Bitcoin Forum
May 05, 2024, 10:41:39 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Bitcoin Forum > Alternate cryptocurrencies > Mining (Altcoins) > Antminer D3 Blissz firmware (10/12 v1.12 update)
Poll
Question: What feature you want to see next?
auto tune each mining board - 45 (35.7%)
3 profile switch support (low noise, normal, high performance mode) - 13 (10.3%)
day / night speed schedule - 10 (7.9%)
pool balance / quota option - 9 (7.1%)
v2 configurable reboot on low hashrate / HW errors - 16 (12.7%)
DONE: cgminer v4.10 update - 4 (3.2%)
miner shutdown (+ on high temps) - 11 (8.7%)
better pool management - 9 (7.1%)
DONE:better awesome miner compatibility - 3 (2.4%)
move FAN settings to advanced page - 2 (1.6%)
<your idea> - 4 (3.2%)
Total Voters: 126

Pages: « 1 ... 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 [53] 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 ... 126 »
« previous topic next topic »
  Print  
Author Topic: Antminer D3 Blissz firmware (10/12 v1.12 update)  (Read 125816 times)
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 05:26:27 PM
 #1041
Quote
Nov 27 17:24:28 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 17:24:28 (none) local0.warn cgminer: Error in configuration file, partially loaded.
Nov 27 17:24:28 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 17:24:28 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detect total chain num 3
Nov 27 17:24:28 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 17:24:28 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 17:24:29 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:29 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:30 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:31 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:31 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:32 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 17:24:35 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:36 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 17:24:37 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 0
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 1
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 2
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: open device over
Nov 27 17:24:39 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 17:24:39 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 17:24:40 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new

Quote
AntMiner
Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1
54
537
0.00000
0
0
0
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2
60
537
6659.95
0
42
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
537
6666.11
0
39
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
Transactions must be included in a block to be properly completed. When you send a transaction, it is broadcast to miners. Miners can then optionally include it in their next blocks. Miners will be more inclined to include your transaction if it has a higher transaction fee.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1714948899
Hero Member
*
Offline Offline

Posts: 1714948899

View Profile Personal Message (Offline)

Ignore
1714948899
1714948899
Reply with quote  #2
1714948899
Report to moderator
1714948899
Hero Member
*
Offline Offline

Posts: 1714948899

View Profile Personal Message (Offline)

Ignore
1714948899
1714948899
Reply with quote  #2
1714948899
Report to moderator
1714948899
Hero Member
*
Offline Offline

Posts: 1714948899

View Profile Personal Message (Offline)

Ignore
1714948899
1714948899
Reply with quote  #2
1714948899
Report to moderator
blissz (OP)
Sr. Member
****
Offline Offline

Activity: 336
Merit: 258


View Profile
November 27, 2017, 06:08:37 PM
 #1042
Quote from: BartoszN1990 on November 27, 2017, 05:26:27 PM
Quote
Nov 27 17:24:28 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 17:24:28 (none) local0.warn cgminer: Error in configuration file, partially loaded.
Nov 27 17:24:28 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 17:24:28 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detect total chain num 3
Nov 27 17:24:28 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 17:24:28 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 17:24:29 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:29 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:30 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:31 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:31 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:32 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 17:24:35 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:36 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 17:24:37 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 0
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 1
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 2
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: open device over
Nov 27 17:24:39 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 17:24:39 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 17:24:40 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new

Quote
AntMiner
Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1
54
537
0.00000
0
0
0
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2
60
537
6659.95
0
42
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
537
6666.11
0
39
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo


The logs are clear mate Smiley Did you try the things I posted? It's good to know if it's firmware or hardware related
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 06:16:55 PM
 #1043
Quote from: blissz on November 27, 2017, 06:08:37 PM
Quote from: BartoszN1990 on November 27, 2017, 05:26:27 PM
Quote
Nov 27 17:24:28 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 17:24:28 (none) local0.warn cgminer: Error in configuration file, partially loaded.
Nov 27 17:24:28 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 17:24:28 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 17:24:28 (none) local0.notice cgminer[375]: detect total chain num 3
Nov 27 17:24:28 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 17:24:28 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 17:24:29 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:29 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:30 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:31 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:31 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:32 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:33 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 17:24:33 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 17:24:35 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:36 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 17:24:37 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 17:24:37 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 0
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO1 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 1
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO2 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: tty_init chainid = 2
Nov 27 17:24:39 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 17:24:39 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO4 ok
Nov 27 17:24:39 (none) local0.notice cgminer[375]: open device over
Nov 27 17:24:39 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 17:24:39 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 17:24:40 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 17:24:40 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new

Quote
AntMiner
Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1
54
537
0.00000
0
0
0
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2
60
537
6659.95
0
42
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
537
6666.11
0
39
57
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo


The logs are clear mate Smiley Did you try the things I posted? It's good to know if it's firmware or hardware related

Yes, i rebot, reinstal fw, i check reinstal oryginal bitmain the same .. when i change to 400 m result the same .. one timest i se chain 1 in system one times not .. if i see i se 54 chips and xxxxx

when i change 400 m i dont se here at miner status. only when i put deeflaut setings
▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 06:27:42 PM
 #1044
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo


Full kernel log:

