[ANN] [CHC] Chaincoin - Network Upgrade 16.3 - SegWit Activated

[psystar]

Is there any tip to sync the wallet?
I'm waiting more than 10 hours and not has changed

Same here guys ..Wallet out of sync ..No block found ..No network connected .. 3 yrs 25 weeks behind ... It is not doing anything ..
All other wallets work fine on same computer/connection!

[oldcoinguru]

Is there any tip to sync the wallet?
I'm waiting more than 10 hours and not has changed

Same here guys ..Wallet out of sync ..No block found ..No network connected .. 3 yrs 25 weeks behind ... It is not doing anything ..
All other wallets work fine on same computer/connection!

In your conf file  addnode=104.238.153.140
That's the block explorer with 200 connections.

[ocminer]

As I had some requests, I've modded latest sgminer to work with the c11 algo:

https://github.com/ocminer/sgminer-chaincoin

you can compile with:

Code:

git clone https://github.com/ocminer/sgminer-chaincoin
cd sgminer-chaincoin
git submodule add https://github.com/akheron/jansson.git submodules/jansson
sh autogen.sh
./configure
make

and then run with:

Code:

sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u username.worker -p x -I 21 -g 4 -w 128 --lookup-gap 4 -s 1 --queue 1 -E 15

Need to try your i am getting 10mh each 1060 3gb card with ccminer cuda mod.
But ccminer is 70% more fast than sgminer

I know. I'm no cuda/opencl programmer, I just integrated the old .cl kernel into a recent sgminer version - I didn't optimize anything, sorry !

There are lots of improvements on the kernel possible, from what I see you can even use the old x11-optimizations wolf did some time ago for darkcoin (now dash) - but I don't have time nor the interest migrating the optimizations from the darkcoin to the chaincoin kernel. It's not too hard though, I guess anyone can do it with some trial and error, it's literally just copying wolf's mods into the chaincoin.cl kernel file. Good luck

[cryptogaga]

the way chc recovered could really go to 100

[psystar]

Is there any tip to sync the wallet?
I'm waiting more than 10 hours and not has changed

Same here guys ..Wallet out of sync ..No block found ..No network connected .. 3 yrs 25 weeks behind ... It is not doing anything ..
All other wallets work fine on same computer/connection!

In your conf file  addnode=104.238.153.140
That's the block explorer with 200 connections.

How to do this bro ? Where is the conf file?

[notbatman]

the way chc recovered could really go to 100 150

FTFY

As I had some requests, I've modded latest sgminer to work with the c11 algo:

https://github.com/ocminer/sgminer-chaincoin

you can compile with:

Code:

git clone https://github.com/ocminer/sgminer-chaincoin
cd sgminer-chaincoin
git submodule add https://github.com/akheron/jansson.git submodules/jansson
sh autogen.sh
./configure
make 

and then run with:

Code:

sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u username.worker -p x -I 21 -g 4 -w 128 --lookup-gap 4 -s 1 --queue 1 -E 15

Oh thank God, fucking wine's networking is broken (apt-get binaries) on my amd64 ubuntu and it's a bitch to compile myself. In fact the compiler is still working on it as I type...

edit:
wait... sgminer.exe, .exe? what's going on here?

[notbatman]

[mod note: post merged with the first one]

As I had some requests, I've modded latest sgminer to work with the c11 algo:

https://github.com/ocminer/sgminer-chaincoin

you can compile with:

Code:

git clone https://github.com/ocminer/sgminer-chaincoin
cd sgminer-chaincoin
git submodule add https://github.com/akheron/jansson.git submodules/jansson
sh autogen.sh
./configure
make 

and then run with:

Code:

sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u username.worker -p x -I 21 -g 4 -w 128 --lookup-gap 4 -s 1 --queue 1 -E 15

Oh thank God, fucking wine's networking is broken (apt-get binaries) on my amd64 ubuntu and it's a bitch to compile myself. In fact the compiler is still working on it as I type...

edit:
wait... sgminer.exe, .exe? what's going on here?

[j2ee]

Biggest price drop in a day for any coin? Why did this coin raise so much recently?

The coin was way under valued so a HODL team choose to buy up the supply and then some pump groups go in and pumped and dumped it. Now it is finding it's real price and may push back higher or may go down a bit lower. With the low money supply and the low inflation rate I don't see any reason why it should not push back higher buy only time will tell.

