[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency

[xxxgoodgirls]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Yeah double checked also that

[TaoOfSaatoshi]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Oblox, can you look over my guide to see if everything is OK on my end, and this is just user error? I will change any errors you find. I know tens of people have used it so far without issue, but I would like to double check. Please post your answer in the thread.

Cheers,

Tao

[maxpowerzz92]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Yeah double checked also that

Check your file location.  Should be in your datadir directory, which is normally the same folder as the wallet.dat.

[oblox]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Yeah double checked also that

Are you running a cold/remote masternode or hot?

Does the conf file have the masternode key and ip in it?

Are you launching it with that conf file (-conf=PATH TO CONF FILE)? Does the top of the client say masternode, if not, the config isn't loaded properly.

[xxxgoodgirls]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Yeah double checked also that

Are you running a cold/remote masternode or hot?

Does the conf file have the masternode key and ip in it?

Are you launching it with that conf file (-conf=PATH TO CONF FILE)? Does the top of the client say masternode, if not, the config isn't loaded properly.

on a vps
yes
yes

I tried different encoding on notepad with no luck

[TaoOfSaatoshi]

YOUR ONE STOP SHOP FOR DARKCOIN NEWS, OPINION, AND CREATIVITY:


https://www.rebelmouse.com/TaoOfSatoshi/

Now, also located in my sig!

Tao

[oblox]

Hello dear guys, I am trying to set up a masternode but I keep getting this message when I send masternode start password

you must set masternode=1 in the configuration

however I double checked the darkcoin.conf being .conf and not .conf.txt.
Any hint?

You need masternode=1 in the darkcoin.conf file on local...

Yeah double checked also that

Are you running a cold/remote masternode or hot?

Does the conf file have the masternode key and ip in it?

Are you launching it with that conf file (-conf=PATH TO CONF FILE)? Does the top of the client say masternode, if not, the config isn't loaded properly.

on a vps
yes
yes

I tried different encoding on notepad with no luck

The last question is yes to which part?

[xxxgoodgirls]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

[oblox]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Then if the top of the client where it says "Darkcoin - Wallet" does not say the word masternode, your config file is wrong somehow. The masternode=1 setting puts the client into masternode mode.

This is all the local conf file should have:

Code:

rpcuser=Gibberish
rpcpassword=Gibberish
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
addnode=23.23.186.131
masternode=1
masternodeprivkey=MN GENKEY
masternodeaddr=IP ADDRESS TO MN:9999

[Kai Proctor]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Did you try with an other path ? Your darkcoin folder being in C: do you run the wallet as an administrator ? (I'm guessing)

[xxxgoodgirls]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Then if the top of the client where it says "Darkcoin - Wallet" does not say the word masternode, your config file is wrong somehow. The masternode=1 setting puts the client into masternode mode.

Oh it doesn't say masternode.

this is my config

rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
listen=0
server=1
daemon=1
logtimestamps=1
addnode=23.23.186.131
masternode=1
masternodeprivkey=xxx
masternodeaddr=xxx:9999

[raico]

First Ever InstantX Demonstration

https://www.youtube.com/watch?v=zBjUPj-TmFE&feature=youtu.be

Edit: Sorry for terrible audio quality, I need a new mic!

Excellent stuff Evan... I really think this is groundbreaking, within 12 months you've solved two of the biggest problems facing crypto:

1. Anonymous transactions
2. Instant TX for Point of Sale.

No small achievement... So a big thank you from me, it's a privilege being involved with the Dark community and I think we're all witnessing some pretty special stuff going on right here

Walter

Bump~!

[xxxgoodgirls]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Did you try with an other path ? Your darkcoin folder being in C: do you run the wallet as an administrator ? (I'm guessing)

Yeah I've already flagged it to run it as administrator, and multiple .conf paths also. That's weird, ti looks like darkcoin-qt is not seeing the .conf

[oblox]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Did you try with an other path ? Your darkcoin folder being in C: do you run the wallet as an administrator ? (I'm guessing)

Yeah I've already flagged it to run it as administrator, and multiple .conf paths also. That's weird, ti looks like darkcoin-qt is not seeing the .conf

And you are 100% certain your conf file is an actual conf file and not a text file. Once you navigate to where the *.exe is and type the darkcoin-qt.exe -conf=PATH, it uses the specified config file. I have never seen an instance where this wasn't the case. And I have multiple config files for all my masternodes.

[xxxgoodgirls]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Did you try with an other path ? Your darkcoin folder being in C: do you run the wallet as an administrator ? (I'm guessing)

Yeah I've already flagged it to run it as administrator, and multiple .conf paths also. That's weird, ti looks like darkcoin-qt is not seeing the .conf

And you are 100% certain your conf file is an actual conf file and not a text file. Once you navigate to where the *.exe is and type the darkcoin-qt.exe -conf=PATH, it uses the specified config file. I have never seen an instance where this wasn't the case. And I have multiple config files for all my masternodes.

LOLLLLLLLLLLL SORRY EVERYBODY FOR WASTING YOUR TIME

C:\ != c:\

HAPPY MASTERNODING TO ME

[oblox]

The last question is yes to which part?

sry for not being clear. The conf file is 100% correct, and I'm launching the wallet on windows through darkcoin-qt.exe -conf=c:\darkcoin\darkcoin.conf (the path is correct)

Did you try with an other path ? Your darkcoin folder being in C: do you run the wallet as an administrator ? (I'm guessing)

Yeah I've already flagged it to run it as administrator, and multiple .conf paths also. That's weird, ti looks like darkcoin-qt is not seeing the .conf

And you are 100% certain your conf file is an actual conf file and not a text file. Once you navigate to where the *.exe is and type the darkcoin-qt.exe -conf=PATH, it uses the specified config file. I have never seen an instance where this wasn't the case. And I have multiple config files for all my masternodes.

LOLLLLLLLLLLL SORRY EVERYBODY FOR WASTING YOUR TIME

C:\ != c:\

HAPPY MASTERNODING TO ME

lol, no worries. I had no other answers for you at that point because you were doing everything by the book. Glad you figured it out.

[xxxgoodgirls]

have you guys got any useful guide on hardening a masternode/linux server? thank you

[Kai Proctor]

have you guys got any useful guide on hardening a masternode/linux server? thank you

https://darkcointalk.org/forums/guides.66/

https://darkcointalk.org/forums/tips-and-tricks.72/

 

[Fatov]

have you guys got any useful guide on hardening a masternode/linux server? thank you

https://darkcointalk.org/forums/guides.66/

https://darkcointalk.org/forums/tips-and-tricks.72/

 

Nice signature
Is code available?

[Kai Proctor]

Nice signature
Is code available?

What code ?  

If it's my sig :

Code:

For [b]private[/b], [b]fast[/b] and [b]secure[/b] transactions, join the [size=12pt][color=black]r[/color][/size][size=14pt][color=blue]evolution[/color][/size] : [size=15pt][url=https://www.darkcoin.io][b][color=blue]Dark[/color][color=black]coin[/color][/b][/url] | [url=https://www.darkcointalk.org/][b][color=blue]F[/color][color=black]orum[/color][/b][/url][/size]