[ANN] Technobit HEX16B(Bitfury based) 16 chip board design

[Zich]

What does it mean failure disabling? Is this indicating a hardware issue?  The miner is plugged directly in to the TP. Power by molex off a PC

I got a second miner I not opened, maybe I should try that one

Sidenote:Thank you Zich for posting on my behalf yesterday

No problem dude 

Did the fan on? If not then no power to your boards.

[azazman]

Hey all

my Fault, The molex thing i was using came from the case :/ and when I built this PC I never wired in the case power.

We are now hashing on both boards

 HEXb 0: 540  840/ 840mV | OFF   / 0.000h/s | A:  0 R:  0 HW:0/0.00% WU:  0.0/m
 HEXb 1: 540  840/ 840mV | OFF   / 0.000h/s | A:  0 R:  0 HW:0/0.00% WU:  0.0/m
 HEXb 2: 540  840/ 847mV | 32.87G/27.24Gh/s | A:166 R: 64 HW:0/0.00% WU:387.2/m
 HEXb 3: 540  840/ 846mV | 42.42G/35.71Gh/s | A:228 R:104 HW:0/0.00% WU:503.9/m

Every time I start cgminer it does the above, does nto seem to be a problem but odd? Will let it settle for a while.

I tried that save and apply, same thing. I will go through the settings again. Something keeps stopping the cgminer proceess after about 2 minutes when i start it manually. Guessing there is an inbuilt check going on.

Update:: a few odd things with the TP link. firstly it is dissconnecting the USB every 30 seconds?

  105.520000] usb 1-1: USB disconnect, device number 6
[  105.860000] usb 1-1: new full-speed USB device number 7 using ehci-platform
[  125.980000] usb 1-1: USB disconnect, device number 7
[  126.310000] usb 1-1: new full-speed USB device number 8 using ehci-platform

And i have configured the cgminer settings in teh webpage to use hexb Yet it keeps trying to start it with --hexminerc-voltage instead of --hexminerb-voltage

Sat Dec 14 15:35:56 GMT 2013: cgminer exited status (1)
Sat Dec 14 15:35:56 GMT 2013: Sleeping for 10...
Sat Dec 14 15:36:06 GMT 2013: Starting cgminer
 [2013-12-14 15:36:06] /usr/bin/cgminer: --hexminerc-voltage: No values passed to hexminerc-voltage


------------- Victory!! ----------------

The reason why CGminer was not loading is that it expected teh default values of all a/b/c hex boards to be entered. I only entered HexB. I ended up changing /usr/bin/miner.sh and changing the param varaiable to only pass the Boptions over. win Win or if anyone else has the problem, just enter teh default values for all boards.

THANK YOU ALL

[cbrboot]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

[marto74]

Sorry too busy to answer each one of you
From today there is one member of the team dedicated to go trough customer support, hope it'll make things better.

In the product page it is written the shipment month.
@ the moment we are selling January shipment.
You can order 10 or 20.
We are not answering if you ask us for earlier delivery as far we have already late orders to finish.
All December orders will be shipped until end of December.

All orders are accepted only trough website.
We ship orders with transport cost paid.
If you ordered with packing only option you'll get an e-mail when your order is ready with address for pick up.
We ship first the orders that have paid transport.
Sending us more and more e-mails as kind for exact delivery date is only filling our inbox

Best Martin

[Melb]

Sorry too busy to answer each one of you
From today there is one member of the team dedicated to go trough customer support, hope it'll make things better.

In the product page it is written the shipment month.
@ the moment we are selling January shipment.
You can order 10 or 20.
We are not answering if you ask us for earlier delivery as far we have already late orders to finish.
All December orders will be shipped until end of December.

All orders are accepted only trough website.
We ship orders with transport cost paid.
If you ordered with packing only option you'll get an e-mail when your order is ready with address for pick up.
We ship first the orders that have paid transport.
Sending us more and more e-mails as kind for exact delivery date is only filling our inbox

Best Martin

Who is this member in Customer Support and how do we contact them?

Why are you persisting promoting January orders when you have not even shipped October and November orders?

You talk of shipping December orders - AGAIN WHAT ABOUT OCTOBER & NOVEMBER ORDERS?

Several questions - so where are the answers...

Melb

[Gator-hex]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

Different clock/voltage values for different chips/boards.

Just leave the values alone, they're pretty optimal already, and select which Hex device you have

A = Hex16A
B = Hex16B
C = Hex16A2

[Gator-hex]

Sorry too busy to answer each one of you
From today there is one member of the team dedicated to go trough customer support, hope it'll make things better.

In the product page it is written the shipment month.
@ the moment we are selling January shipment.
You can order 10 or 20.
We are not answering if you ask us for earlier delivery as far we have already late orders to finish.
All December orders will be shipped until end of December.