Quote
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015439] pid_max: default: 32768 minimum: 301
[    0.015668] Security Framework initialized
[    0.015763] Mount-cache hash table entries: 512
[    0.024600] Initializing cgroup subsys cpuacct
[    0.024632] Initializing cgroup subsys memory
[    0.024695] Initializing cgroup subsys blkio
[    0.024834] CPU: Testing write buffer coherency: ok
[    0.025405] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025482] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026812] Brought up 1 CPUs
[    0.026837] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028137] devtmpfs: initialized
[    0.092532] pinctrl core: initialized pinctrl subsystem
[    0.092748] rstctl core: initialized rstctl subsystem
[    0.093241] regulator-dummy: no parameters
[    0.093805] NET: Registered protocol family 16
[    0.094509] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104177] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104360] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105460] platform 49000000.edma: alias fck already exists
[    0.105493] platform 49000000.edma: alias fck already exists
[    0.105521] platform 49000000.edma: alias fck already exists
[    0.106671] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106852] OMAP GPIO hardware version 0.1
[    0.108268] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109577] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110889] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111520] of_get_named_gpio_flags exited with status 52
[    0.111553] gpio-rctrl rstctl.3: loaded OK
[    0.116660] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119865] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122033] cpsw.0: No hwaddr in dt. Using 90:70:65:30:e0:f3 from efuse
[    0.122065] cpsw.1: No hwaddr in dt. Using 90:70:65:30:e0:f5 from efuse
[    0.137624] bio: create slab <bio-0> at 0
[    0.149762] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.150004] of_get_named_gpio_flags: can't parse gpios property
[    0.150293] vmmcsd_fixed: 3300 mV
[    0.153404] SCSI subsystem initialized
[    0.153860] usbcore: registered new interface driver usbfs
[    0.153973] usbcore: registered new interface driver hub
[    0.154308] usbcore: registered new device driver usb
[    0.156410] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156444] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156640] media: Linux media interface: v0.10
[    0.156736] Linux video capture interface: v2.00
[    0.156852] pps_core: LinuxPPS API ver. 1 registered
[    0.156868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157585] Advanced Linux Sound Architecture Driver Initialized.
[    0.158780] Switching to clocksource gp_timer
[    0.176774] NET: Registered protocol family 2
[    0.177769] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177857] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177946] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178039] TCP: reno registered
[    0.178066] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178111] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178605] NET: Registered protocol family 1
[    0.179198] RPC: Registered named UNIX socket transport module.
[    0.179220] RPC: Registered udp transport module.
[    0.179234] RPC: Registered tcp transport module.
[    0.179248] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179635] Trying to unpack rootfs image as initramfs...
[    1.942040] Freeing initrd memory: 12240K
[    1.942759] CPU PMU: probing PMU on CPU 0
[    1.942794] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.943340] omap2_mbox_probe: platform not supported
[    1.947239] VFS: Disk quotas dquot_6.5.2
[    1.947479] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.948886] NFS: Registering the id_resolver key type
[    1.948981] Key type id_resolver registered
[    1.948998] Key type id_legacy registered
[    1.949066] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.949496] msgmni has been set to 490
[    1.952369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.952396] io scheduler noop registered
[    1.952412] io scheduler deadline registered
[    1.952468] io scheduler cfq registered (default)
[    1.956542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.958970] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.959260] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.620083] console [ttyO0] enabled
[    2.624620] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.633273] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.641950] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.650553] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.659582] [drm] Initialized drm 1.1.0 20060810
[    2.678245] brd: module loaded
[    2.688533] loop: module loaded
[    2.692755] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.702702] nand_get_flash_type: 2c,da against 2c,da
[    2.708230] ONFI param page 0 valid
[    2.711903] ONFI flash detected
[    2.715223] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.727135] omap2-nand: detected x8 NAND flash
[    2.731801] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.737382] omap2-nand: using custom ecc layout
[    2.742226] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.748620] Creating 10 MTD partitions on "omap2-nand.0":
[    2.754297] 0x000000000000-0x000000020000 : "spl"
[    2.761119] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.768587] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.775952] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.783361] 0x000000080000-0x000000240000 : "u-boot"
[    2.791562] 0x000000240000-0x000000260000 : "bootenv"
[    2.798520] 0x000000260000-0x000000280000 : "fdt"
[    2.805110] 0x000000280000-0x000000780000 : "kernel"
[    2.816135] 0x000000800000-0x000001c00000 : "root"
[    2.839637] 0x000001c00000-0x000003000000 : "config"
[    2.863426] OneNAND driver initializing
[    2.869164] usbcore: registered new interface driver asix
[    2.874982] usbcore: registered new interface driver cdc_ether
[    2.881230] usbcore: registered new interface driver smsc95xx
[    2.887348] usbcore: registered new interface driver net1080
[    2.893372] usbcore: registered new interface driver cdc_subset
[    2.899665] usbcore: registered new interface driver zaurus
[    2.905673] usbcore: registered new interface driver cdc_ncm
[    2.912414] usbcore: registered new interface driver cdc_acm
[    2.918370] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.926750] Initializing USB Mass Storage driver...
[    2.931990] usbcore: registered new interface driver usb-storage
[    2.938290] USB Mass Storage support registered.
[    2.943331] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.950084] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.955321] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.964093] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.964115] musb-hdrc: MHDRC RTL version 2.0
[    2.964130] musb-hdrc: setup fifo_mode 4
[    2.964158] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.964304] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.969347] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.975407] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.980647] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.989416] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.989436] musb-hdrc: MHDRC RTL version 2.0
[    2.989450] musb-hdrc: setup fifo_mode 4
[    2.989472] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.989615] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.994657] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.999965] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.006645] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.014884] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.014990] usb usb1: default language 0x0409
[    3.015049] usb usb1: udev 1, busnum 1, minor = 0
[    3.015072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.022199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.029771] usb usb1: Product: MUSB HDRC host driver
[    3.034986] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.040653] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.046631] usb usb1: usb_probe_device
[    3.046659] usb usb1: configuration #1 chosen from 1 choice
[    3.046726] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.046928] hub 1-0:1.0: usb_probe_interface
[    3.046950] hub 1-0:1.0: usb_probe_interface - got id
[    3.046978] hub 1-0:1.0: USB hub found
[    3.050981] hub 1-0:1.0: 1 port detected
[    3.055119] hub 1-0:1.0: standalone hub
[    3.055138] hub 1-0:1.0: individual port power switching
[    3.055156] hub 1-0:1.0: no over-current protection
[    3.055173] hub 1-0:1.0: Single TT
[    3.055194] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.055213] hub 1-0:1.0: power on to power good time: 10ms
[    3.055269] hub 1-0:1.0: local power source is good
[    3.055418] hub 1-0:1.0: enabling power on all ports
[    3.056478] mousedev: PS/2 mouse device common for all mice
[    3.064411] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.071911] 44e3e000.rtc: already running
[    3.076407] i2c /dev entries driver
[    3.081452] pps_ldisc: PPS line discipline registered
[    3.086926] Driver for 1-wire Dallas network protocol.
[    3.094207] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.101772] cpuidle: using governor ladder
[    3.106100] cpuidle: using governor menu
[    3.110675] of_get_named_gpio_flags exited with status 6
[    3.110694] of_get_named_gpio_flags: can't parse gpios property
[    3.110710] of_get_named_gpio_flags: can't parse gpios property
[    3.110746] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.117971] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.124785] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.132004] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.139367] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.146310] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.157051] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.180964] of_get_named_gpio_flags exited with status -517
[    3.181032] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.188810] ledtrig-cpu: registered to indicate activity on CPUs
[    3.195587] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.202778] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.210947] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.217243] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.224423] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.236672] usbcore: registered new interface driver usbhid
[    3.242591] usbhid: USB HID core driver
[    3.249496] TCP: cubic registered
[    3.253020] Initializing XFRM netlink socket
[    3.257589] NET: Registered protocol family 17
[    3.262484] NET: Registered protocol family 15
[    3.267332] Key type dns_resolver registered
[    3.271970] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.280054] ThumbEE CPU extension supported.
[    3.284564] Registering SWP/SWPB emulation handler
[    3.290575] registered taskstats version 1
[    3.297196] of_get_named_gpio_flags exited with status -517
[    3.297270] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.354249] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.360696] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.375230] libphy: 4a101000.mdio: probed
[    3.379549] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.389790] Detected MACID = 90:70:65:30:e0:f3
[    3.394475] cpsw 4a100000.ethernet: NAPI disabled
[    3.399867] of_get_named_gpio_flags exited with status -517
[    3.399932] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.408656] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.417939] cpu0 supply cpu0 not found, using dummy regulator
[    3.424432] cpufreq_cpu0: failed to scale voltage up: -22
[    3.430247] cpufreq_cpu0: failed to scale voltage up: -22
[    3.443006] ALSA device list:
[    3.446240]   No soundcards found.
[    3.450793] Freeing init memory: 264K
[    3.454845] Failed to execute /init
[    4.524669] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.905128] net eth0: initializing cpsw version 1.12 (0)
[    5.914056] net eth0: phy found : id is : 0x7c0f1
[    5.919500] libphy: PHY 4a101000.mdio:01 not found
[    5.924697] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.989470] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Nov 27 18:21:02 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Nov 27 18:21:02 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 18:21:02 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 18:21:02 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:02 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:04 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:04 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:05 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:05 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:06 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detect total chain num 3
Nov 27 18:21:06 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 18:21:06 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 18:21:07 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:08 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:08 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:09 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:10 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:10 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:11 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:12 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:12 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:12 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 18:21:14 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:15 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:16 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:17 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 18:21:17 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:17 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:18 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:19 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:20 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:22 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:23 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:25 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:26 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:27 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 30 ASICs
Nov 27 18:21:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:28 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:28 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:28 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:30 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:31 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:32 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Nov 27 18:21:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:33 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:33 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:33 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:35 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:36 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:37 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Nov 27 18:21:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:38 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:38 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:38 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 18:21:38 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 18:21:38 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Nov 27 18:21:38 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:21:38 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:21:38 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:21:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 18:21:39 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:21:40 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 18:21:40 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Nov 27 18:21:40 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: 0 calibration_sensor_offset_chain
Nov 27 18:21:41 (none) local0.notice cgminer[375]: chain:0 local:0 remote:0
Nov 27 18:21:41 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:21:42 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:21:42 (none) local0.notice cgminer[375]: 1 calibration_sensor_offset_chain
Nov 27 18:21:42 (none) local0.notice cgminer[375]: chain:1 local:10 remote:12
Nov 27 18:21:42 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Nov 27 18:21:42 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Nov 27 18:21:42 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Nov 27 18:21:43 (none) local0.notice cgminer[375]: chain:2 local:10 remote:16
Nov 27 18:21:43 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:43 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -6,
Nov 27 18:21:43 (none) local0.notice cgminer[375]: chain:2 local:10 remote:9
Nov 27 18:21:43 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:44 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:21:44 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Nov 27 18:21:45 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Nov 27 18:21:45 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Nov 27 18:21:45 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:45 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Nov 27 18:21:45 (none) local0.notice cgminer[375]: frequency = '350'
Nov 27 18:21:45 (none) local0.notice cgminer[375]: dev.timeout = 862812 us
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:48 (none) local0.err cgminer[375]: cgminer time error total_secs = 1511806908.925045 last_total_secs = 1.000000
Nov 27 18:21:50 (none) local0.warn cgminer[375]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Nov 27 18:21:50 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Nov 27 18:21:50 (none) local0.err cgminer[375]: D1 0: work 7f not find error
Nov 27 18:21:55 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Nov 27 18:23:49 (none) local0.notice cgminer[375]: chain 0 reinit 0.00
Nov 27 18:23:50 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:23:52 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:23:52 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:23:52 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: open device over
Nov 27 18:23:52 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:23:52 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:23:53 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:23:53 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:23:53 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:23:53 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:23:54 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:23:54 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:25:51 (none) local0.notice cgminer[375]: chain 0 reinit 0.00
Nov 27 18:25:52 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:25:54 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:25:54 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:25:54 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: open device over
Nov 27 18:25:54 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:25:54 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:25:55 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:25:55 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:25:55 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:25:55 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:25:56 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:25:56 (none) local0.notice cgminer[375]: open_core_chain
▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
blissz (OP)
Sr. Member
****
Offline Offline

