[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s

[teletobi]

Hi
 I got two IceFuries as a refund (thanks). But they are not hashing.
 BFG miner 3.10.  / windows 7 H 32bit - shows :

 ST:2  F:0  NB:1  AS:0  BW:[  1/  0kB/s]  E:0.00  I: 0.00 BTC/hr  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
---------------------------------------------------------------------------
 NFY 0:       |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
 NFY 1:       |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
---------------------------------------------------------------------------
 [2014-01-16 12:54:28] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:28] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:28] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:29] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:29] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:30] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:30] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries

run with this command:
bfgminer.exe -o stratum.mining.eligius.st:3334 -u XXXXX -p XXXX  -S "NFY:all"

and ideas?
Thank you

Or get a RasPi with Minepeon. It's a bit tricky to get them hashing there, but in the end it works.

[1714659179]

1714659179

[1714659179]

1714659179

[1714659179]

1714659179

[1714659179]

1714659179

[Slesh]

Hi
 I got two IceFuries as a refund (thanks). But they are not hashing.
 BFG miner 3.10.  / windows 7 H 32bit - shows :

 ST:2  F:0  NB:1  AS:0  BW:[  1/  0kB/s]  E:0.00  I: 0.00 BTC/hr  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
---------------------------------------------------------------------------
 NFY 0:       |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
 NFY 1:       |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
---------------------------------------------------------------------------
 [2014-01-16 12:54:28] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:28] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:28] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:29] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:29] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:30] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
 [2014-01-16 12:54:30] NFY 1: bitfury_init_oldbuf: Giving up after 4 tries

run with this command:
bfgminer.exe -o stratum.mining.eligius.st:3334 -u XXXXX -p XXXX  -S "NFY:all"

and ideas?
Thank you

Or get a RasPi with Minepeon. It's a bit tricky to get them hashing there, but in the end it works.

Thanks, but I would like to get them working under Win7 (for one of my customers - I have a few Antminers S1 and none USB.). Are they working with USB 2 or USB 3? I'v tried more than 5 different USB Hubs and everytime the same errors. Can someone write here comman line for them in CGminer? thank you.

[teletobi]

Hmm, I don't know the Windows Tricks. But as far as I know they need hidapi. And cgminer does not support hidapi.

What about bitminter?

I heard several times of USB Units having trouble with USB3 Hubs, so I'd prefer the USB2 Hubs. Good Luck.

[rgr_rgr]

Nanofury works with actual version of cgminer (3.10). No need for hidapi for cgminer on linux.

I have used Nanofury on USB 2.0 hubs as well on USB 3.0 port. Every active hub should be able to run at least one of them.

For command line I just use "cgminer" - no special options.

[teletobi]

One of my replacement icefurys is not working properly. After about 10 Minutes to 4 hours it stops hashing.

Can I return it for replacement?