BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

[bible_pay]

I've upgraded my sanctuaries to the latest wallet version (1.4.8.4.) and cleaned them as per Togo's guide. Everything seems to be working fine, but I can't seem to vote.

Code:

Voting failed! Failed to vote 0 time(s). (Check that sanctuaries are DIP3? Also you must wait 3 minutes in-between re-votes due to network rules.)

They are in the DIP3 list and I've been getting rewards consistently. Both controller wallet and sanctuary wallets are on the same chain, and they are not on a fork as far as I can tell...

Can you please post the voting command including the id you are using, as I voted manually for Togos proposal and it worked but I did it from the rpc.

I tried to vote using the GUI. I can't remember the command to pull all the Proposal ID's, and I don't know if I can copy them from the GUI proposal tab   So I can't try it from the rpc for now. How can I find a list of all the current Proposal ID's that I can copy/paste so I can try it from the rpc? There used to be an overview of all the proposals on pool.biblepay.org right?

Ok yes cause I would like to try to reproduce with one that actually throws the gov exception error, so one way, is to type:
gobject list all proposals

Could you try voting on the woocommerce one?  98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7

gobject vote-many objid funding yes

And let me know if successful and also, then try voting on the one you tried earlier and paste the vote string so I can reproduce?

Note that we have not passed the mandatory height yet, but thats another topic (partially related though).

Yeah, we removed the proposal list from pool.biblepay in favor of the decentralized one in the qt wallet, now you can click on the left pane:  Proposals to see them, and you can right click on one to vote on them.

Bhavani is working on the Expense Summary page for those, but the project has been delayed due to family sickness.

[bible_pay]

If you want to be part of this intelligent conversation you have to be honest Sun.

Okay, you're right. We added many kids very quickly and pay out per child crashed. Fair enough. The economics is right. I'll shore up the difference and use up whatever BBP I have in my wallet. I rather go to 0 and support the orphans as long as I can.

64 CameroonONE children @ $40 = $2,560
21 Kairos kids @ $25 = $525

At current prices, $3085 % 0.00012840 BBP/USD requires 24M BBP.

Is CameroonONE not selling their BBP since Oct 26, 2019? They have a balance of almost 30M BBP.

Should they be selling their BBP on the market every month?

https://chainz.cryptoid.info/bbp/address.dws?BHRiFZYUpHj2r3gxw7pHyvByTUk1dGb8vz.htm
https://chainz.cryptoid.info/bbp/address.dws?B4rwnBcrcr8pqHFFz9oXRcmXEy8g1bZjTV.htm

Thanks for meeting me halfway Sun, and I apologize for being rough around the edges sometimes.

The constant sell pressure is bad.  On one hand, we wanted new charitable people from the outside (like Donald Trump etc) to sponsor orphans with their credit card through paypal.  Then we give them Biblepay, and that keeps the sell pressure off.

But of course with reality kicking in, and the ease of using the poom payments feature, in reality we pay every month with BBP (partially to make BBP a useful currency).

So yes its a conundrum and there really is no easy answer, short of mass adoption and appealing to those who already have a budget to pay for the orphan via Fiat...

Let me check into the increasing balance, thanks for raising the concern.

[jaapgvk]

I've upgraded my sanctuaries to the latest wallet version (1.4.8.4.) and cleaned them as per Togo's guide. Everything seems to be working fine, but I can't seem to vote.

Code:

Voting failed! Failed to vote 0 time(s). (Check that sanctuaries are DIP3? Also you must wait 3 minutes in-between re-votes due to network rules.)

They are in the DIP3 list and I've been getting rewards consistently. Both controller wallet and sanctuary wallets are on the same chain, and they are not on a fork as far as I can tell...

Can you please post the voting command including the id you are using, as I voted manually for Togos proposal and it worked but I did it from the rpc.

I tried to vote using the GUI. I can't remember the command to pull all the Proposal ID's, and I don't know if I can copy them from the GUI proposal tab   So I can't try it from the rpc for now. How can I find a list of all the current Proposal ID's that I can copy/paste so I can try it from the rpc? There used to be an overview of all the proposals on pool.biblepay.org right?

Ok yes cause I would like to try to reproduce with one that actually throws the gov exception error, so one way, is to type:
gobject list all proposals

Could you try voting on the woocommerce one?  98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7

gobject vote-many objid funding yes

And let me know if successful and also, then try voting on the one you tried earlier and paste the vote string so I can reproduce?