Activity: 336
Merit: 258


View Profile
November 27, 2017, 06:38:09 PM
 #1045
Quote from: BartoszN1990 on November 27, 2017, 06:27:42 PM
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo



This is then a hardware problem. I am afraid you have to RMA the first board. My advice to keep mining on the two other boards (the latest custom firmware can run with 2 chains connected)
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 06:41:34 PM
 #1046
Quote from: blissz on November 27, 2017, 06:38:09 PM
Quote from: BartoszN1990 on November 27, 2017, 06:27:42 PM
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo



This is then a hardware problem. I am afraid you have to RMA the first board. My advice to keep mining on the two other boards (the latest custom firmware can run with 2 chains connected)

There is no reason to send it back to china is expensive to send and collect + time ti waitng.. So what one chain go rubish ? or there is posible to fix it ? .. i change place chain and show the same

Quote
Nov 27 18:38:22 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:38:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Nov 27 18:38:22 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 54 ASIC, and addrInterval is 1
Nov 27 18:38:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1

So i thing yes chain is broken .... Where i can diagniostick one chain or fix ?

▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
deathless
Newbie
*
Offline Offline

Activity: 18
Merit: 0


View Profile
November 27, 2017, 06:43:53 PM
 #1047
Quote from: BartoszN1990 on November 27, 2017, 06:41:34 PM
Quote from: blissz on November 27, 2017, 06:38:09 PM
Quote from: BartoszN1990 on November 27, 2017, 06:27:42 PM
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo



This is then a hardware problem. I am afraid you have to RMA the first board. My advice to keep mining on the two other boards (the latest custom firmware can run with 2 chains connected)

There is no reason to send it back to china is expensive to send and collect + time ti waitng.. So what one chain go rubish ? or there is posible to fix it ? .. i change place chain and show the same

Quote
Nov 27 18:38:22 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:38:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Nov 27 18:38:22 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 54 ASIC, and addrInterval is 1
Nov 27 18:38:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1

So i thing yes chain is broken .... Where i can diagniostick one chain or fix ?



Have you tried to unplug the other 2 chains and see if the one that isnt working boot in?
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 06:47:38 PM
 #1048
Quote from: deathless on November 27, 2017, 06:43:53 PM
Quote from: BartoszN1990 on November 27, 2017, 06:41:34 PM
Quote from: blissz on November 27, 2017, 06:38:09 PM
Quote from: BartoszN1990 on November 27, 2017, 06:27:42 PM
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo



This is then a hardware problem. I am afraid you have to RMA the first board. My advice to keep mining on the two other boards (the latest custom firmware can run with 2 chains connected)

There is no reason to send it back to china is expensive to send and collect + time ti waitng.. So what one chain go rubish ? or there is posible to fix it ? .. i change place chain and show the same

Quote
Nov 27 18:38:22 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:38:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Nov 27 18:38:22 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 54 ASIC, and addrInterval is 1
Nov 27 18:38:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1

So i thing yes chain is broken .... Where i can diagniostick one chain or fix ?