Thx then how do I start mining this chaincoin? I have a computer with 6100 i3 cpu and RX460 display card.

Check out page one or if you want pool mining got to https://chc.suprnova.cc/ and choose "get started" from the help menu

Thanks, I just read it but it doesn't mention how to limit the gpu to be like 70%...how can I do that and what is a good limitation for not burning and damaging the gpu?

I uise MSI Afterburner and limit my cards to 70c

I don't see a temperature limit option in Afterburner....

[phuckit17]

My Financial Advisor told me running a master node is "International money laundering" and I could go to prison. Idk if this is 100% true but thought I would share the info.

[j2ee]

https://chc.suprnova.cc/ is the biggest pool now?

[Jaerin]

Nodes for your chaincoin.conf.  If you can't find the file in the chaincoin wallet go to tools->open configuration file

Everything you need to get synced can be found in this post:
https://bitcointalk.org/index.php?topic=422149.msg20172971#msg20172971

[bokerus]

please upload the blockchain zip

[CryptoBomg]

https://chc.suprnova.cc/ is the biggest pool now?

No, supr not work, yiimp...

[bulleteyedk]

As I had some requests, I've modded latest sgminer to work with the c11 algo:

https://github.com/ocminer/sgminer-chaincoin

you can compile with:

Code:

git clone https://github.com/ocminer/sgminer-chaincoin
cd sgminer-chaincoin
git submodule add https://github.com/akheron/jansson.git submodules/jansson
sh autogen.sh
./configure
make

and then run with:

Code:

sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u username.worker -p x -I 21 -g 4 -w 128 --lookup-gap 4 -s 1 --queue 1 -E 15

Need to try your i am getting 10mh each 1060 3gb card with ccminer cuda mod.
But ccminer is 70% more fast than sgminer

I know. I'm no cuda/opencl programmer, I just integrated the old .cl kernel into a recent sgminer version - I didn't optimize anything, sorry !

There are lots of improvements on the kernel possible, from what I see you can even use the old x11-optimizations wolf did some time ago for darkcoin (now dash) - but I don't have time nor the interest migrating the optimizations from the darkcoin to the chaincoin kernel. It's not too hard though, I guess anyone can do it with some trial and error, it's literally just copying wolf's mods into the chaincoin.cl kernel file. Good luck

Im running sgminer 4.1.0 with 2 AMD cards (rx480 + rx470) and only getting around 11.5 Mh/s in total, if someone succeeds in compiling a newer optimized version of sgminer then be kind to update us in this thread, thanks

Im getting approx. 1 coin pr. day mining, not much but great potential in this coin with the hodl technique and the community behind...

[BitPotus]

wow!

[CryptoBomg]

heh, 1 coin......

[phuckit17]

Well you can't say you weren't warned. GL

[notbatman]

Well you can't say you weren't warned. GL

Go tell it to the DASH thread, LOL. --> https://bitcointalk.org/index.php?topic=421615.0

[Temporel]

Biggest price drop in a day for any coin? Why did this coin raise so much recently?

The coin was way under valued so a HODL team choose to buy up the supply and then some pump groups go in and pumped and dumped it. Now it is finding it's real price and may push back higher or may go down a bit lower. With the low money supply and the low inflation rate I don't see any reason why it should not push back higher buy only time will tell.

Thx then how do I start mining this chaincoin? I have a computer with 6100 i3 cpu and RX460 display card.

Check out page one or if you want pool mining got to https://chc.suprnova.cc/ and choose "get started" from the help menu

Thanks, I just read it but it doesn't mention how to limit the gpu to be like 70%...how can I do that and what is a good limitation for not burning and damaging the gpu?

I uise MSI Afterburner and limit my cards to 70c

I don't see a temperature limit option in Afterburner....

[NetopyrMan]

Nodes for your chaincoin.conf.  If you can't find the file in the chaincoin wallet go to tools->open configuration file

I'll post up a snapshot of the blockchain when I get in sync.  If someone else would like to post one that would save time.

Code:

addnode=208.167.248.188
....

THANKS, its Alive it still will be couple of hours to full sync, but still, THANKS