Note that we have not passed the mandatory height yet, but thats another topic (partially related though).

Yes, it's working fine manually from the rpc

Code:

17:46:33

gobject vote-many 98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7 funding yes


17:46:33

{
  "overall": "Voted successfully X time(s) and failed 0 time(s).",

From the GUI I tried voting for all the proposals that are currently in the 'Proposals' list, and they all got the same error I mentioned before.

[bible_pay]

If you want to be part of this intelligent conversation you have to be honest Sun.

Okay, you're right. We added many kids very quickly and pay out per child crashed. Fair enough. The economics is right. I'll shore up the difference and use up whatever BBP I have in my wallet. I rather go to 0 and support the orphans as long as I can.

64 CameroonONE children @ $40 = $2,560
21 Kairos kids @ $25 = $525

At current prices, $3085 % 0.00012840 BBP/USD requires 24M BBP.

Is CameroonONE not selling their BBP since Oct 26, 2019? They have a balance of almost 30M BBP.

Should they be selling their BBP on the market every month?

https://chainz.cryptoid.info/bbp/address.dws?BHRiFZYUpHj2r3gxw7pHyvByTUk1dGb8vz.htm
https://chainz.cryptoid.info/bbp/address.dws?B4rwnBcrcr8pqHFFz9oXRcmXEy8g1bZjTV.htm

Thanks for meeting me halfway Sun, and I apologize for being rough around the edges sometimes.

The constant sell pressure is bad.  On one hand, we wanted new charitable people from the outside (like Donald Trump etc) to sponsor orphans with their credit card through paypal.  Then we give them Biblepay, and that keeps the sell pressure off.

But of course with reality kicking in, and the ease of using the poom payments feature, in reality we pay every month with BBP (partially to make BBP a useful currency).

So yes its a conundrum and there really is no easy answer, short of mass adoption and appealing to those who already have a budget to pay for the orphan via Fiat...

Let me check into the increasing balance, thanks for raising the concern.

Sun, I looked at those two balances and they appear to be close to zero.  I see they have sold all their holdings at cameroon one.

[bible_pay]

I've upgraded my sanctuaries to the latest wallet version (1.4.8.4.) and cleaned them as per Togo's guide. Everything seems to be working fine, but I can't seem to vote.

Code:

Voting failed! Failed to vote 0 time(s). (Check that sanctuaries are DIP3? Also you must wait 3 minutes in-between re-votes due to network rules.)

They are in the DIP3 list and I've been getting rewards consistently. Both controller wallet and sanctuary wallets are on the same chain, and they are not on a fork as far as I can tell...

Can you please post the voting command including the id you are using, as I voted manually for Togos proposal and it worked but I did it from the rpc.

I tried to vote using the GUI. I can't remember the command to pull all the Proposal ID's, and I don't know if I can copy them from the GUI proposal tab   So I can't try it from the rpc for now. How can I find a list of all the current Proposal ID's that I can copy/paste so I can try it from the rpc? There used to be an overview of all the proposals on pool.biblepay.org right?

Ok yes cause I would like to try to reproduce with one that actually throws the gov exception error, so one way, is to type:
gobject list all proposals

Could you try voting on the woocommerce one?  98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7

gobject vote-many objid funding yes

And let me know if successful and also, then try voting on the one you tried earlier and paste the vote string so I can reproduce?

Note that we have not passed the mandatory height yet, but thats another topic (partially related though).

Yes, it's working fine manually from the rpc

Code:

17:46:33

gobject vote-many 98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7 funding yes


17:46:33

{
  "overall": "Voted successfully X time(s) and failed 0 time(s).",

From the GUI I tried voting for all the proposals that are currently in the 'Proposals' list, and they all got the same error I mentioned before.

I think we are OK then, the reason you cant vote now is we are past the 'end epoch period' for the monthly gov proposal block (166050).  (I confirm it is actually too late to vote to change the outcome of this monthly trigger).  Also there are a couple changes coming - at height 166075, we switch over to pure dip3 DM mode. 

So lets do this, please wait til next months proposals start kicking in then lets vote for one as early as possible and the error should go away.  (We tested that in testnet).

I do confirm I receive the same error as you in my GUI so yes we are on the same page.

[sunk818]

ORBIS ako funguje to sponzorstvo deti?  da sa to aj dodatocne spustit?

