Gator-hex
|
|
February 11, 2014, 04:50:09 PM |
|
Now I've some questions please. Sorry but I'm a perfect newbie here 1) Probably usb ports are burn by miner but.. miner could be also burn ? How I can test it without burn another pc ? 2) It is normal that from usb cable miner come out 1.33 volts? (measured on pin 1 and pin 4) 3) How can I power miner on same PSU ? 4) I've a rapsberry never used with his small power adapter. Can I try (how? ) to configure it and try? 1) Use a power protected USB hub! 2) Yes, but you can tape out the outer pins (ground and +5v) or cut the wires if it's an issue. It doesn't hurt a TL-MR3020 though. 3) Plug it in to a molex cable, but always use a power protected USB hub, to stop any power getting back up the USB! 4) Off a USB cable plugged into a powered hub. Rasberry Pi does not have a good reputation, so using a TL-MR3020 instead is recommended.
|
|
|
|
bladech
|
|
February 11, 2014, 04:57:34 PM |
|
Thanks! So at the moment, just to do some tests, I can use the same other PSU as before but going thru usb powered hub? Coulb be sufficient at the moment just for test?
|
|
|
|
Gator-hex
|
|
February 11, 2014, 05:05:33 PM Last edit: February 11, 2014, 05:20:21 PM by Gator-hex |
|
Thanks! So at the moment, just to do some tests, I can use the same other PSU as before but going thru usb powered hub? Coulb be sufficient at the moment just for test?
Powered USB2 hub, to power the Pi from a USB cable but also look for Power/voltage/current/overload/surge (could be any word) Protected USB2 ports, to stop any power leaking back up the USB.
|
|
|
|
sinuari
Member
Offline
Activity: 127
Merit: 62
|
|
February 11, 2014, 05:30:53 PM Last edit: February 13, 2014, 08:00:28 PM by sinuari |
|
Marto: Wath is your fucking problem, are you blind, abnormal or simply a thief, give me my money back, order: IKMSANPPV
|
|
|
|
|
seaandy
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 11, 2014, 10:04:02 PM |
|
Hi Martin,
what about my order QNNEYUNAT , you recive my payment of about 2112€ early December and till yet no Delivery,
I want my money refund you scammer , you are stolen my money
I send you my paypal account by PM and of course no Answer - by your fucking company normaly situation
I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata
Give me my money you fucking scammer
|
|
|
|
|
marto74 (OP)
|
|
February 11, 2014, 10:52:55 PM |
|
Hi Martin,
what about my order QNNEYUNAT , you recive my payment of about 2112€ early December and till yet no Delivery,
I want my money refund you scammer , you are stolen my money
I send you my paypal account by PM and of course no Answer - by your fucking company normaly situation
I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata
Give me my money you fucking scammer
1. Please ,behave !!!!! 2. watch your language 3. In order tomake this done send me copy of your ID on the name of the wire transfer sender with paypal address. How hard it is to understand ??
|
|
|
|
seaandy
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 11, 2014, 11:27:08 PM |
|
Hi Martin,
what about my order QNNEYUNAT , you recive my payment of about 2112€ early December and till yet no Delivery,
I want my money refund you scammer , you are stolen my money
I send you my paypal account by PM and of course no Answer - by your fucking company normaly situation
I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata
Give me my money you fucking scammer
1. Please ,behave !!!!! 2. watch your language 3. In order tomake this done send me copy of your ID on the name of the wire transfer sender with paypal address. How hard it is to understand ?? you know my order number and my paypal address - I send you PM with my data but you don't answer my PM
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
February 12, 2014, 02:03:47 AM Last edit: February 12, 2014, 02:18:10 AM by Zich |
|
4) I've a rapsberry never used with his small power adapter. Can I try (how? ) to configure it and try? Thanks to all for your precious support! Since you already own raspi, then it would be a waste to not use it. The following guide is based on raspbian wheezy so please reinstall in case not wheezy 1. sudo aptitude update 2. sudo aptitude upgrade 3. sudo aptitude install libudev-dev libusb-1.0-0-dev libfox-1.6-dev 4. sudo aptitude install autotools-dev autoconf automake 5. sudo aptitude install libtool libncurses-dev yasm 6. sudo aptitude install curl libcurl4-openssl-dev libjansson-dev screen 7. sudo aptitude install pkg-config uthash-dev make git-core
Then download cgminer 3.12.3 1. git clone https://github.com/ckolivas/cgminer.git 2. mv cgminer cgminer-3.12.3 3. cd cgminer-3.12.3 4. git checkout e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f 5. wget https://www.dropbox.com/s/hfx7l4hz5ywgw3x/e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f.patch 6. patch -p1 < e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f.patch 7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8 8. make
Step 5 is patch uploaded to dropbox by myself, so you can use your own that downloaded from technobit download page if you want Make sure there is no error message on each step. No need to install, you can run cgminer from folder. 1. screen 2. sudo ./cgminer --hexminerb-voltage 900 --hexminerb-options 16:540
|
|
|
|
wuzamarine
Sr. Member
Offline
Activity: 264
Merit: 250
derp
|
|
February 12, 2014, 08:19:37 AM |
|
I have some praises to deliver. He deserves some. I have been fucked by BFL and CloudHashing. Couldn't deliver. I have Technobit gear.
