The Chili – 30+GH/s BFL based Bitcoin Miner Assembly

[nexus99]

what percent of HW you are getting? I have 20units around 5%-10%
1 unit at 15%. and I have one unit wont boot? 1-4led is constantly on.

If I am doing my math correctly 1 is about 4% and another around 6%.

[xselam1988]

What is your average daily BTC earning for a single Chili right now?

7*24H=100G/0.09-0.08btc you can do math

[nexus99]

What is your average daily BTC earning for a single Chili right now?

7*24H=100G/0.09-0.08btc you can do math

So about .03BTC/unit/day. Thanks!

[nexus99]

Does this look wrong to you guys?

[Mudbankkeith]

Does this look wrong to you guys?

BAL 0 looks ok

BAL 1 looks slow with a lot of errors.

[xselam1988]

what percent of HW you are getting? I have 20units around 5%-10%
1 unit at 15%. and I have one unit wont boot? 1-4led is constantly on.

If I am doing my math correctly 1 is about 4% and another around 6%.

just use bfgminer more stable, faster, and it will do all the math for you.

[jelin1984]

Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board

[MrTeal]

Does this look wrong to you guys?

Did it just start doing that, or has it always had that kind of HW error rate?
Looking at it, the WU rate seems to be normal, so it's hashing and submitting shares at a normal rate. It's just returning twice as many shares to cgminer as it should be, with half of them being invalid. I've heard of one other unit with this behavior, but I've never seen it on any unit I've had. If I had to speculate, I would say one of the engines on an ASIC might constantly be sending errors.

[nexus99]

Here are the units running under the new version of CGminer as a comparison.

[MrTeal]

Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board

[MrTeal]

Here are the units running under the new version of CGminer as a comparison.

Oh, that makes sense. I didn't notice that it was an old version of cgminer that wasn't reporting diff1 shares. Yes, that appears normal. It's not the same as the one oddball unit.

[Drug5bitz]

Is this still for sale? I read throught the first couple pages but got blinded by the wall of text.

If so I don't have any chips to supply. I waiting on my jalapeno's to ship right now.

Let me know either here or a PM.

[jelin1984]

thanks a lot mr teal

[i3luefire]

what percent of HW you are getting? I have 20units around 5%-10%
1 unit at 15%. and I have one unit wont boot? 1-4led is constantly on.

i have 13 units and they are all below 10% around half are below 5% hw errors

[asjfdlksfd]

EDIT 2: fixed!!! it was a power supply issue. the one failing and the other 2 that failed were all top performers and were causing the power to exceed the power supply's limits. i swapped some units around to get better power balance and now i am hitting 440gh/s on the group of 13.

What was the exact changes you did? Photo?

Cheers...

[Spotswood]

Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board

+1 

I wish every ASIC board manufacturer would publish this information (it would make my job a lot easier).

[i3luefire]

EDIT 2: fixed!!! it was a power supply issue. the one failing and the other 2 that failed were all top performers and were causing the power to exceed the power supply's limits. i swapped some units around to get better power balance and now i am hitting 440gh/s on the group of 13.

What was the exact changes you did? Photo?

Cheers...

i simply figured out that the 3 miners that i was having problems with when ran individually were high GH/s and high wattage miners and they were all 3 sharing the same 650w PSU . then swapped one of them out for a low performer which uses less power and all was fine.

[uski]

Hi there !

Mounting a Chili inside a KnCminer case :
http://forum.kncminer.com/forum/main-category/hardware/18244-hack-knc-bfl-bastard-miner
(and using the KnCminer control circuit to also control the Chili)


uski

[nexus99]

What is your average daily BTC earning for a single Chili right now?

7*24H=100G/0.09-0.08btc you can do math

So about .03BTC/unit/day. Thanks!

After tooling around with cooling a few days I have my 2 miners putting out approximately 72 GH/S combined. That is netting .066 BTC/day on BTCGUild. My goal is .2 BTC/day... so I need another 160 GH/S or so... I have 65 GH/S on the way... so I need 100GH/S.

Do you guys have a suggestion of good hardware for this? Chilis are gone... so time to look for something else.

[Swimmer63]

Blades are down to .36 BTC I think. Get 10.
Or wait for the cube in next week or so. 3 BTC will get 3 cubes. You'll get 114 GH/s