@sunk  any idea how working sponsoring of children? thx

You want to sponsor child? There are many steps, but if you are interested, I can chat with you one-on-one and give you the steps.

I wrote instructions, but they are wrong after we upgraded to 1.4.8.4, so I have to re-write the instructions and re-do the screenshots:

https://whitewalr.us/2019/biblepay-cameroonone-partnership.html
https://whitewalr.us/2019/whats-new-in-biblepay-1449.html#exec_paycameroon

Remember, it costs you 50k BBP to authorize one sponsorship, then you pay for one month every month on the 1st.
Either you $40 USD CameroonONE or $25 USD Kairos.
Currently, you will get back about 33% to 50% back in BBP.

[jaapgvk]

I've upgraded my sanctuaries to the latest wallet version (1.4.8.4.) and cleaned them as per Togo's guide. Everything seems to be working fine, but I can't seem to vote.

Code:

Voting failed! Failed to vote 0 time(s). (Check that sanctuaries are DIP3? Also you must wait 3 minutes in-between re-votes due to network rules.)

They are in the DIP3 list and I've been getting rewards consistently. Both controller wallet and sanctuary wallets are on the same chain, and they are not on a fork as far as I can tell...

Can you please post the voting command including the id you are using, as I voted manually for Togos proposal and it worked but I did it from the rpc.

I tried to vote using the GUI. I can't remember the command to pull all the Proposal ID's, and I don't know if I can copy them from the GUI proposal tab   So I can't try it from the rpc for now. How can I find a list of all the current Proposal ID's that I can copy/paste so I can try it from the rpc? There used to be an overview of all the proposals on pool.biblepay.org right?

Ok yes cause I would like to try to reproduce with one that actually throws the gov exception error, so one way, is to type:
gobject list all proposals

Could you try voting on the woocommerce one?  98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7

gobject vote-many objid funding yes

And let me know if successful and also, then try voting on the one you tried earlier and paste the vote string so I can reproduce?

Note that we have not passed the mandatory height yet, but thats another topic (partially related though).

Yes, it's working fine manually from the rpc

Code:

17:46:33

gobject vote-many 98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7 funding yes


17:46:33

{
  "overall": "Voted successfully X time(s) and failed 0 time(s).",

From the GUI I tried voting for all the proposals that are currently in the 'Proposals' list, and they all got the same error I mentioned before.

I think we are OK then, the reason you cant vote now is we are past the 'end epoch period' for the monthly gov proposal block (166050).  (I confirm it is actually too late to vote to change the outcome of this monthly trigger).  Also there are a couple changes coming - at height 166075, we switch over to pure dip3 DM mode. 

So lets do this, please wait til next months proposals start kicking in then lets vote for one as early as possible and the error should go away.  (We tested that in testnet).

I do confirm I receive the same error as you in my GUI so yes we are on the same page.

Okay, good to know that it's working as intended. I've actually been trying to vote since a couple of days ago (don't know the exact date, sorry). So I just have to be more aware of the deadline!

[bible_pay]

I've upgraded my sanctuaries to the latest wallet version (1.4.8.4.) and cleaned them as per Togo's guide. Everything seems to be working fine, but I can't seem to vote.

Code:

Voting failed! Failed to vote 0 time(s). (Check that sanctuaries are DIP3? Also you must wait 3 minutes in-between re-votes due to network rules.)

They are in the DIP3 list and I've been getting rewards consistently. Both controller wallet and sanctuary wallets are on the same chain, and they are not on a fork as far as I can tell...

Can you please post the voting command including the id you are using, as I voted manually for Togos proposal and it worked but I did it from the rpc.

I tried to vote using the GUI. I can't remember the command to pull all the Proposal ID's, and I don't know if I can copy them from the GUI proposal tab   So I can't try it from the rpc for now. How can I find a list of all the current Proposal ID's that I can copy/paste so I can try it from the rpc? There used to be an overview of all the proposals on pool.biblepay.org right?

Ok yes cause I would like to try to reproduce with one that actually throws the gov exception error, so one way, is to type:
gobject list all proposals

Could you try voting on the woocommerce one?  98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7

gobject vote-many objid funding yes

And let me know if successful and also, then try voting on the one you tried earlier and paste the vote string so I can reproduce?

Note that we have not passed the mandatory height yet, but thats another topic (partially related though).