Have you tried to unplug the other 2 chains and see if the one that isnt working boot in?

when i unplug other 2 and restart system show fail and dosnt start i thing i must start with 3 i will try now
▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
silvioraof
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
November 27, 2017, 07:04:46 PM
 #1049
With this firmware ...does anyone tried to use a different PSU ?? Less than 1600 w?
Could I use a 1200 or 1k ?
BartoszN1990
Full Member
***
Offline Offline

Activity: 218
Merit: 100


https://deeponion.org


View Profile
November 27, 2017, 07:08:27 PM
 #1050
Quote from: deathless on November 27, 2017, 06:43:53 PM
Quote from: BartoszN1990 on November 27, 2017, 06:41:34 PM
Quote from: blissz on November 27, 2017, 06:38:09 PM
Quote from: BartoszN1990 on November 27, 2017, 06:27:42 PM
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo



This is then a hardware problem. I am afraid you have to RMA the first board. My advice to keep mining on the two other boards (the latest custom firmware can run with 2 chains connected)

There is no reason to send it back to china is expensive to send and collect + time ti waitng.. So what one chain go rubish ? or there is posible to fix it ? .. i change place chain and show the same

Quote
Nov 27 18:38:22 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:38:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Nov 27 18:38:22 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 54 ASIC, and addrInterval is 1
Nov 27 18:38:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:38:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1

So i thing yes chain is broken .... Where i can diagniostick one chain or fix ?



Have you tried to unplug the other 2 chains and see if the one that isnt working boot in?

I unplug 2 chain and left only one. system dosnt start ...

