[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Etherion]

How to monitor my rigs remotely? I have a few rigs and I am not sure when they go office-line. I now use Teamviewer to login in and check them ever few hours. But this is not practical as 90% of the time the rig hangs when TV starts.
 
If I was mining to one pool with one algorithm I could turn on monitoring on the pool. But as I am now using MultiPoolMiner the miner also switches.
So I can not have mining pool hub pools send me an email every time one of the rigs switches to the new miner/algorithm.

Some of the miners do provide an API. Such as Clymore I can monitor each right from my phone. But not the others. any suggestions what web base monitoring i can run on the rigs to report the hash rate? I have looked at Miner Monitor but that also trys to do what MultiPoolMiner does but with fewer algorithms.

[1714038137]

1714038137

[1714038137]

1714038137

[1714038137]

1714038137

[Etherion]

Well if mining pool hub had a single dashboard showing the workers and what they are mining it would solve all my problems. Then I can login to MPH and watch which of my workers are no longer running. In fact, at this moment I can't track what the real submits shares are.

you really need a consolidated worker page that summarise what is going on.

[tarantoga]

How to monitor my rigs remotely? I have a few rigs and I am not sure when they go office-line. I now use Teamviewer to login in and check them ever few hours. But this is not practical as 90% of the time the rig hangs when TV starts.
 
If I was mining to one pool with one algorithm I could turn on monitoring on the pool. But as I am now using MultiPoolMiner the miner also switches.
So I can not have mining pool hub pools send me an email every time one of the rigs switches to the new miner/algorithm.

Some of the miners do provide an API. Such as Clymore I can monitor each right from my phone. But not the others. any suggestions what web base monitoring i can run on the rigs to report the hash rate? I have looked at Miner Monitor but that also trys to do what MultiPoolMiner does but with fewer algorithms.

Imperfect ideas for local monitoring:

a) GPU temperature
Use a program that monitors GPU temperature and notifies you when it drops below X.
Downside: does not catch total system failures

b) PSU with a digital interface, such as the Corsair Professional series
Connect the PSU to a cheap single-board computer, such as the Raspberry Pi. Notify when wattage drops below X
Downside: needs Linux knowledge
Neat side-effect: You can maintain a log with exact power consumption stats.

I'm just getting started with mining and I will opt for the latter.

[nitrobg]

cgminer.exe from the Digibyte-Skein Pool doesn't work on Windows 10 with RX 480 and latest Crimson 17.5.1. No error message at all, it just closes and gives this error in the event log:

Faulting application name: cgminer.exe, version: 0.0.0.0, time stamp: 0x530a6261
Faulting module name: amdocl.dll, version: 22.19.162.4, time stamp: 0x58fea672
Exception code: 0xc0000005
Fault offset: 0x001fc5c6
Faulting process id: 0x1374
Faulting application start time: 0x01d2da74096db9c3
Faulting application path: C:\Users\nitrous\Desktop\MultiPoolMinerV2.5.2\Bin\AMD-Reorder\cgminer.exe
Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\c0313676.inf_amd64_96bbc33bec5c7fae\amdocl.dll
Report Id: 54628b3f-5548-4bd5-911a-4007e3b0a540
Faulting package full name:
Faulting package-relative application ID:

The command line is the default one from aaronsace's multipool miner but it crashes even without a command line and on a clean download of this file.
What's happening?

[miningpoolhub]

Well if mining pool hub had a single dashboard showing the workers and what they are mining it would solve all my problems. Then I can login to MPH and watch which of my workers are no longer running. In fact, at this moment I can't track what the real submits shares are.

you really need a consolidated worker page that summarise what is going on.

Yeah I agree. Consolidated worker page is needed and it's my on my TODO list.

Thank you for suggestion.

[The Cryptophilanthropist]

I have question re: MultiPoolMiner , "Just right click and run the script then enter your MiningPoolHub username once prompted; that’s it."

I'm assuming this is referring to the start.bat file?

Is this intended to run benchmarks? Also when this runs I receive multiple miner start request windows, I have run this a few times trying to understand, what and
when things are or are supposed to be happening. I do not receive a prompt to enter my username. I am an experienced miner and have an MPH account I have tried modifying start.bat, still the outputs are a bit confusing. I have not however used this type of multiminer, I have used profit switching scripts though.

This is a wonderful program! I would love to use/understand it.

Could someone please tell me what/when I should be looking for??

Maybe I am just missing something. However I feel like if I am confused a bit, new miners may benefit from a 1. 2. 3. kind of quick how to.

Thank you very much I appreciate someone straightening me out because I am feeling a little stupid at the moment

(Rig: Dual Nvidia Gpu's and 12 core E-2560 series Xeon)

*** Also noted that multiple (gpu) miners launch at once causing errors ***** Also MEM ALLOC fail on Stak miner when I already run this miner successfully ***

[ioglnx]

Hello,

I have a transaction where it states the output is unspent even after 140 confirmations already - it not the first time that a transaction takes long from mph but this time it's already 1h ago.
Can you please check the payment Pool operator?

https://digiexplorer.info/tx/e31aba076c64c752da530af57fb0277ab8fd8c20a5a7bf8a32f50696c5dbd29c
What can I do and what is wrong here?

thanks in advance

[The Cryptophilanthropist]

I have question re: MultiPoolMiner , "Just right click and run the script then enter your MiningPoolHub username once prompted; that’s it."

I'm assuming this is referring to the start.bat file?