Yes, it's working fine manually from the rpc

Code:

17:46:33

gobject vote-many 98e09d657fb771f1559ab046af76d295ebde16f563d35ff9bc95ff738ae725f7 funding yes


17:46:33

{
  "overall": "Voted successfully X time(s) and failed 0 time(s).",

From the GUI I tried voting for all the proposals that are currently in the 'Proposals' list, and they all got the same error I mentioned before.

I think we are OK then, the reason you cant vote now is we are past the 'end epoch period' for the monthly gov proposal block (166050).  (I confirm it is actually too late to vote to change the outcome of this monthly trigger).  Also there are a couple changes coming - at height 166075, we switch over to pure dip3 DM mode. 

So lets do this, please wait til next months proposals start kicking in then lets vote for one as early as possible and the error should go away.  (We tested that in testnet).

I do confirm I receive the same error as you in my GUI so yes we are on the same page.

Okay, good to know that it's working as intended. I've actually been trying to vote since a couple of days ago (don't know the exact date, sorry). So I just have to be more aware of the deadline!

The deadline was originally 615 blocks prior, but we are changing it to 7% (425) for the next leisure release to make things easier.

[bible_pay]

** Pool.biblepay.org is being retired **

I'm going to disable pool.biblepay.org temporarily in a few minutes.  Please if anyone notices anything strange or missing please let us know.

To my knowledge we have replaced it with nomp.biblepay.org and the other pools for mining, the san documents were moved to DSQL, web.biblepay.org has the orphan list, and the faucet will be recreated soon at web.biblepay.org (and we have other faucets).

[sunk818]

The deadline was originally 615 blocks prior, but we are changing it to 7% (425) for the next leisure release to make things easier.

Simple text on the Proposals page stating when the next monthly superblock is (like you do for Leaderboard) and vote closing block height will likely help voters.

[Sakic]

Hi,
2 days was everything working for me, but now I checked and my RAC is totally wrong, and also my researcher nickname is old.
My nickname is Sakic at WCG. Why? Exec associate true doesnt help, nickname is still old.

18:52:09

exec rac

18:52:09

{
  "Command": "rac",
  "CPK": "B4hsUDPZUfrku9Aa9PHzDNf4KBh33zCwhA",
  "wcg_teamid": 35006,
  "next_podc_gsc_transmission": 165947,
  "team_name": "Biblepay",
  "researcher_nickname": "Byteball_72ec2753",
  "total_wcg_boinc_credit": 57401851.94,
  "total_wcg_points": 401812963.58,
  "external_purse_total_coin_age": 4540994.670694445,
  "coin_age_percent_required": 0,
  "coin_age_required": 0,
  "wcg_id": 1065623,
  "rac": 0.088533
}

[sunk818]

Sun, I looked at those two balances and they appear to be close to zero.  I see they have sold all their holdings at cameroon one.

The funds were moved to different address. Something about consolidating wallets and IT. The final destination is here:

https://chainz.cryptoid.info/bbp/address.dws?BF6qmwBMmnmb4FbSmRGTeWQL1m3rwh5n7b.htm

[Rabinovitch]

So I have mined about 1 000 000+ coins and sent 2 hrs ago 1 045 000 coins to my mobile BBP wallet address, BDJ2vm86XJPfdo8CG9EDycz43DtLg4iMnP.

Here is this transaction in the source wallet:



But I can't see these coins neither in mobile wallet, nor in blockexplorer. What's going on?

Also, it looks that Android wallet can't find a peer to connect in auto mode.

[sunk818]

I think I know what is happening (as I got to reproduce it once).  Fortunately it appears this is minor (and not a problem with PODC 2.0) .  Please try rebooting and tell me if it is fixed?

I believe we make a call every 50 blocks or so and may possibly reset a vector; but I will check that in more detail after you confirm a reboot fixes it.
Note that it does auto recover 4 hours later; but it is a nuisance for the display.

If I quit the wallet, wait a few minutes, then restart... the leaderboard is displayed correctly.

[cuarc001]

Thanks Togo. Giving that a try now.

Looking at our 4 dns servers, I see the problem, apparently when we switched to dynamic ports, we no longer listen on 40,000 by default in these core nodes.

I just updated all 4 to use the 40,000 default ports.  Please try now.

Also please ensure your system time is correct.

Nothing changed over night. Just restarted the client but nothing yet. I will check back when the family is done with opening gifts.

