Nostromo964
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 04, 2018, 12:43:47 AM |
|
Any idea when Bitcoin Private pools will be up?
|
|
|
|
sidbarrett1000
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 04, 2018, 08:10:23 AM |
|
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value. Keep in mind that difficulty value must be stabilized. We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX" ex) d=0.0312 Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again. You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug. d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Please can you to be more clear about point "2", I see that claymore setting the diff with number without "dot" example "52216", can you write an example string to put in the config file? Thanks in advance
|
|
|
|
Ruso21
Member
Offline
Activity: 115
Merit: 12
|
|
March 04, 2018, 11:50:29 AM |
|
Having problems with Equihash autoswitch MPH multi-algo switchinghttps://miningpoolhub.com/?page=gettingstartedasia.equihash-hub.miningpoolhub.com:12023 us-east.equihash-hub.miningpoolhub.com:12023 most of the cases doesn't mine the most profitable coin, and doesn't switch properly. MPH Custom autoswitch (3 equihash coin)asia.equihash-hub.miningpoolhub.com:17023 (ZEN) asia.equihash-hub.miningpoolhub.com:17023 (ZEC) asia.equihash-hub.miningpoolhub.com:17023 (BTG) same case. And yes, I have the profit switch threshold on Bminer Multi-algo switch mining on Miningpoolhubhttps://www.bminer.me/examples/stratum://foo.w:pwd@us-east.equihash-hub.miningpoolhub.com:17023 sometimes gives like $3 above from what it says in awesome miner, sometimes gives like $2 less. From the other hand, sometimes mine not the most profitable. so what's the point of this pool???
|
|
|
|
CryptoWaffle
Jr. Member
Offline
Activity: 187
Merit: 2
|
|
March 04, 2018, 12:09:29 PM |
|
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
|
|
|
|
Nostromo964
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 04, 2018, 08:54:25 PM |
|
Any idea when Bitcoin Private pools will be up?
They announced they will add it ? Its already up on Supernova and others, i would hope they would add it since they support ZCL which its forked from. Would prefer to mine using MPH over the others.
|
|
|
|
bassistas
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 04, 2018, 09:54:25 PM |
|
anyone know how can I claim the btcp from zcl coins I had stuck in cash out from mph pool at the time of snapshot? They arrived to my wallet one hour after the snapshot
|
|
|
|
CryptoWaffle
Jr. Member
Offline
Activity: 187
Merit: 2
|
|
March 04, 2018, 09:55:01 PM |
|
Any idea when Bitcoin Private pools will be up?
They announced they will add it ? Its already up on Supernova and others this is not how it works. Admin is insanely lazy now we need an alternative asap
|
|
|
|
pete83
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 04, 2018, 10:43:46 PM |
|
Any idea when Bitcoin Private pools will be up?
They announced they will add it ? Its already up on Supernova and others this is not how it works. Admin is insanely lazy now we need an alternative asap They posted on their twitter acc that they will support btcp but want to test the wallet first. But latter posts said they are not sure if they will add it if i read it right. I hope they will add it https://twitter.com/MiningPoolHub/status/969222871909253120
|
|
|
|
pete83
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 04, 2018, 10:55:25 PM |
|
anyone know how can I claim the btcp from zcl coins I had stuck in cash out from mph pool at the time of snapshot? They arrived to my wallet one hour after the snapshot
nope i guess only the MPH team can tell you.
|
|
|
|
Nostromo964
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 04, 2018, 11:45:21 PM |
|
Any idea when Bitcoin Private pools will be up?
They announced they will add it ? Its already up on Supernova and others this is not how it works. Admin is insanely lazy now we need an alternative asap They posted on their twitter acc that they will support btcp but want to test the wallet first. But latter posts said they are not sure if they will add it if i read it right. I hope they will add it https://twitter.com/MiningPoolHub/status/969222871909253120Ok cool, then probably the next week or two should be up, the wallets are working great so far. Hope they get all that up soon, prefer MPH over Supernova and others.
|
|
|
|
HavenZone
Jr. Member
Offline
Activity: 37
Merit: 1
|
|
March 05, 2018, 09:25:45 AM |
|
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value. Keep in mind that difficulty value must be stabilized. We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX" ex) d=0.0312 Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again. You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug. d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Please can you to be more clear about point "2", I see that claymore setting the diff with number without "dot" example "52216", can you write an example string to put in the config file? Thanks in advance good luck with it... I've yet to get the d=xxx to work on any of my antminers ... I've been hoping for them to get the Siacoin pool to work with the A3 but no luck there (it keeps setting the diff to 1 no matter what I put). If they would get it to work they could save the siacoin pool on MPH instead of having a dead pool in the list. In the mean time I'm sending 3.4TH to siamining.com waiting on MPH to get this to work. I guess that is why the scrypt and x11 also don't seem to get much traffic.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
March 05, 2018, 12:28:32 PM |
|
just want to confirm fees with MPH.
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks zac
|
|
|
|
Boriss
|
|
March 05, 2018, 01:11:36 PM |
|
just want to confirm fees with MPH.
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks zac
auto-switching? you mean auto-exchange? auto-switching is just that, switching to mine different coin.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
March 05, 2018, 01:17:12 PM |
|
auto-switching? you mean auto-exchange?
auto-switching is just that, switching to mine different coin.
yes sorry that's what i meant. auto-exchange rgs zac
|
|
|
|
SYDDOS
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 05, 2018, 03:20:03 PM Last edit: March 05, 2018, 11:37:55 PM by SYDDOS |
|
A Little Help PLEASE from MPH support.
I have successfully configured Awesome Mining to work with MPH (Mining Pool Hub) with GPU and CPU.
I had mined more than 70 coins which were stored in the normal wallet without an "AUTOMATIC PAYOUT THRESHOLD" being set.
About a week ago I decided to set an Auto Payout Threshold for the coins to go to my wallet address, but they have not arrived and I can't see the transaction on on MPH.
Could the Electroneum pool hardfork bug have blocked or destroyed the transfer to my wallet?
I would appreciate if someone at MPH would check if the transfer was made to my wallet address: etnkPiKgUPHKKjVp9qoBaJSu4cL8bgGe3SAcARHz5bHPGypaN895vf9JTgCXzqHbgTP4Ykuge58ded1 p6wLNkLeX1cmrStt4BF
NOTE I have since used a different wallet address to which I have received coins ok .
Any help from MPH support would be greatly appreciated.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
March 05, 2018, 08:18:19 PM |
|
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet... i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
|
|
|
|
Nostromo964
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 05, 2018, 11:13:48 PM |
|
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet... i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
If you want payouts in ETH you need to turn off ETH on the auto exchange page so everything goes into the normal ETH wallet and not the ETH auto exchange wallet.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
March 06, 2018, 04:57:06 AM |
|
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet... i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
If you want payouts in ETH you need to turn off ETH on the auto exchange page so everything goes into the normal ETH wallet and not the ETH auto exchange wallet. hmm i figured that would be automatic if you specify an auto exchange coin.. i turned ethereum off.. lets see if that fixes it.
|
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
March 06, 2018, 09:11:53 AM |
|
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet... i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
I noticed that too some time ago. Just disable autoexchange for ethereum on the "Auto Exchange" page
|
|
|
|
|