Is this intended to run benchmarks? Also when this runs I receive multiple miner start request windows, I have run this a few times trying to understand, what and
when things are or are supposed to be happening. I do not receive a prompt to enter my username. I am an experienced miner and have an MPH account I have tried modifying start.bat, still the outputs are a bit confusing. I have not however used this type of multiminer, I have used profit switching scripts though.

This is a wonderful program! I would love to use/understand it.

Could someone please tell me what/when I should be looking for??

Maybe I am just missing something. However I feel like if I am confused a bit, new miners may benefit from a 1. 2. 3. kind of quick how to.

Thank you very much I appreciate someone straightening me out because I am feeling a little stupid at the moment

(Rig: Dual Nvidia Gpu's and 12 core E-2560 series Xeon)

*** Also noted that multiple (gpu) miners launch at once causing errors ***** Also MEM ALLOC fail on Stak miner when I already run this miner successfully ***

Another observation, XMR stak miners (cpu and gpu) fail to run test, I manually edited the conf files in BIN and can run them from within the Bin folder but fail during benchmarks. The stak cpu miner requires to be run as admin, but the Nvidia stak should not fail and it is the first failed to run in the list.
Thanks for any help

[Kainzo]

@miningpoolhub
My hashrate is 17 but on my screen its actually 27+, why is there such a drop? how do I fix this?

My mining.bat file looks like this, is this correct?

Code:

ethminer -G -S us-east.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x
ethminer -G -S europe.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x
ethminer -G -S asia.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x

[Easteregg69]

Mining Pool Hub

Pool URL : https://miningpoolhub.com


Super powerful monster servers are running.
Please come and enjoy.

Duff. Could you please avoid target="_blank" on you site? Gives me a heluva lot open Windows when working with it.

Thx.

[constantine24x]

hello,

i'm mining xmr and noticed that today my miners are submitting invalid shares. i've never  had this issues for the past week.
i'm using wolf miner on ubuntu. i've stopped mining for now.. any suggestions? thanks!

[constantine24x]

hello,

i'm mining xmr and noticed that today my miners are submitting invalid shares. i've never  had this issues for the past week.
i'm using wolf miner on ubuntu. i've stopped mining for now.. any suggestions? thanks!

it seems rebooting the miners did the trick.. that was weird tho..

[miningpoolhub]

Hello,

I have a transaction where it states the output is unspent even after 140 confirmations already - it not the first time that a transaction takes long from mph but this time it's already 1h ago.
Can you please check the payment Pool operator?

https://digiexplorer.info/tx/e31aba076c64c752da530af57fb0277ab8fd8c20a5a7bf8a32f50696c5dbd29c
What can I do and what is wrong here?

thanks in advance

Unspent transaction doesn't mean that transaction is not confirmed.
Every output transactions can be one of other input transaction. If your coin is not sent to other wallet address, then it will be remain unspent.

So your coins are correctly sent. You can manage them.

[miningpoolhub]

@miningpoolhub
My hashrate is 17 but on my screen its actually 27+, why is there such a drop? how do I fix this?

My mining.bat file looks like this, is this correct?

Code:

ethminer -G -S us-east.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x
ethminer -G -S europe.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x
ethminer -G -S asia.ethash-hub.miningpoolhub.com:20535 -O Kainzo.1:x

Dashboard or Workers page is not accurate. It just tells that actual hashrate is near that value.

I recommend you to try claymore miner. claymore miner performs well and stability is better in most cases.

[miningpoolhub]

Mining Pool Hub

Pool URL : https://miningpoolhub.com


Super powerful monster servers are running.
Please come and enjoy.

Duff. Could you please avoid target="_blank" on you site? Gives me a heluva lot open Windows when working with it.

Thx.

If you click pool name from the left menu bar, it will be opened at current window.
If you click Blue colored pool names from profitability table, it will be opened in new tab/window.

I personally open +100 tabs via Chrome. I'm tab holic.
I'll consider changing it, but some miners would like current webpage too.

Can you clarify what link bothers you most?

[flminer]

Just tried to set up on your pool with this bat:
ccminerAlexis78.exe  -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee

It will not connect to server. What did I get wrong? Thanks

[Lercker]

Just tried to set up on your pool with this bat:
ccminerAlexis78.exe  -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee

It will not connect to server. What did I get wrong? Thanks

Try: stratum+tcp://hub.miningpoolhub.com:17016

12016 is for multialgo switching.

[YarMiner]

Just tried to set up on your pool with this bat:
ccminerAlexis78.exe  -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee

It will not connect to server. What did I get wrong? Thanks

Hello! I have the same problem, but I'm using SimpleMining OS with claymore-eth-v9.4 and this config:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal YarMiner.$rigName -eworker YarMiner.$rigName -esm 0 -epsw x -allpools 1 -allcoins 1

It will not connect to the server too. What should I do? Thank you!

[flminer]

Just tried to set up on your pool with this bat:
ccminerAlexis78.exe  -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee

It will not connect to server. What did I get wrong? Thanks

Try: stratum+tcp://hub.miningpoolhub.com:17016

12016 is for multialgo switching.

That is not working either.

[ioglnx]

Could you implement static diff for DGB Pools. Otherwise you load the little miners with to high diff and they never get anything.
Since the explode of hashing there even with 12000MH Skein you don't have much luck most of the hash is vaporized of the speed new blocks comes and so you hash for nothing than just hot air.

Other pools did it too ...small miners will appreciate the option.