Quote
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000355] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015435] pid_max: default: 32768 minimum: 301
[    0.015666] Security Framework initialized
[    0.015761] Mount-cache hash table entries: 512
[    0.024599] Initializing cgroup subsys cpuacct
[    0.024631] Initializing cgroup subsys memory
[    0.024693] Initializing cgroup subsys blkio
[    0.024831] CPU: Testing write buffer coherency: ok
[    0.025406] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025482] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026807] Brought up 1 CPUs
[    0.026829] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028124] devtmpfs: initialized
[    0.092510] pinctrl core: initialized pinctrl subsystem
[    0.092725] rstctl core: initialized rstctl subsystem
[    0.093218] regulator-dummy: no parameters
[    0.093786] NET: Registered protocol family 16
[    0.094486] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104152] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104336] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105420] platform 49000000.edma: alias fck already exists
[    0.105454] platform 49000000.edma: alias fck already exists
[    0.105482] platform 49000000.edma: alias fck already exists
[    0.106628] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106809] OMAP GPIO hardware version 0.1
[    0.108209] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109525] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110843] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111473] of_get_named_gpio_flags exited with status 52
[    0.111503] gpio-rctrl rstctl.3: loaded OK
[    0.116609] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119820] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122011] cpsw.0: No hwaddr in dt. Using 90:70:65:30:e0:f3 from efuse
[    0.122042] cpsw.1: No hwaddr in dt. Using 90:70:65:30:e0:f5 from efuse
[    0.137599] bio: create slab <bio-0> at 0
[    0.149725] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149967] of_get_named_gpio_flags: can't parse gpios property
[    0.150254] vmmcsd_fixed: 3300 mV
[    0.153365] SCSI subsystem initialized
[    0.153814] usbcore: registered new interface driver usbfs
[    0.153928] usbcore: registered new interface driver hub
[    0.154270] usbcore: registered new device driver usb
[    0.156378] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156412] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156608] media: Linux media interface: v0.10
[    0.156702] Linux video capture interface: v2.00
[    0.156819] pps_core: LinuxPPS API ver. 1 registered
[    0.156835] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157556] Advanced Linux Sound Architecture Driver Initialized.
[    0.158744] Switching to clocksource gp_timer
[    0.176777] NET: Registered protocol family 2
[    0.177769] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177858] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177947] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178040] TCP: reno registered
[    0.178067] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178113] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178609] NET: Registered protocol family 1
[    0.179198] RPC: Registered named UNIX socket transport module.
[    0.179218] RPC: Registered udp transport module.
[    0.179232] RPC: Registered tcp transport module.
[    0.179245] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179634] Trying to unpack rootfs image as initramfs...
[    1.941896] Freeing initrd memory: 12240K
[    1.942633] CPU PMU: probing PMU on CPU 0
[    1.942669] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.943215] omap2_mbox_probe: platform not supported
[    1.947131] VFS: Disk quotas dquot_6.5.2
[    1.947368] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.948765] NFS: Registering the id_resolver key type
[    1.948858] Key type id_resolver registered
[    1.948874] Key type id_legacy registered
[    1.948941] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.949377] msgmni has been set to 490
[    1.952273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.952300] io scheduler noop registered
[    1.952316] io scheduler deadline registered
[    1.952373] io scheduler cfq registered (default)
[    1.956442] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.958870] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.959154] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.619944] console [ttyO0] enabled
[    2.624517] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.633187] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.641870] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.650476] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.659498] [drm] Initialized drm 1.1.0 20060810
[    2.678176] brd: module loaded
[    2.688462] loop: module loaded
[    2.692691] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.702624] nand_get_flash_type: 2c,da against 2c,da
[    2.708149] ONFI param page 0 valid
[    2.711822] ONFI flash detected
[    2.715139] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.727051] omap2-nand: detected x8 NAND flash
[    2.731716] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.737298] omap2-nand: using custom ecc layout
[    2.742140] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.748535] Creating 10 MTD partitions on "omap2-nand.0":
[    2.754213] 0x000000000000-0x000000020000 : "spl"
[    2.761022] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.768482] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.775850] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.783264] 0x000000080000-0x000000240000 : "u-boot"
[    2.791475] 0x000000240000-0x000000260000 : "bootenv"
[    2.798439] 0x000000260000-0x000000280000 : "fdt"
[    2.805026] 0x000000280000-0x000000780000 : "kernel"
[    2.816058] 0x000000800000-0x000001c00000 : "root"
[    2.839552] 0x000001c00000-0x000003000000 : "config"
[    2.863332] OneNAND driver initializing
[    2.869073] usbcore: registered new interface driver asix
[    2.874889] usbcore: registered new interface driver cdc_ether
[    2.881133] usbcore: registered new interface driver smsc95xx
[    2.887257] usbcore: registered new interface driver net1080
[    2.893297] usbcore: registered new interface driver cdc_subset
[    2.899592] usbcore: registered new interface driver zaurus
[    2.905598] usbcore: registered new interface driver cdc_ncm
[    2.912342] usbcore: registered new interface driver cdc_acm
[    2.918303] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.926683] Initializing USB Mass Storage driver...
[    2.931922] usbcore: registered new interface driver usb-storage
[    2.938221] USB Mass Storage support registered.
[    2.943267] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.950021] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.955258] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.964028] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.964050] musb-hdrc: MHDRC RTL version 2.0
[    2.964065] musb-hdrc: setup fifo_mode 4
[    2.964093] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.964237] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.969280] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.975339] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.980577] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.989346] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.989366] musb-hdrc: MHDRC RTL version 2.0
[    2.989380] musb-hdrc: setup fifo_mode 4
[    2.989402] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.989539] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.994583] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.999892] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.006570] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.014815] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.014920] usb usb1: default language 0x0409
[    3.014978] usb usb1: udev 1, busnum 1, minor = 0
[    3.015002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.022130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.029703] usb usb1: Product: MUSB HDRC host driver
[    3.034918] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.040586] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.046565] usb usb1: usb_probe_device
[    3.046591] usb usb1: configuration #1 chosen from 1 choice
[    3.046656] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.046857] hub 1-0:1.0: usb_probe_interface
[    3.046879] hub 1-0:1.0: usb_probe_interface - got id
[    3.046907] hub 1-0:1.0: USB hub found
[    3.050908] hub 1-0:1.0: 1 port detected
[    3.055046] hub 1-0:1.0: standalone hub
[    3.055066] hub 1-0:1.0: individual port power switching
[    3.055084] hub 1-0:1.0: no over-current protection
[    3.055102] hub 1-0:1.0: Single TT
[    3.055123] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.055143] hub 1-0:1.0: power on to power good time: 10ms
[    3.055197] hub 1-0:1.0: local power source is good
[    3.055348] hub 1-0:1.0: enabling power on all ports
[    3.056409] mousedev: PS/2 mouse device common for all mice
[    3.064355] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.072126] i2c /dev entries driver
[    3.077179] pps_ldisc: PPS line discipline registered
[    3.082677] Driver for 1-wire Dallas network protocol.
[    3.089965] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.097537] cpuidle: using governor ladder
[    3.101862] cpuidle: using governor menu
[    3.106455] of_get_named_gpio_flags exited with status 6
[    3.106477] of_get_named_gpio_flags: can't parse gpios property
[    3.106493] of_get_named_gpio_flags: can't parse gpios property
[    3.106530] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.113768] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.120583] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.127806] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.135132] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.142088] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.156997] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.177023] of_get_named_gpio_flags exited with status -517
