[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[markoi92]

its working mining europe etash?

[carlo_0000]

yes it s working now

[Call_Me_Bambi]

Currently mining dual mining Ethereum / Verge on GPU
Adding Verge has no impact on Ethereum hash rate which is nice.

Also mining Monero on CPU (xmrig) but this does impact Ethereum hash rate.
Tried Yenten (yescryptR16 algo) this has no impact on Ethereum hash rate, BUT this algo is not on MPH

Can anyone recommend a CPU mineable coin that is on MPH that doesn't affect Ethereum GPU mining speed like Monero does?

Thanks in advance for any and all assistance.

I don't know of any CPU minable coin that MPH has that will not affect your Ethereum mining but one thing you could try, and this may take some time, is to go through the list of MPH cpu minable coins and test them out one-at-a-time. Guess this is not the answer your are hoping for but it may be something to try while you wait for a positive answer.

[carlo_0000]

europe eth is down again

[Myth888]

profit is down for a almost a week now for eth... by at least 10% compared to whattomine...

[Myth888]

Currently mining dual mining Ethereum / Verge on GPU
Adding Verge has no impact on Ethereum hash rate which is nice.

Also mining Monero on CPU (xmrig) but this does impact Ethereum hash rate.
Tried Yenten (yescryptR16 algo) this has no impact on Ethereum hash rate, BUT this algo is not on MPH

Can anyone recommend a CPU mineable coin that is on MPH that doesn't affect Ethereum GPU mining speed like Monero does?

Thanks in advance for any and all assistance.

any cryptonight coins should not affect your eth. but u need to leave a little processing power for eth. advice is activate your hyperthreading. then select only 1 thread per core. it will only drop your performance a little. maybe 5% for the cpu mining but wont affect eth. You should get 50% usage on your cpu miner no more than that which leaves ample room for gpu to gave processing power

[jkminkov]

With task manager drop cpu miner priority to low, for cryptonight set odd cores, for others you may uncheck core 0, or 0 and 1 as last resort, for gpu miner set high priority and even cores.
Process Lasso can do that stuff instead of you.

[Myth888]

if hyperthreading is activated and properly configured miner then it should not affect. alternatively you can use xmrig which is more automatic in setting cores for you. But i have been suffering low profits in MPH for a week so im going to try and use other pools until it is resolved. im leaving a single gpu to check on its performance daily. ill come back when its back to normal

[GedByrneUK]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

[Myth888]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

its currently not profitable to mine etn on any pc or gpu. if u want some etn use the mobile miner. Asics are on etn atm. Mine XMR for now and just convert it to etn if you really want etn

[GedByrneUK]

The profitability isn't the concern for me here - it is the fact that it is not working.

I am trying to build a wide spread portfolio of coins/tokens.  I do not plan to mine it for too long and will be switching back to Equihash soon.  I am already using the mobile miners - but thanks for the advice anyway.

[Myth888]

The profitability isn't the concern for me here - it is the fact that it is not working.

I am trying to build a wide spread portfolio of coins/tokens.  I do not plan to mine it for too long and will be switching back to Equihash soon.  I am already using the mobile miners - but thanks for the advice anyway.

i do not use nvidia cards but here is my epool setting for claymore. i have not mined it in a while though

POOL: ssl://asia.cryptonight-hub.miningpoolhub.com:20596, WALLET: username.id, PSW: x, ALLPOOLS: 1

Sorry cant be more help

[GedByrneUK]

The profitability isn't the concern for me here - it is the fact that it is not working.

I am trying to build a wide spread portfolio of coins/tokens.  I do not plan to mine it for too long and will be switching back to Equihash soon.  I am already using the mobile miners - but thanks for the advice anyway.

i do not use nvidia cards but here is my epool setting for claymore. i have not mined it in a while though

POOL: ssl://asia.cryptonight-hub.miningpoolhub.com:20596, WALLET: username.id, PSW: x, ALLPOOLS: 1

Sorry cant be more help

Thanks anyway.  Anyone else managed to get it working with xmr-stak or ccminer specifically with nVidia cards?

