[GPUC] GPU Coin | Mandatory Wallet Update

[ScottAllyn]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?

I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:

https://bitcointalk.org/index.php?topic=469887.msg5597962#msg5597962

[bayn070]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Code:

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20

getting on average 320kh with my 7950 with those settings.
so far only had 1 hw error.
have core at 1100 and ram at 1500.

i've read countless times that ram speed doesn't matter for -n but i'm not changing my settings.

may have your voltage too low to support that intensity. that was my problem anyway.

[trupa]

Calgary - Canada P2P node 1% fee

http://96.51.143.9:9404/

[j23a]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?

I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:

https://bitcointalk.org/index.php?topic=469887.msg5597962#msg5597962

I copied your conf file, put my information, and it's giving me the best kh/s I've gotten, by far. Both my GPUs are also working. Very nice.

[djek31]

@ vesperwillow What i meant is that you will be wasting your time mining for this as you will be in a que as with asic miners and sha miners because there is soo many people mining this coin amd the peoplpe that have created the coin can only supply a certain amount of gpu's a month as there are soo many other suppliers and on-line stores out there with oreders from the factories that can only make soo many cards a month!

[Reboot2014]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Did you just start mining at that pool?

Nope...couple hours now...

[tagged]

At block 2253, EST for block 2600 has been adjusted to 10PM EST!


GPUCoin Trading Thread: https://bitcointalk.org/index.php?topic=508026.0
GPUCoin Auction: https://bitcointalk.org/index.php?topic=496045.msg5462750#msg5462750

See OP for the following Wallets:
Windows
OSX
Linux

and

Blockexplorer is now posted as well!

See trading thread & op for 4 exchanges now trading GPUCoin.

See freenode IRC #gpucoin for current chat, GPUC & Devs are hanging out there and occasionally piping in.

[jgaspar]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Code:

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20

getting on average 320kh with my 7950 with those settings.
so far only had 1 hw error.
have core at 1100 and ram at 1500.

i've read countless times that ram speed doesn't matter for -n but i'm not changing my settings.

No matter what i do i can't make my 9750 run at --thread-concurrency 19712 always gives me this error

Error -4: Enqueueing kernel onto command queue

Any ideas?

[trupa]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Code:

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
vertminer.exe -o stratum+tcp://gpuc.allpoolz.com:8080 -u jollyriffic.1 -p x -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-powertune 20

getting on average 320kh with my 7950 with those settings.
so far only had 1 hw error.
have core at 1100 and ram at 1500.

i've read countless times that ram speed doesn't matter for -n but i'm not changing my settings.

No matter what i do i can't make my 9750 run at --thread-concurrency 19712 always gives me this error

http://vvcap.net/db/a6L25b_Rs74gSSgCTte8.htp

Any ideas?

How much RAM does your rig have?? try lowering the TC

[jgaspar]

I have 4G of Ram, lowering  --thread-concurrency  to around 12000 will work, but then i cannot go over I 13 or I will get HW error, all in all the best i could make it go was about 150 kh/s  and that seems low for a 7950

[goodluck0319]

I don't know if it is correct:

according to my stat:

I make 3.688 per GPU/day and 60 USD/day.

3.688 x 30 = 110 GPU per month

110 x 60 = 660 per month

[trupa]

I have 4G of Ram, lowering  --thread-concurrency  to around 12000 will work, but then i cannot go over I 13 or I will get HW error, all in all the best i could make it go was about 150 kh/s  and that seems low for a 7950

Try adding shaders option i think it should be 2048 for the 7950

[tomewok]

I have 4G of Ram, lowering  --thread-concurrency  to around 12000 will work, but then i cannot go over I 13 or I will get HW error, all in all the best i could make it go was about 150 kh/s  and that seems low for a 7950

Try tc 8192, look-up gap 0 and shaders 1792

[SP4RK7]

I don't know if it is correct:

according to my stat:

I make 3.688 per GPU/day and 60 USD/day.

3.688 x 30 = 110 GPU per month

110 x 60 = 660 per month

In about 5 hours you will be making a lot more than 3.6 GPU a day. I'm not sure how many times it has to be posted, but once we get to block 2600 the rewards per block go up from 1 to 20000

Ignore the USD a day that is left over from litecoin mining or something similar and isn't related to GPUC

[djm34]

I don't know if it is correct:

according to my stat:

I make 3.688 per GPU/day and 60 USD/day.

3.688 x 30 = 110 GPU per month

110 x 60 = 660 per month

you should calculate with the USD, that will look larger

[ScottAllyn]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?

I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:

https://bitcointalk.org/index.php?topic=469887.msg5597962#msg5597962

I copied your conf file, put my information, and it's giving me the best kh/s I've gotten, by far. Both my GPUs are also working. Very nice.

Nice! Glad that I could help!

[lemfuture]

I'm currently mining with a single 7950 and getting 280kH/s or so but the pool is only showing 30 kH/s??

Without more info, there's not much anybody can do except recommend some settings. How long have you been mining on the pool at that speed? Are you getting hardware errors? What's your accepted:rejected ratio?

I have two 7950 cards running @ ~ 343 Kh/s each. My settings can be found here:

https://bitcointalk.org/index.php?topic=469887.msg5597962#msg5597962

I copied your conf file, put my information, and it's giving me the best kh/s I've gotten, by far. Both my GPUs are also working. Very nice.

Nice! Glad that I could help!

help me put avi too

[jgaspar]

I have 4G of Ram, lowering  --thread-concurrency  to around 12000 will work, but then i cannot go over I 13 or I will get HW error, all in all the best i could make it go was about 150 kh/s  and that seems low for a 7950

Try tc 8192, look-up gap 0 and shaders 1792

That helped thanks!  doing around 275 Kh/s with

-I 13 -w 256 --thread-concurrency 8192 -g 1 --lookup-gap 0 --shaders 1792 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20  

Running now running with --gpu-engine 850 and Vcc 1.068 for 202 Kh/s, previously 140-150 Kh/s

[micryon]

Okay guys, I've now personally switched my miners onto GPUC..

Mostly because i need to take my kids swimming in the next few hours and i won't be online for the switch over past 2600..

But hey.. that's what the convenience of soft launching affords.

Good luck to everyone.. and go go GPUCoin!

[Omega0255]

Okay guys, I've now personally switched my miners onto GPUC..

Mostly because i need to take my kids swimming in the next few hours and i won't be online for the switch over past 2600..

But hey.. that's what the convenience of soft launching affords.

Good luck to everyone.. and go go GPUCoin!

Had you guys started earlier or lowered the that number down to 2000 or 1500, you'd be churning out coins by now.