[    3.177091] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.184867] ledtrig-cpu: registered to indicate activity on CPUs
[    3.191648] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.198842] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.206951] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.213297] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.220480] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.232734] usbcore: registered new interface driver usbhid
[    3.238650] usbhid: USB HID core driver
[    3.245542] TCP: cubic registered
[    3.249065] Initializing XFRM netlink socket
[    3.253631] NET: Registered protocol family 17
[    3.258514] NET: Registered protocol family 15
[    3.263384] Key type dns_resolver registered
[    3.268019] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.276100] ThumbEE CPU extension supported.
[    3.280610] Registering SWP/SWPB emulation handler
[    3.286625] registered taskstats version 1
[    3.293251] of_get_named_gpio_flags exited with status -517
[    3.293322] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.350305] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.356717] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.371263] libphy: 4a101000.mdio: probed
[    3.375578] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.385812] Detected MACID = 90:70:65:30:e0:f3
[    3.390493] cpsw 4a100000.ethernet: NAPI disabled
[    3.395882] of_get_named_gpio_flags exited with status -517
[    3.395949] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.404680] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.413959] cpu0 supply cpu0 not found, using dummy regulator
[    3.420443] cpufreq_cpu0: failed to scale voltage up: -22
[    3.426261] cpufreq_cpu0: failed to scale voltage up: -22
[    3.439030] ALSA device list:
[    3.442260]   No soundcards found.
[    3.446819] Freeing init memory: 264K
[    3.450869] Failed to execute /init
[    4.448717] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.772478] net eth0: initializing cpsw version 1.12 (0)
[    5.781403] net eth0: phy found : id is : 0x7c0f1
[    5.786840] libphy: PHY 4a101000.mdio:01 not found
[    5.792036] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.856687] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Nov 27 19:05:23 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Nov 27 19:05:23 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 19:05:23 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 19:05:23 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:23 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 19:05:24 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:24 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 19:05:24 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:24 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 19:05:25 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:25 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:26 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:26 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:27 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 19:05:27 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 19:05:27 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 19:05:27 (none) local0.notice cgminer[375]: detect total chain num 1
Nov 27 19:05:27 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 19:05:27 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 19:05:28 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 19:05:29 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 19:05:29 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 19:05:29 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 19:05:31 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 19:05:31 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 19:05:32 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 19:05:32 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 19:05:32 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 19:05:33 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 19:05:33 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 19:05:34 (none) local0.notice cgminer[375]: open device over
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 19:05:34 (none) local0.notice cgminer[375]: open device over
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Nov 27 19:05:34 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Nov 27 19:05:34 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 19:05:34 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Nov 27 19:05:34 (none) local0.notice cgminer[375]: open device over
Nov 27 19:05:34 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 19:05:34 (none) local0.notice cgminer[375]: open device over
Nov 27 19:05:35 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 19:05:35 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Nov 27 19:05:35 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 19:05:37 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 19:05:37 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 19:05:38 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 19:05:39 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 19:05:39 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 54 ASICs
Nov 27 19:05:39 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 19:05:39 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 19:05:41 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 19:05:41 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 19:05:42 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 19:05:42 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 19:05:43 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 54 ASICs
Nov 27 19:05:43 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 19:05:43 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 19:05:45 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 19:05:45 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 19:05:45 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 19:05:46 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 19:05:47 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 54 ASICs
Nov 27 19:05:47 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 19:05:47 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 19:05:47 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 19:05:47 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Nov 27 19:05:47 (none) local0.notice cgminer[375]: every_chain_get_PIC16F1704_freq_new
Nov 27 19:05:48 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Nov 27 19:05:48 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 1
Nov 27 19:05:48 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 1
Nov 27 19:05:48 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 54 ASIC, and addrInterval is 1
Nov 27 19:05:48 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Nov 27 19:05:49 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 19:05:49 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 19:05:49 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 19:05:49 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 19:05:49 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 19:05:49 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 19:05:49 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 19:05:49 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 19:05:49 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 19:05:49 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 19:05:49 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Nov 27 19:05:50 (none) local0.notice cgminer[375]: chain:2 local:0 remote:0
Nov 27 19:05:50 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 19:05:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Nov 27 19:05:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Nov 27 19:05:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 19:05:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Nov 27 19:05:51 (none) local0.notice cgminer[375]: frequency = '537'
Nov 27 19:05:51 (none) local0.notice cgminer[375]: dev.timeout = 562356 us
Nov 27 19:05:51 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 19:05:51 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 19:05:51 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 19:05:51 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 19:05:54 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:05:54 (none) local0.err cgminer[375]: cgminer time error total_secs = 1511809554.976425 last_total_secs = 1.000000
Nov 27 19:05:56 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:05:59 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:00 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (14)
Nov 27 19:06:02 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:05 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:07 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:10 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:13 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:15 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:18 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:21 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:24 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:26 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:29 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:32 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:34 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:37 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:40 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:43 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:45 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:48 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:51 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:53 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:56 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:06:59 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:07:02 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:07:04 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:07:07 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Nov 27 19:07:10 (none) local0.err cgminer[375]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!

