[GPUC] GPU Coin | Mandatory Wallet Update

[bitchallenged]

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126


Do I need to instead put that in the vertminer folder or is there something I am missing?

[lemfuture]

getting lots of hw error.. whats the right parameter for r9 290?

[LuckyLuke]

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

[lemfuture]

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

my intensity is 13, still getting hw

[byteflush]

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126


Do I need to instead put that in the vertminer folder or is there something I am missing?

Nope, but there should be vertminer.conf file in the folder where vertminer.exe is located. I don't know what's the best setting for your GPU, but I can paste an example, if you can't find the file.


Edit: Also, do change rpcallowip to 127.0.0.1
And perhaps add daemon=1

[BitOffer]

Who is going to stick around and mine this when they could be mining something else. I can only see testers mining this and it could take days to get to block 2600.

I like the method, but should have been set to start at block 1000.

[phaddie]

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

This is not true.  I use intensity 21 on mine no problem.  I actually posted my conf file much earlir in the thread for my 290's.  I use TC 20481 and Intensity 21 with my regular settings from scrypt.  I get between 390-440 (depending on memory hynix do much better) per card, and 0 HW.  Also from what I have heard the amount of RAM you have matters (not confirmed though).  I would say your TC is set incorrectly.

  Phad

[jollyriffic]

with a single 7950 am i better off solo or in a pool for the start of the coins?

[bitchallenged]

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126


Do I need to instead put that in the vertminer folder or is there something I am missing?

Nope, but there should be vertminer.conf file in the folder where vertminer.exe is located. I don't know what's the best setting for your GPU, but I can paste an example, if you can't find the file.

It does, but it has pool information in it, do I simply remove the pool information and leave the settings...how does vertminer know to mine GPUcoin? forgive me I have only ever mined in pools, first foray into solo mining

[phaddie]

with a single 7950 am i better off solo or in a pool for the start of the coins?

Diff is almost 4 already, and no one is making any coins yet.  I would say you should be in a pool for sure.

[col_oddball]

All I get are boo's (solo mining)
[2014-03-08 17:26:41] DEBUG: got new work in 3 ms
[2014-03-08 17:26:50] DEBUG: hash <= target
Hash:   00000000006160d405a3e6d1c75f947c2f012a6909b467ba52d39ab21a594cd1
Target: 000000005936c200000000000000000000000000000000000000000000000000
[2014-03-08 17:26:50] GPU #0: GeForce GTX 670, 121092 khash/s
[2014-03-08 17:26:50] accepted: 0/3 (0.00%), 121092 khash/s (booooo)
[2014-03-08 17:26:50] DEBUG: got new work in 2 ms
[2014-03-08 17:26:53] DEBUG: hash <= target
Hash:   0000000008b25c28f81b8bb16fc8b8ebd03c36e2438326e84d2179ea00f4f0f1
Target: 0000000058f61d00000000000000000000000000000000000000000000000000
[2014-03-08 17:26:53] GPU #0: GeForce GTX 670, 121022 khash/s
[2014-03-08 17:26:53] accepted: 0/4 (0.00%), 121022 khash/s (booooo)
[2014-03-08 17:26:53] DEBUG: got new work in 1 ms
[2014-03-08 17:27:03] GPU #0: GeForce GTX 670, 121505 khash/s
[2014-03-08 17:27:03] DEBUG: got new work in 3 ms
[2014-03-08 17:27:13] GPU #0: GeForce GTX 670, 121359 khash/s
[2014-03-08 17:27:13] DEBUG: got new work in 1 ms
[2014-03-08 17:27:18] DEBUG: hash <= target
Hash:   00000000509d83f169208c61bda113497b33cb13f89c90778cf21e43e01421e1
Target: 000000005897fe00000000000000000000000000000000000000000000000000
[2014-03-08 17:27:18] GPU #0: GeForce GTX 670, 121072 khash/s
[2014-03-08 17:27:18] accepted: 0/5 (0.00%), 121072 khash/s (booooo)
[2014-03-08 17:27:18] DEBUG: got new work in 1 ms

[MGGB]

I could use one to see if this works.

GcTySMAchqvM72VdTTRRTWxrgDCvfU7Kgo

Thanks for helping out

[tagged]

DUMPING ALL MY COINS HERE

Buy them before they are gone!  

You were all right, i am pumping and dumping!   These are the cheapest GPUCoins on ANY exchange
https://www.Atomic-Trade.com?refid=HJY2AYLJ

[byteflush]

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126


Do I need to instead put that in the vertminer folder or is there something I am missing?

Nope, but there should be vertminer.conf file in the folder where vertminer.exe is located. I don't know what's the best setting for your GPU, but I can paste an example, if you can't find the file.

It does, but it has pool information in it, do I simply remove the pool information and leave the settings...how does vertminer know to mine GPUcoin? forgive me I have only ever mined in pools, first foray into solo mining

I haven't solo-mined with vertminer, but it might go something like this:

Code:

"pools" : [
	{
		"url" : "http://127.0.0.1:3344",
		"user" : "y",
		"pass" : "x"
	}
]

Try it out, might work.

[jollyriffic]

with a single 7950 am i better off solo or in a pool for the start of the coins?

Diff is almost 4 already, and no one is making any coins yet.  I would say you should be in a pool for sure.

i mean once we hit 2600

[bitchallenged]

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126


Do I need to instead put that in the vertminer folder or is there something I am missing?

Nope, but there should be vertminer.conf file in the folder where vertminer.exe is located. I don't know what's the best setting for your GPU, but I can paste an example, if you can't find the file.

It does, but it has pool information in it, do I simply remove the pool information and leave the settings...how does vertminer know to mine GPUcoin? forgive me I have only ever mined in pools, first foray into solo mining

I haven't solo-mined with vertminer, but it might go something like this:

Code:

"pools" : [
	{
		"url" : "http://127.0.0.1:3344",
		"user" : "y",
		"pass" : "x"
	}
]

Try it out, might work.

ahhhh, and I am an idiot, use localhost as the 'pool' thanks for the help!!!

[Suporte]

Why is very Difficulty mining 1 GPU now?


thx

[fengsehuanxiang]

GLZrC8ov1zHFfhZcQV26cRX8W2a6QPuZD5

[lemfuture]

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

This is not true.  I use intensity 21 on mine no problem.  I actually posted my conf file much earlir in the thread for my 290's.  I use TC 20481 and Intensity 21 with my regular settings from scrypt.  I get between 390-440 (depending on memory hynix do much better) per card, and 0 HW.  Also from what I have heard the amount of RAM you have matters (not confirmed though).  I would say your TC is set incorrectly.

  Phad

+1 thanks you're right about thread concurrency

[byteflush]

ahhhh, and I am an idiot, use localhost as the 'pool' thanks for the help!!!

Nah, that stuff happens to all of us. Now, as I'm still not sure if there are different forks (forgive my lack of trust) or if my wallet is working as it should, can you or someone else send a small amount of GPUC to GSA2aesx9fyuFcmJ2RkvHczBn7QepSNn9x ? I will return it, I just gotta know that it's working.