All orders placed about the same time.
With the correct amount of power, she works fine. Thank you!
|
|
|
|
wollek
Newbie
Offline
Activity: 34
Merit: 0
|
|
February 12, 2014, 08:57:12 AM |
|
Marto wrote: " 1. Please ,behave !!!!! 2. watch your language 3. In order tomake this done send me copy of your ID on the name of the wire transfer sender with paypal address.
How hard it is to understand ?? "
it's really unbelievable, how ignorant Marto seems to be - answers no mails, no pm's, and in this thread only to red letters.
thats's bitcoin business, yes?... no thanks! lol
|
|
|
|
skymax
Member
Offline
Activity: 63
Merit: 10
|
|
February 12, 2014, 02:16:42 PM |
|
Marto wrote: " 1. Please ,behave !!!!! 2. watch your language 3. In order tomake this done send me copy of your ID on the name of the wire transfer sender with paypal address.
How hard it is to understand ?? "
it's really unbelievable, how ignorant Marto seems to be - answers no mails, no pm's, and in this thread only to red letters.
thats's bitcoin business, yes?... no thanks! lol
no more time....no more crazy words without a serious reply....we must take action ... http://europa.eu/youreurope/citizens/shopping/online-shopping/index_en.htm
|
|
|
|
wuzamarine
Sr. Member
Offline
Activity: 264
Merit: 250
derp
|
|
February 18, 2014, 03:34:55 AM |
|
One of the 3 miners that I ordered, one of the hotplugs fried on it. Black and burnt. How do I initiate an RMA for this device?
Brad
|
|
|
|
dspbuy
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 18, 2014, 07:33:52 AM |
|
Marto WHERE IS MY REFUND for the NOVEMBER order that you never shipped? I have told you my order number at least 2 times already and you just keep ignoring me. I have been waiting since LAST YEAR!. How many more years do I need to wait?
|
|
|
|
dspbuy
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 18, 2014, 07:57:17 AM Last edit: February 18, 2014, 11:45:35 AM by dspbuy |
|
PS: I am compiling a list of actions we (people who have been scammed by TechnoBit) can take. If we all do them they have the potential to shut down TechnoBit. I will publish the list with instructions if Marto doesn't return my money as I requested a long time ago.
UPDATE: Marto actually contacted me via email, but the "negotiation" is still ongoing.
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
February 18, 2014, 12:18:01 PM |
|
One of the 3 miners that I ordered, one of the hotplugs fried on it. Black and burnt. How do I initiate an RMA for this device?
Brad
Would you share some picture?
|
|
|
|
lucazane
Legendary
Offline
Activity: 1198
Merit: 1000
|
|
February 18, 2014, 02:06:13 PM |
|
Hello, I have a problem with my order RWYZDXDOH (1473 Euro) for 3 HEX16b I received 3 hex16c(a2) instead of 3 HEX16b! http://imgur.com/a/mlsEZSince the miners I received cost 3x 249,30€ = 747.9 1473 - 747 = 725.1 € You can put of voucher of 725 € to my account and we will be ok ! (I give you the 0.1 €)
|
|
|
|
marto74 (OP)
|
|
February 18, 2014, 02:09:24 PM |
|
Hello, I have a problem with my order RWYZDXDOH (1473 Euro) for 3 HEX16b I received 3 hex16c(a2) instead of 3 HEX16b! http://imgur.com/a/mlsEZSince the miners I received cost 3x 249,30€ = 747.9 1473 - 747 = 725.1 € You can put of voucher of 725 € to my account and we will be ok ! (I give you the 0.1 €) Sorry for that. Just make your next order with bank wire payment and we'll add a discount to it.
|
|
|
|
lucazane
Legendary
Offline
Activity: 1198
Merit: 1000
|
|
February 18, 2014, 02:34:57 PM |
|
Sorry for that. Just make your next order with bank wire payment and we'll add a discount to it.
I made the order (CSKSTJXME) But I would like to pay the difference (1031-725) 306 € with BTC
|
|
|
|
|