Quote
3   54   537   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
▌▌   Anonymous and Untraceable     ›› ››   DeepOnion  ‹‹ ‹‹     TOR INTEGRATED & SECURED    ▌▌
▬▬▬▬▬▬▬▬▬     ANN  Whitepaper  FACEBOOK  Twitter  Youtube  Forum     ▬▬▬▬▬▬▬▬▬
▌▌   ••  JOIN AIRDROP 🚀  ••  |||   Download DeepOnion   |||   ✅ Verified with DeepVault    ▌▌
deathless
Newbie
*
Offline Offline

Activity: 18
Merit: 0


View Profile
November 27, 2017, 07:13:41 PM
 #1051
Quote from: silvioraof on November 27, 2017, 07:04:46 PM
With this firmware ...does anyone tried to use a different PSU ?? Less than 1600 w?
Could I use a 1200 or 1k ?
im using a 1000watt for mine
blissz (OP)
Sr. Member
****
Offline Offline

Activity: 336
Merit: 258


View Profile
November 27, 2017, 07:22:51 PM
 #1052
Quote from: deathless on November 27, 2017, 07:13:41 PM
Quote from: silvioraof on November 27, 2017, 07:04:46 PM
With this firmware ...does anyone tried to use a different PSU ?? Less than 1600 w?
Could I use a 1200 or 1k ?
im using a 1000watt for mine

