[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[outbreak198x]

I've noticed that it takes many minutes for their dashboard to be updated, maybe you haven't waited enough? You have the correct info and if your miner seems to be connected, mining and have successfully submitted shares, then wait a bit and then check your balance. Maybe even if the dashboard is not updating you have mined some blocks.
[/quote]

i think waiting for about 1 Day should be enough - and i got a lot accepted shares...  - pushing 20GH/s on it, so would be good if it will work...

[Dean P]

Anybody have any idea why ZClassic is getting stuck "On Exchange" and not auto switching?

[fuaimo3]

Please MPH it's been ages of the same coins,  please allow us to mine on your pool and utilize our hash better to make more for all. You are #1 when it comes to Baikal's hopefully you will let us mine nist5 (bullwark) and quark (alqo) in the algo switching.  Thanks for your consideration.

[not.you]

Please MPH it's been ages of the same coins,  please allow us to mine on your pool and utilize our hash better to make more for all. You are #1 when it comes to Baikal's hopefully you will let us mine nist5 (bullwark) and quark (alqo) in the algo switching.  Thanks for your consideration.

Second this.  In fact I was just going to inquire, why is there a quark port listed in the help section but no quark pool?  For the baikal-X or X10 or whatever they want to call it, quark and nist5 are the most profitable algorithms usually.  MPH already has a setup to take advantage of the other algos on these miners it would be helpful to add these two most profitable algos as well.  

Guessing that nist5 isn't likely though since bulwark isn't on any of the exchanges that MPH uses for auto-exchange...  Hmm maybe answered my own question about quark as well since it also isn't on those exchanges.  It's a bigger project for MPH for sure but maybe time to add cryptopia to the auto-exchanges? 

[loneSilentWolf]

Getting this while mining ethereum or ethereum classic on mining pool hub, other coins seems to be working. Ethash works fine if on some other pool what could be the problem ?  

https://i.imgur.com/TL7g04J.jpg

System specs :
i53450
12GB  Ram
r9 390 8G

[not.you]

Getting this while mining ethereum or ethereum classic on mining pool hub, other coins seems to be working. Ethash works fine if on some other pool what could be the problem ?  



System specs :
i53450
12GB  Ram
r9 390 8G

Did you try asia or US server just for troubleshooting purposes?

us-east.ethash-hub.miningpoolhub.com:<port number>
asia.ethash-hub.miningpoolhub.com:<port number>

[waynne]

why are we not mining bitcoin gold on switching port and mostly helping a whale with the zcash pool WTF!!!!!!!

[clt]

I'm getting ridicilously low credits for Equihash mining with 5x GTX 1070 with auto switch to ZCL. Normally it should be approximately 0.65 ZCL daily. But my last 8 streak is like :(1st day).67--(2).65--(3).26--(4).29--(5).91--(6).84--(7).36--(.15. Days 5 and 6 compensates days 3-4 and nearly. Average is .57 per day when you take these days into account. But for the last 2 days (7 and it starts to fall of again.

[siroliver]

yes same here running gold for 4 days i got .30 this place needs help and i still did not receive credit

[waynne]

why are we not mining bitcoin gold on switching port and mostly helping a whale with the zcash pool WTF!!!!!!!

wishing I did'nt say anything now we are only mining zclassic and zen!!! please op put all 4 coins back on switching port:17023!!!!

p.s could do with a few more coins and btcp active!!!

[keron62]

Its time that MPH drops the Zcoin worker minimum difficulty from 5 to a lower number because it can't just be constant bad luck being the reason that the pool is barely finding XZC blocks.

[scrypt]

Just realized that Monero auto withdrawals do not reach my wallet since 6 of April. Used the wallet for a long time, it was ok till the 6 of April.
Is it known problem related to the fork, or what?

[ateng]

@miningpoolhub:

i have some Bitcoin-Gold, Bitcoin-private & ethereum sitting on Auto Exchange wallet for days, tried to do manual transfer back and forth from Auto exchange to local wallet back to Auto exchange, but so far still the same. This is the first time I have this problem, I have stop & started auto exchange & manually transfer to AE wallet without any problem before.

Here's the screencaps with ID & dates on the transaction.
https://imgur.com/a/TPI97BT

[uzgen]

It seems that the option about static diff (sd=XXX) is not working for single card "rig" on zcoin pool.
I have 2 "rigs" with single 1080Ti each and it's not working. But in a rig with 2 1080Tis it works.

