[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[RivAngE]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

[Newton90]

what bminer fee when mining aeternity?

[BogdanCo]

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

[Grim]

This is an important point to note as Cuckatoo31 requires 14GB of GPU memory to accurately solve a graph cycle.
Nvidia GPU’s with "only" 11GB use a memory overflow optimization to solve Cuckatoo31 graphs, but that reduces actual mining performance by 30%.

[r0ver2]

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

Same here, works fine on 2080Ti - but not my 1080Tis

[provenceday]

getting 2.12 GPS on 2080Ti card.


but a lot of rejected shares.

and miner is not very Stable too.

[luckydoky]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

[provenceday]

very high rejected rate on 2080Ti, like 40% been rejected?

[provenceday]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

on windows?

[badfad]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

Same issue here.

[provenceday]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

Same issue here.

Linux works here, but with pretty high rejected shares, like 30%-40% shares been rejected.

[luckydoky]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

on windows?

Yes windows (10), might be why.

[r0ver2]

Works good on linux with my 2080Ti

[INFO] [2019-02-09T17:28:49 01:00] [GPU 0] Speed: 2.15 G/s Fidelity 0.976 Temp: 1C Fan: 1% Power: 1W 2.15 G/J
[INFO] [2019-02-09T17:28:49 01:00] Total 2.15 G/s Accepted shares 283 Rejected shares 7

With 1080Ti I get 35-50% rejected so basically gets 0.6-0.8 on pool with 1.2-1.3 in miner. Would love to get it to work, as that would rock.

my 2080Ti are alone, with better cpu and more ram, while my 1080Tis are rigs (1x6 gpu and 1x12 gpu, same happens with both) on celeron and 8 gb rams - so that may be something about the problem

[dragonmike]

What pool(s) are you getting rejected shares on?

[r0ver2]

What pool(s) are you getting rejected shares on?

I am using f2pool, and works fine with my 2080Ti, but not with the 1080Ti. Both same pool, some location - so dont think its a pool issue

[provenceday]

Works good on linux with my 2080Ti

[INFO] [2019-02-09T17:28:49 01:00] [GPU 0] Speed: 2.15 G/s Fidelity 0.976 Temp: 1C Fan: 1% Power: 1W 2.15 G/J
[INFO] [2019-02-09T17:28:49 01:00] Total 2.15 G/s Accepted shares 283 Rejected shares 7

With 1080Ti I get 35-50% rejected so basically gets 0.6-0.8 on pool with 1.2-1.3 in miner. Would love to get it to work, as that would rock.

my 2080Ti are alone, with better cpu and more ram, while my 1080Tis are rigs (1x6 gpu and 1x12 gpu, same happens with both) on celeron and 8 gb rams - so that may be something about the problem

which Linux Version you are using?

[provenceday]

Works good on linux with my 2080Ti

[INFO] [2019-02-09T17:28:49 01:00] [GPU 0] Speed: 2.15 G/s Fidelity 0.976 Temp: 1C Fan: 1% Power: 1W 2.15 G/J
[INFO] [2019-02-09T17:28:49 01:00] Total 2.15 G/s Accepted shares 283 Rejected shares 7

With 1080Ti I get 35-50% rejected so basically gets 0.6-0.8 on pool with 1.2-1.3 in miner. Would love to get it to work, as that would rock.

my 2080Ti are alone, with better cpu and more ram, while my 1080Tis are rigs (1x6 gpu and 1x12 gpu, same happens with both) on celeron and 8 gb rams - so that may be something about the problem

and what command line and parameters you are using? thanks!

[r0ver2]

Works good on linux with my 2080Ti

[INFO] [2019-02-09T17:28:49 01:00] [GPU 0] Speed: 2.15 G/s Fidelity 0.976 Temp: 1C Fan: 1% Power: 1W 2.15 G/J
[INFO] [2019-02-09T17:28:49 01:00] Total 2.15 G/s Accepted shares 283 Rejected shares 7

With 1080Ti I get 35-50% rejected so basically gets 0.6-0.8 on pool with 1.2-1.3 in miner. Would love to get it to work, as that would rock.

my 2080Ti are alone, with better cpu and more ram, while my 1080Tis are rigs (1x6 gpu and 1x12 gpu, same happens with both) on celeron and 8 gb rams - so that may be something about the problem

which Linux Version you are using?

I am using simplemining os

-uri cuckatoo31://username.$rigName:foo@grin31.f2pool.com:13654 -api 127.0.0.1:1880

[TERA Pool]

Same her :
[INFO] [2019-02-09T20:38:54 01:00] [GPU 2] Speed: 1.32 G/s Fidelity 0.842 Temp: 49C Fan: 80% Power: 240W 0.01 G/J
[INFO] [2019-02-09T20:38:54 01:00] [GPU 3] Speed: 1.33 G/s Fidelity 0.880 Temp: 44C Fan: 80% Power: 224W 0.01 G/J
[INFO] [2019-02-09T20:38:54 01:00] [GPU 4] Speed: 1.32 G/s Fidelity 1.137 Temp: 51C Fan: 80% Power: 227W 0.01 G/J
[INFO] [2019-02-09T20:38:55 01:00] Total 6.63 G/s Accepted shares 39 Rejected shares 26


5x1080ti, on simplemining OS, most of shares are rejected

Edit : Using Bminer 1.4.3
RiG config :
8Go Ram ddr4
Core i3 7100
OC :
Core : 50
Mem : 150
Power :230

[misterkit]

Any update to the bMiner program for BEAM?  On my rig the current version is about 40 sols slower than another mining program out there.