All orders are accepted only trough website.
We ship orders with transport cost paid.
If you ordered with packing only option you'll get an e-mail when your order is ready with address for pick up.
We ship first the orders that have paid transport.
Sending us more and more e-mails as kind for exact delivery date is only filling our inbox

Best Martin

Martin, you should remove that shipping option "or bigger orders" if you are unable to combine orders.

I have two orders from December batch 1 pending because it was not combined with the first December batch 1 order shipped.

I'm happy to pay more postage for each order to get them shipped out. It's not just for pick up, include an option to send missing postage, as I wanted it delivered.

Thanks.

[rupy]

Do you have bitfury chips on hand for January delivery?

[Gator-hex]

Do you have bitfury chips on hand for January delivery?

You mean BioInfoBank chips. Are they produced in Poland? https://bioinfobank.com/

[Gator-hex]

Logged in with Putty/SSH, is there a simple monitoring tool that doesn't require restarting cgminer? Like GPUmon is for Litecoin?

[cbrboot]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

Different clock/voltage values for different chips/boards.

Just leave the values alone, they're pretty optimal already, and select which Hex device you have

A = Hex16A
B = Hex16B
C = Hex16A2

How do i know wich device i have?

[Zich]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

Different clock/voltage values for different chips/boards.

Just leave the values alone, they're pretty optimal already, and select which Hex device you have

A = Hex16A
B = Hex16B
C = Hex16A2

How do i know wich device i have?

What do you mean?
You had HEX16B right?

[cbrboot]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

Different clock/voltage values for different chips/boards.

Just leave the values alone, they're pretty optimal already, and select which Hex device you have

A = Hex16A
B = Hex16B
C = Hex16A2

How do i know wich device i have?

What do you mean?
You had HEX16B right?

I see, well in that case i need to change tp-link
Handle USB detect errors as (Default: hexA) to hexB ?

[Gator-hex]

in tp link, what is the hexA, B, C for? All have different values but is there a reason why?

Different clock/voltage values for different chips/boards.

Just leave the values alone, they're pretty optimal already, and select which Hex device you have

A = Hex16A
B = Hex16B
C = Hex16A2

How do i know wich device i have?

What do you mean?
You had HEX16B right?

I see, well in that case i need to change tp-link
Handle USB detect errors as (Default: hexA) to hexB ?

Yes

[uberdag]

VICTORY!!!!

So i got a old dell p4 out of the pile from work brought it home, tried to install linux and it had a bad HD... then pulled HD out of dead dell and put it in new dell.

then by mistake somehow i installed reg ubuntu instead of xubuntu and the desktop threw me... so got correct iso got it installed and all is good...

Hashing at 45 Gh/s not going to touch nothing!!!!!  think i will just sell my 4 usb 333 miners and call it.

thanks again to everyone

[Zich]

VICTORY!!!!

So i got a old dell p4 out of the pile from work brought it home, tried to install linux and it had a bad HD... then pulled HD out of dead dell and put it in new dell.

then by mistake somehow i installed reg ubuntu instead of xubuntu and the desktop threw me... so got correct iso got it installed and all is good...

Hashing at 45 Gh/s not going to touch nothing!!!!!  think i will just sell my 4 usb 333 miners and call it.

thanks again to everyone

Great 

[Morpheus21]

Marto, you are to busy to answer, I understand that;

Guy,
Have you got picture of your HEX16B?
a part of component are not there/modified compare the Hex of Martin,  and i hope to change a part of it but i need more information.
Who is the Max you get with 1 HEX?

MARTO, If you got a little time let me know that please.

Thanks for Help,

[Morpheus21]

Do you have bitfury chips on hand for January delivery?

You mean BioInfoBank chips. Are they produced in Poland? https://bioinfobank.com/

all your ships are turn in the same way?

[Zich]

Do you have bitfury chips on hand for January delivery?

You mean BioInfoBank chips. Are they produced in Poland? https://bioinfobank.com/

all your ships are turn in the same way?

Guys, check this out:

I've noticed all the EU bit fury chips have Bio....... on them but the US ones have ß on them just different packaging marks?

Yeah, I remember asking that question before (but I'm too tired to search for it right now to quote it )

In essence - the ones with the ß symbol were from the first packaging batch, and the ones with the BioInfoBank were from the subsequent packaging. Both chips are from the same silicon dies, so the silicon part in them is identical. I think I someone mentioned that the marking is such because BioInfoBank was the entity that actually paid the bill. Which doesn't really matter for us - as long as the chips work fine I could care less what does it say on the packaging.

[Zich]

For all my friends here, Merry Christmas & Happy New Year 2014.