[ateng]

does miningpoolhub even bother checking in here anymore?

it's already a week or more & those coins are stuck, why can't i exchange them? wtf

[not.you]

Just realized that Monero auto withdrawals do not reach my wallet since 6 of April. Used the wallet for a long time, it was ok till the 6 of April.
Is it known problem related to the fork, or what?

Did you update your wallet software?  Last payout I received from pool for monero was 6/1 and it went through fine for me.  My wallet is v0.12.0.0.

[scrypt]

Just realized that Monero auto withdrawals do not reach my wallet since 6 of April. Used the wallet for a long time, it was ok till the 6 of April.
Is it known problem related to the fork, or what?

Did you update your wallet software?  Last payout I received from pool for monero was 6/1 and it went through fine for me.  My wallet is v0.12.0.0.

Yes, had updated to the latest 0.12.0 - this is how I knew there is some real problem, before the update I was OK thinking the cause is my outdated client.

The last tx I see in my wallet is "e4f4" with Blockheight: UNCONFIRMED. Following 13 txs are lost. 
https://i.imgur.com/MeVslax.jpg
https://i.imgur.com/MeVslax.jpg

[not.you]

Just realized that Monero auto withdrawals do not reach my wallet since 6 of April. Used the wallet for a long time, it was ok till the 6 of April.
Is it known problem related to the fork, or what?

Did you update your wallet software?  Last payout I received from pool for monero was 6/1 and it went through fine for me.  My wallet is v0.12.0.0.

Yes, had updated to the latest 0.12.0 - this is how I knew there is some real problem, before the update I was OK thinking the cause is my outdated client.

The last tx I see in my wallet is "e4f4" with Blockheight: UNCONFIRMED. Following 13 txs are lost.  
https://i.imgur.com/MeVslax.jpg

I see what you mean.  I'm not a monero expert but I noticed I had created a new address for myself back in Nov.  Is it possible that your payout address was created with a much older client and therefor stopped working with the v0.12.0.0 update?

Can you post one of the TXID links from that MPH transaction page you screen shotted?  So like one of these pages:
https://xmrchain.net/search?value=e3f690901d6914b672ebe78cf6d6fceaff3aa5f46d9d30d0206a23048e1d0ded

Just curious to see what it says.  They all say confirmed on the MPH page there.

Looking closer at the screen shot of your client, why does it seem to say that the e4f4... payment which MPH sent on 4-10 was only just received on 6-14?  That certainly seems odd.  Actually can you post the xmrchain page for that TXID?  Your client says unconfirmed for blockheight so that seems like a good one to examine.  I'm starting to suspect your client may not be syncing quite right, or at least not decoding transactions sent to it.

[Whatt]

beat the dead horse time again it seems.....

bitcoin-gold..  msg showing bittrx wallet under maint. has been gone for a couple of weeks now.

any idea when we should start seeing it auto-exchange again? even now it still pops u time to time on algo-switch for equihash
but it is enough where i am just about to disable equihash, i'm only a 4gpu miner but when i have almost $2 just sitting there.. i know i'll see it eventually
just like everything else here at MPH, i know it takes time sometimes, but even just some msg on the site somewhere sayin  hey we know n w are lookin into it would be nice...

[paulpoco]

beat the dead horse time again it seems.....

bitcoin-gold..  msg showing bittrx wallet under maint. has been gone for a couple of weeks now.

any idea when we should start seeing it auto-exchange again? even now it still pops u time to time on algo-switch for equihash
but it is enough where i am just about to disable equihash, i'm only a 4gpu miner but when i have almost $2 just sitting there.. i know i'll see it eventually
just like everything else here at MPH, i know it takes time sometimes, but even just some msg on the site somewhere sayin  hey we know n w are lookin into it would be nice...

At Bittrex Inactive since May 18, one month.

I had a few dollars of BTG at MPH, sent it to HitBTC, then to something else to my exchange.

Here is my config.txt for MPM for the MPH section so it doesn't mine BTG.

Code:

{
  "Pools": {
    "MiningPoolHub": {
      "User": "$UserName",
      "Worker": "$WorkerName",
      "API_ID": "$API_ID",
      "API_Key": "$API_Key",
	  "ExcludeCoin": ["Bitcoin-Gold"]
    },
    "MiningPoolHubCoins": {
      "User": "$UserName",
      "Worker": "$WorkerName",
      "API_ID": "$API_ID",
      "API_Key": "$API_Key",
	  "ExcludeCoin": ["Bitcoin-Gold"]
    },