At the lowest voltage setting at ~15 / 16GH/s/s you can run it at 750watt - 800watt. So my advice would be to have at least a 900+ watt power supply for this.
Make sure not to connect al boards as you're still on the stock firmware, otherwise you'll blow the PSU. First flash it / set it to the lowest voltage / 400Mhz and then connect all the boards.
deathless
Newbie
*
Offline Offline

Activity: 18
Merit: 0


View Profile
November 27, 2017, 07:32:48 PM
 #1053
Quote from: blissz on November 27, 2017, 07:22:51 PM
Quote from: deathless on November 27, 2017, 07:13:41 PM
Quote from: silvioraof on November 27, 2017, 07:04:46 PM
With this firmware ...does anyone tried to use a different PSU ?? Less than 1600 w?
Could I use a 1200 or 1k ?
im using a 1000watt for mine

At the lowest voltage setting at ~15 / 16GH/s/s you can run it at 750watt - 800watt. So my advice would be to have at least a 900+ watt power supply for this.
Make sure not to connect al boards as you're still on the stock firmware, otherwise you'll blow the PSU. First flash it / set it to the lowest voltage / 400Mhz and then connect all the boards.

Mines pulling 1000watt @17.5gh/s psu was handling 1290 when i first started but I underclocked to 481 and almost 0 errors for the first 24hours
may142012
Member
**
Offline Offline

Activity: 301
Merit: 10


View Profile
November 27, 2017, 07:43:34 PM
 #1054
Just stick to Bitmain's APW3++ 1600W, man. Be safe better than say sorry.
deathless
Newbie
*
Offline Offline

Activity: 18
Merit: 0


View Profile
November 27, 2017, 07:45:23 PM
 #1055
Quote from: may142012 on November 27, 2017, 07:43:34 PM
Just stick to Bitmain's APW3++ 1600W, man. Be safe better than say sorry.
I would but I havent gotten mine from bitmain yet. till today
heythorp
Newbie
*
Offline Offline

Activity: 28
Merit: 0


View Profile
November 27, 2017, 08:49:25 PM
 #1056
These boards are very finiky. Each day (i have to shut down at night) I spend and hour setting them up. Zero consistancy.
may142012
Member
**
Offline Offline

Activity: 301
Merit: 10


View Profile
November 27, 2017, 08:54:54 PM
 #1057
Hey Blissz, if your custom firmware is based on Bitmain's latest firmware, that means your firmware had already supported of extranonce.subscribe (by adding #xnsub stratum+tcp URL parameter), correct?
bcn2048
Newbie
*
Offline Offline

Activity: 104
Merit: 0


View Profile
November 27, 2017, 09:08:43 PM
 #1058
last night I switched pools in D3 miner, saved configuration, then third chain didn't start to mine at all, it showed around 62 O, after 5 minutes O changed to X. This happens for the first time. Restart didn't help, so I shut it down for night and bring it to the apartment.   Next day I unplugged all cables (from PSU and hashing boards), refitted them again, start miner and third chain is back!

Don't know what happened, maybe it was too cold for antminer, I kept it at the attic and there is only 3 celsius degree at night.

What do you think about coldness - could it harm antminer ? I think if you leave it alone without interrupting it should be fine.

I'm on stock firmware (last one) and I  was just about to try Blissz  upgrade
blissz (OP)
Sr. Member
****
Offline Offline

Activity: 336
Merit: 258


View Profile
November 27, 2017, 09:15:24 PM
 #1059
The next version will have the reboot on low hashrate working properly, so hopefully that will solve the problems for some of you that have the loosing chain issue.
blastar
Newbie
*
Offline Offline

Activity: 42
Merit: 0


View Profile
November 27, 2017, 09:33:55 PM
 #1060
Quote from: bcn2048 on November 27, 2017, 09:08:43 PM
last night I switched pools in D3 miner, saved configuration, then third chain didn't start to mine at all, it showed around 62 O, after 5 minutes O changed to X. This happens for the first time. Restart didn't help, so I shut it down for night and bring it to the apartment.   Next day I unplugged all cables (from PSU and hashing boards), refitted them again, start miner and third chain is back!

Don't know what happened, maybe it was too cold for antminer, I kept it at the attic and there is only 3 celsius degree at night.

What do you think about coldness - could it harm antminer ? I think if you leave it alone without interrupting it should be fine.

I'm on stock firmware (last one) and I  was just about to try Blissz  upgrade
I have my D3 miners in the cellar, and 2 weeks ago, it became very cold in my mining room, the temperature was somewhere between 2-3 deg C.  I was shocked to find out that none of my D3 miners could start! they were just dead! I thought right away that it might be the cold, so I took one of the D3s to another warm room (24C.), and after 10 minutes, it started without a problem!  As I didn't want to dismantle the other miners, I just took the one that worked and pointed its hot exhaust air to the intake fans of the other miners using a flexible air ducting hose to warm them up (1 min. was enough for each miner to heat it up). After that, they all started without a problem!
Pages: « 1 ... 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 [53] 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 ... 126 »
  Print  
Bitcoin Forum > Alternate cryptocurrencies > Mining (Altcoins) > Antminer D3 Blissz firmware (10/12 v1.12 update)
 « previous topic next topic »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!