[Call_Me_Bambi]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

[GedByrneUK]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

Apologies for the delay in responding.

In ccminer I have the following :

%DWAL%  = <myetnaddresshere>
Fork = Klaust (have also tried several others)
Hash = cryptonight - xmr cryptonight
Wallet and worker template = %DWAL%.%WORKER_NAME%
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Extra Params =
Extra Arguments for miner =


In xmr-stak I have the following :

%DWAL% = <myetnaddresshere>
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Config Override =
AMD config override = "gpu_threads_conf" : [], "platform_index" : 0,
Nvidia config override = "gpu_threads_conf" :
[
  { "index" : 0, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 1, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 2, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 3, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 4, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 5, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 6, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 7, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 8, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 9, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
]
CPU config override =

[Call_Me_Bambi]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

Apologies for the delay in responding.

In ccminer I have the following :

%DWAL%  = <myetnaddresshere>
Fork = Klaust (have also tried several others)
Hash = cryptonight - xmr cryptonight
Wallet and worker template = %DWAL%.%WORKER_NAME%
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Extra Params =
Extra Arguments for miner =


In xmr-stak I have the following :

%DWAL% = <myetnaddresshere>
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Config Override =
AMD config override = "gpu_threads_conf" : [], "platform_index" : 0,
Nvidia config override = "gpu_threads_conf" :
[
  { "index" : 0, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 1, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 2, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 3, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 4, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 5, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 6, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 7, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 8, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 9, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
]
CPU config override =

[Electronium Mining]

I see you are using HiveOS, as a test to check your miner is setup OK stop using HiveOS and mine directly to MPH, this will eliminate the possibility that there is a problem with HiveOS.

This may make everything I've typed below moot, but MPH does not require an ETN address but a "Username.Workername", should your config not be (or is it a HiveOS thing):
"%DWAL% = <Username.Workername>" and not "%DWAL% = <myetnaddresshere>"

When you first run xmr-stax-win64 it will ask for some details and create various files, these can be later edited for your specific needs.
Files created:
amd.txt (or maybe nvidia.txt, I don't have an Nvidia card), config.txt and cpu.txt.

The amd.txt/nvidia.txt file lets you tweak the GPU performance.
The cpu.txt lets you tweak CPU mining parameters.
The config.txt for setting various miscellaneous parameters, such as display options.

I've only used xmr-stak-win64, latest V2.4.3 with AMD cards but the configuation should be the same for Nvidia (with minor chages).

Your xmr-stak configuration is somewhat different to mine, this is how I have it set up, just change anything that is Nvidia specific.
The following works for me and I see ETN in my MPH wallet.



The *.bat file; change --noNVIDIA to --noAMD, and remove --noCPU if you want CPU mining, --noUAC is to stop Windows10 asking for permission everytime I start it up on my Win10 rig and "timeout 3" is a 3 second delay before starting miner.

Code:

timeout 3
xmr-stak -C ETN.txt --noNVIDIA --noCPU --noUAC

The ETN.txt file. The only change here is "UserName.WorkerName" , change this to your User & Worker names.

Code:

"pool_list" :
[
	{"pool_address" : "europe.cryptonight-hub.miningpoolhub.com:20596", "wallet_address" : "UserName.WorkerName", "rig_id" : "", "pool_password" : "x", "use_nicehash" : false, "use_tls" : false, "tls_fingerprint" : "", "pool_weight" : 1 },
],

"currency" : "cryptonight",

Or you could use Claymore's Cryptonight miner it is easier to setup and is now free to use https://bitcointalk.org/index.php?topic=638915.0

Hope this helps.

[ermis1975]

Is there Metaverse alt coin to this pool?

[Bitcoin5678]

Someone got problems connecting to zcoin asia server?  Im having stratum fail while my rigs in Europe are still connected.

http://i64.tinypic.com/34rdtn8.jpg

[Myth888]

It seems eth really is paying lower at least for a few days. Tried to mine at same time on another pool. Avg here seems lower for now. I guess i would have to stay on the other pool with majority of my hash for a while.

[dragonmike]

Is the pool down?
Been trying to connect to the Cryptonight hubs but no luck for the past hour...