KC82
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 04, 2014, 02:27:27 PM |
|
I love how every time the profitability slides down to 110% LTC or so and I start to worry, we get 200% - 300% profitability for an hour or two and get back to 130% for the 24 hour period. I need to calm down.
|
|
|
|
pengoau
|
|
March 04, 2014, 02:28:20 PM |
|
Or am I missing something?
Yes, that config was to avoid using fail over (default pool setting) to see if it was the cause of the untracked shares. Is it? btw I'm using what you posted but in reverse e.g the US server is 1 and europe server is 0. I still get that error, might be a problem with the US server? Interesting its more hops and a bit of packet loss to the US server, whereas the EU server is less hops and lower latency from Australia (TPG). Going to switch the servers as per your setup. The reject error might be due to the packet loss/latency to the US server (link or server overloaded). Might be a good idea to disable icmp for the EU server so it don't get a icmp based ddos.
|
|
|
|
Kalroth
Newbie
Offline
Activity: 51
Merit: 0
|
|
March 04, 2014, 02:30:37 PM |
|
btw I'm using what you posted but in reverse e.g the US server is 1 and europe server is 0.
I still get that error, might be a problem with the US server?
Did you set load-balance to true?
|
|
|
|
pengoau
|
|
March 04, 2014, 02:35:39 PM Last edit: March 04, 2014, 02:51:32 PM by pengoau |
|
btw I'm using what you posted but in reverse e.g the US server is 1 and europe server is 0.
I still get that error, might be a problem with the US server?
Did you set load-balance to true? yep, rejects are quite high but its only been a few minutes .. i'll see how it is after 1hr. The untracked error is coming from the US server according to sgminer. Since the reject errors are coming from the USA I've switched back to failover-only and using the EU server as primary. Once the asian server comes online, it should get a lot better. Primary = Asia Secondary = Europe; backup 1 Tertiary = USA; backup 2
|
|
|
|
Terk (OP)
|
|
March 04, 2014, 03:09:05 PM |
|
I just added real-time stats for hashpower by regions at http://www.clevermining.com/hashrate - mostly for my convenience so that I wouldn't need to check it manually in databases every other moment, but you might find it interesting too. It shows last 10-minute hashpower on each server along with rejected ratio on each server.
|
|
|
|
csa1234
Full Member
Offline
Activity: 289
Merit: 100
O2-Protocol.com Carbon Offset DeFi
|
|
March 04, 2014, 03:13:54 PM |
|
Terk any chance of getting a server for South America?
|
O2-Protocol.com Carbon Offset DeFi
|
|
|
Mav2000
Member
Offline
Activity: 84
Merit: 10
|
|
March 04, 2014, 03:31:12 PM |
|
Switched over to the EU pool and now my rejects is zero...thank you, works superb for me now.
|
|
|
|
Kifissia
Member
Offline
Activity: 81
Merit: 10
|
|
March 04, 2014, 03:58:05 PM |
|
For some reason, although last night everything worked great on the EU server, now all my miners disconnect after 2-3 minutes and sometimes reconnect, sometimes they dont.
Weird!
Are you making any changes to the EU server?
|
|
|
|
rolk
Newbie
Offline
Activity: 15
Merit: 0
|
|
March 04, 2014, 04:08:03 PM |
|
Are those Rejected untracked stratum share from pool 0 shares being count as accepts?
|
|
|
|
tagore
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 04, 2014, 04:09:04 PM |
|
Or am I missing something?
Yes, that config was to avoid using fail over (default pool setting) to see if it was the cause of the untracked shares. How can we use the QUOTA on a bat file?
|
|
|
|
hostmaster
|
|
March 04, 2014, 04:10:54 PM |
|
stratum+tcp://eu.clevermining.com:3333 finally, congrats! i weas waiting for it.
|
|
|
|
Patsalos
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 04, 2014, 04:11:25 PM |
|
A big Thank you to Terk .Really nice work on the EU server. Rejects nearly at 0%. I like people who are dedicated to what they are doing, and Terk is one of them. So people, stop whining about a bad day and see the whole picture...
|
|
|
|
Kalroth
Newbie
Offline
Activity: 51
Merit: 0
|
|
March 04, 2014, 04:29:36 PM |
|
How can we use the QUOTA on a bat file?
I imagine you just specify --quota or -U instead of --url or -o. eg. -U 1;stratum+tcp://eu.clevermining.com:3333 instead of -o stratum+tcp://eu.clevermining.com:3333
|
|
|
|
spinkick
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 04, 2014, 04:50:12 PM |
|
Is the realtime hashrate calculator still messed up? I am only showing 65 k/h when im mining 1.2 mhash
|
|
|
|
hashsss
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 04, 2014, 04:52:37 PM |
|
Terk, which link i must use to right mining now i mine to nl.clevermining.com and its working magnificently, but maybe i must use eu.clevermining.com since it was so conceived I joined the NL as I see that all requests to EU redirected to NL
|
|
|
|
Terk (OP)
|
|
March 04, 2014, 05:04:50 PM |
|
Is the realtime hashrate calculator still messed up? I am only showing 65 k/h when im mining 1.2 mhash
It should work fine. There must be something wrong if the difference is so high. Did you try to restart your miners and make sure they haven't switched to some other backup pool?
|
|
|
|
Terk (OP)
|
|
March 04, 2014, 05:08:02 PM |
|
Terk, which link i must use to right mining now i mine to nl.clevermining.com and its working magnificently, but maybe i must use eu.clevermining.com since it was so conceived I joined the NL as I see that all requests to EU redirected to NLBoth addresses are fine, eu is an alias for nl (Netherlands). I just named the server after the country in case there would be more European servers in the future but created an alias that would be easier to remember. You can use whichever you want, there's no difference.
|
|
|
|
spinkick
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 04, 2014, 05:24:52 PM |
|
Is the realtime hashrate calculator still messed up? I am only showing 65 k/h when im mining 1.2 mhash
It should work fine. There must be something wrong if the difference is so high. Did you try to restart your miners and make sure they haven't switched to some other backup pool? I just reset them so we will see. They were reporting fine, though.
|
|
|
|
tagore
Newbie
Offline
Activity: 44
Merit: 0
|
|
March 04, 2014, 05:53:00 PM |
|
How can we use the QUOTA on a bat file?
I imagine you just specify --quota or -U instead of --url or -o. eg. -U 1;stratum+tcp://eu.clevermining.com:3333 instead of -o stratum+tcp://eu.clevermining.com:3333 Thanks so much for your help, it works I could make it work on the bat file even after read many times the cgminer readme, I was making a mistake.
|
|
|
|
pengoau
|
|
March 04, 2014, 05:57:56 PM |
|
Using fail-over only and europe as the primary server, rejects for the last 3hrs are 0.8% and no stales.
|
|
|
|
|