This can be fixed in minutes...
We just need you to confirm that your system time and timezone is correct, and post your IP, and then I can check the DNS1 log and unban you.
Or you can add an addnode like they suggested.

DNS1-4 is working.

I actually already posted in previous posts that the time/date were correct. (yes I manually sync'd it to verify) I have also posted adding the nodes as both Togo and Sunk suggested. So, I guess all that is left is my IP address. Currently it is 107.77.210.51

Edit: I want to say it was Sunk that posted about this site earlier, but they have a faucet with BBP that new users could utilize for setting up PoDC. https://freefaucet.io/login/register.php?r=cl3dkde3mhcz2yj It is a small amount each time but it is something to get started.

[bible_pay]

So I have mined about 1 000 000+ coins and sent 2 hrs ago 1 045 000 coins to my mobile BBP wallet address, BDJ2vm86XJPfdo8CG9EDycz43DtLg4iMnP.

Here is this transaction in the source wallet:



But I can't see these coins neither in mobile wallet, nor in blockexplorer. What's going on?

Also, it looks that Android wallet can't find a peer to connect in auto mode.

MIP mentioned to me via email that the mobile wallet needs to be updated to 70750, which was just released yesterday at 10am.

Please upgrade and let us know if it syncs to the top height?

[bible_pay]

Hi,
2 days was everything working for me, but now I checked and my RAC is totally wrong, and also my researcher nickname is old.
My nickname is Sakic at WCG. Why? Exec associate true doesnt help, nickname is still old.

18:52:09

exec rac

18:52:09

{
  "Command": "rac",
  "CPK": "B4hsUDPZUfrku9Aa9PHzDNf4KBh33zCwhA",
  "wcg_teamid": 35006,
  "next_podc_gsc_transmission": 165947,
  "team_name": "Biblepay",
  "researcher_nickname": "Byteball_72ec2753",
  "total_wcg_boinc_credit": 57401851.94,
  "total_wcg_points": 401812963.58,
  "external_purse_total_coin_age": 4540994.670694445,
  "coin_age_percent_required": 0,
  "coin_age_required": 0,
  "wcg_id": 1065623,
  "rac": 0.088533
}

1) We pull the researcher nickname from WCG (Byteball_72ec), but we pull the nickname on the leaderboard from your CPK.
2) Your rac looks correct:

exec rac 982538340112287ed60723499adfeb4b

- Looking at the boinc export file for cpid 982*, it really does have a .08 rac.  Do you possibly have the wrong cpid linked with biblepay?

[Sakic]

My RAC is 23 000, cpid 982538340112287ed60723499adfeb4b is ok, WCG nickname is Sakic.
https://www.boincstats.com/stats/15/user/detail/1065623

something must be wrong, because nickname Byteball_72ec2753 is my old nickname I used a long time ago with PODC 1.0.
As I said, it was everything corect 2 days ago when I set up PODC 2. I already got reward for my RAC 22000 that time.
It looks like boinc export file picks old data.

[bible_pay]

My RAC is 23 000, cpid 982538340112287ed60723499adfeb4b is ok, WCG nickname is Sakic.
https://www.boincstats.com/stats/15/user/detail/1065623

something must be wrong, because nickname Byteball_72ec2753 is my old nickname I used a long time ago with PODC 1.0.
As I said, it was everything corect 2 days ago when I set up PODC 2. I already got reward for my RAC 22000 that time.
It looks like boinc export file picks old data.

Yes I see the 23k you have on that link!  Wow thats high.

Let me look into this.

[bible_pay]

My RAC is 23 000, cpid 982538340112287ed60723499adfeb4b is ok, WCG nickname is Sakic.
https://www.boincstats.com/stats/15/user/detail/1065623

something must be wrong, because nickname Byteball_72ec2753 is my old nickname I used a long time ago with PODC 1.0.
As I said, it was everything corect 2 days ago when I set up PODC 2. I already got reward for my RAC 22000 that time.
It looks like boinc export file picks old data.

Wait, before I look I think I remember the problem.

In your WCG account, can you please navigate to Data Sharing, and verify the radio button is enabled for Export Data = OK?
I think due to GDPR regs, this is the process that 'suspends' your export.

Please let me know once you change that, and if you had to change it, so I can do some tests.

EDIT:  Its in settings :  "Step 3", "Click Settings | Data Sharing.  Ensure the 'Display my Data' radio button is selected.  Click Save.