
|
dashcoin1
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 14, 2017, 02:34:58 PM |
|
I have some great news guys!
I successfully modified the following: - unlocked ASIC voltage from software. You can now increase or decrease the ASIC voltage from software This can save a lot of power / heat and noise. i.e. I run my D3 at 15Gh/s at below 700 watts instead of 19Gh/s @ 1200watts. On the other hand you can also decide to overclock your unit if your PSU can handle it with this unlocked vcore. - removed fast FAN startup. (very annoying for users that run this miner at home) - unlocked full fan control. No more minimum fan checks. It removed the low fan warnings as well. I need to mod the webinterface as well and do some testing so it will take roughly one more week before I will release the first firmware version I guess This first version is mainly aimed at home users to get a better power usage / hashrate balance and run it as silent as possible before you ask: Adding new algorithms will be on the list for future versions other feature requests are welcome of course I want to download this quite software mod. we can pay many or dashcoin for this mod !how long we can to use it?
|
|
|
|
kats2005
Newbie
Offline
Activity: 16
Merit: 0
|
|
November 14, 2017, 03:16:42 PM |
|
Let me make this clear, changing to a different algorithm is NON-TRIVIAL, but doable.
It is a deal-killer if the published source code isn't ALL the source code to the miner application. For all I know there are some other daemons that are not published, that get in, get out at boot time, or at other intervals that modify the miner logic. (That is what I would do, so I would be surprised if bitmain didn't do the same thing).
So anybody who has worked with that source code .. have you tried to compile the published code, and do you end up with the same binary?
How do you ssh into the kernel? Does published source code exist for everything?
try this to ssh into D3 http://www.awesomeminer.com/help/antminerapi.aspxTHEN SIMPLY ssh username@192.168.1.X 'enter password'
|
|
|
|
stugots2
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
November 14, 2017, 03:34:39 PM |
|
I hear great things about awesome miner.
|
|
|
|
dlethe
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 14, 2017, 03:52:56 PM |
|
Thank you - can ssh no problem. It is all downhill from here
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 04:45:49 PM Last edit: November 14, 2017, 05:41:47 PM by detonyle |
|
regarding voltage did you tune using some custom parameters into /config/cgminer.conf
because editing freq & other parameters worsk fine in this file.
Did you get the default voltage applied to asic ship? The. We can modify with bitmain-voltage" : "xxxx"
|
|
|
|
D3 Antminer
|
|
November 14, 2017, 05:44:01 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 05:51:00 PM Last edit: November 14, 2017, 06:40:57 PM by detonyle |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo...
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 06:48:20 PM |
|
regarding bitmain-voltage parameters in source code it's look like
bitmain-voltage = 176 // so something like 1.76V
does someone can verify this?
|
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 07:03:26 PM |
|
yes in this folder you have the 11 algo code used for X11.... so need to recompile something with only groestl or other.... but i think something more will be needed ^^
|
|
|
|
Maicol792
Legendary
Offline
Activity: 1260
Merit: 1010
|
|
November 14, 2017, 07:04:40 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo... infact good poin ... we need know how change command (possibly via ssh) send a command to cgminer on d3 to change algo and try if mining work... anyone can help in this?
|
|
|
|
D3 Antminer
|
|
November 14, 2017, 07:22:59 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo... infact good poin ... we need know how change command (possibly via ssh) send a command to cgminer on d3 to change algo and try if mining work... anyone can help in this? I think we have to find the right people first. Possibly more than one professional needed such a work. I must confess it seems really complicated work for most of us ,even developers . I have communicate with ck ,the developer of cgminer yesterday but he is not interested. So who is the one we need?
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 07:26:35 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo... infact good poin ... we need know how change command (possibly via ssh) send a command to cgminer on d3 to change algo and try if mining work... anyone can help in this? We need more than this..in SSH you can restart cgminer with other parameters Aka : fan..or voltage (i have the parameters and a possible value for this) But in term of algo..i think we need to recompile cgminer from source (changing stuff to have only groestl for example) So it will require more investigation but I will continue on this
|
|
|
|
Maicol792
Legendary
Offline
Activity: 1260
Merit: 1010
|
|
November 14, 2017, 07:38:19 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo... infact good poin ... we need know how change command (possibly via ssh) send a command to cgminer on d3 to change algo and try if mining work... anyone can help in this? We need more than this..in SSH you can restart cgminer with other parameters Aka : fan..or voltage (i have the parameters and a possible value for this) But in term of algo..i think we need to recompile cgminer from source (changing stuff to have only groestl for example) So it will require more investigation but I will continue on this please public this parameters do you have...
|
|
|
|
detonyle
Member
Offline
Activity: 140
Merit: 10
|
|
November 14, 2017, 07:42:24 PM |
|
we are talking about possibility to adding more algos for D3 with this topic , not only fan mod , right ?
If think we should start from the beginning... fan mod...voltage mode so increase efficiency... then if it's possible add algo but not sure about this point and we are Ok to say X11 it a chain of 11 algo.... (blake, bmw, groestl, jh, keccak, skein, luffa, cubehash, shavite, simd, and echo.) so that mean the asics 'know' how to do some groestl algo... infact good poin ... we need know how change command (possibly via ssh) send a command to cgminer on d3 to change algo and try if mining work... anyone can help in this? We need more than this..in SSH you can restart cgminer with other parameters Aka : fan..or voltage (i have the parameters and a possible value for this) But in term of algo..i think we need to recompile cgminer from source (changing stuff to have only groestl for example) So it will require more investigation but I will continue on this please public this parameters do you have... into cgminer.conf you can use "bitmain-voltage" : "xxx" but Need to double check the default value (I think it's 176 => 1.76V) but don't do it if you are not sure
|
|
|
|
caymanguy
Member
Offline
Activity: 112
Merit: 10
|
|
November 14, 2017, 08:10:27 PM |
|
|
|
|
|
exsexs1
Newbie
Offline
Activity: 31
Merit: 0
|
|
November 14, 2017, 08:42:51 PM |
|
regarding bitmain-voltage parameters in source code it's look like
bitmain-voltage = 176 // so something like 1.76V
does someone can verify this?
yes, I checked, but not worked for me. I changed freq in cgminer.conf which is work fine, but bitmain-voltage not. Tested 176, 0176, 0725, 0625. Same 970w with 500 freq. I think we need to use another parameters. I saw into cgminer source code and looks like this: OPT_WITH_ARG("--bitmain-voltage", set_int_0_to_9999,opt_show_intval, &opt_bitmain_DASH_voltage, "Set voltage"), it should work, but I think there is something missing.
|
|
|
|
caymanguy
Member
Offline
Activity: 112
Merit: 10
|
|
November 14, 2017, 08:45:34 PM |
|
regarding bitmain-voltage parameters in source code it's look like
bitmain-voltage = 176 // so something like 1.76V
does someone can verify this?
yes, I checked, but not worked for me. I changed freq in cgminer.conf which is work fine, but bitmain-voltage not. Tested 176, 0176, 0725, 0625. Same 970w with 500 freq. I think we need to use another parameters. thxxxxxxxxxxx at least u try with the bitshit
|
|
|
|
|