Execoin: | First Open-Source Stealth Wallet Released! | Fast | ASIC-proof

[gsupp]

any rejected ?
see R: number, should be lesser than A: if all good

also HW: should be 0

A is fine, R 0 but HW has numbers.

Screenie: https://i.imgur.com/gRIkeC1.jpg?1


Dumbass .. had intensity too high, hardware errors down, lets eee

I'm not familiar with those cards but yeah, HW errors was way too high. Better now?

[gsupp]

vps4.me has started to accept EXE for payments!

vps4.me is a VPS provider with responsive support team.

http://vps4.me/

well we go. Publish all new on the site http://execoin.net/ in the news, please

Just noticed a list of merchants accepting EXE has been posted in the news section of http://execoin.net

[jjc6676]

The forum now has Running polls that I will be adding questions too.Let me know if there are questions you want me to add.

http://forum.execoin.us/?page_id=6767

[bitcoinwonders010]

is it not possible to change exe to POS

[suppersz]

is it not possible to change exe to POS

Change max Coins to 10 million then POS?

[gsupp]

is it not possible to change exe to POS

Change max Coins to 10 million then POS?

A few pages back there was a discussion about lowering the total number of coins and/or block reward. The general consensus from the community and decision by the devs was to leave it as is. A hard fork to reduce rewards could cause more problems than it solves.

[Doom4535]

Here is what I have for another network, It does not work at the moment.

execoin2=math.Object(
        PARENT=networks.nets['execoin'],
        SHARE_PERIOD=22, # seconds
        CHAIN_LENGTH=24*60*60//10, # shares
        REAL_CHAIN_LENGTH=24*60*60//10, # shares
        TARGET_LOOKBEHIND=200, # shares
        SPREAD=55, # blocks
        IDENTIFIER='657865636f696e65'.decode('hex'),
        PREFIX='65657865636f696e'.decode('hex'),
        P2P_PORT=25000,
        MIN_TARGET=4,
        MAX_TARGET=2**256//2**20 - 1,
        PERSIST=True,
        WORKER_PORT=9173,
        BOOTSTRAP_ADDRS='216.249.119.195'.split(' '),
        ANNOUNCE_CHANNEL='#p2pool-exe2',
        VERSION_CHECK=lambda v: True,
    ),

I changed the P2P_port to 25000 (from 9986) the share_period to 22 (from 10) and the spread to 55 (from 50) and the announce channel to p2pool-exe2 (from p2pool-exe).  I did not change the Identifier and Prefix (not sure what to change them to), although I do believe they may need to be changed.  I am having issues establishing a connection between two nodes (two vm's).  Any ideas?

[t-minus]

I have a ton of recieved transactions with EXE coin. but now that I want to spend, they dont confirm, not too sure what is going on.

[suppersz]

is it not possible to change exe to POS

Change max Coins to 10 million then POS?

A few pages back there was a discussion about lowering the total number of coins and/or block reward. The general consensus from the community and decision by the devs was to leave it as is. A hard fork to reduce rewards could cause more problems than it solves.

VTC monopolized the s-n market,EXE doesn't have enough highlights,change to POS or change Algorithm maybe a highlight.

[gsupp]

I have a ton of recieved transactions with EXE coin. but now that I want to spend, they dont confirm, not too sure what is going on.

Do you have a transaction ID? I've spent EXE several times and never had a problem.

[Marco1d87]

 wish people would stop selling EXE so cheap on Poloniex. It's almost like the price is intentionally kept down.

[gsupp]

wish people would stop selling EXE so cheap on Poloniex. It's almost like the price is intentionally kept down.

I feel like someone has said that before... 

[suppersz]

wish people would stop selling EXE so cheap on Poloniex. It's almost like the price is intentionally kept down.

Lack of confidence in EXE,result in lack of buy walls.
EXE need more highlights.

[EtBIM]

Scrypt-N PoW is just fine, and may gain in popularity with the 90 MH/s scrypt ASICs deliverings this month.
If Vertcoin was to go up in price, Execoin should follow the trend.

[gsupp]

Scrypt-N PoW is just fine, and may gain in popularity with the 90 MH/s scrypt ASICs deliverings this month.
If Vertcoin was to go up in price, Execoin should follow the trend.

Yep, I believe we have about 2 weeks until large Scrypt ASICs deliver. Many are promising delivery starting on May 26th, 2014 (GAW Miners / eBay listings) to May 28th (ZoomHash) to May 31st (ZeusMiner).

Some are even already in hand:

http://www.ebay.com/itm/Gridseed-85MHs-A2-Terminator-LTC-Mining-Rig-Machine-SCRYPT-28nm-ASIC-BTC-Miner-/181404725675

[ozie]

Here is what I have for another network, It does not work at the moment.

execoin2=math.Object(
        PARENT=networks.nets['execoin'],
        SHARE_PERIOD=22, # seconds
        CHAIN_LENGTH=24*60*60//10, # shares
        REAL_CHAIN_LENGTH=24*60*60//10, # shares
        TARGET_LOOKBEHIND=200, # shares
        SPREAD=55, # blocks
        IDENTIFIER='657865636f696e65'.decode('hex'),
        PREFIX='65657865636f696e'.decode('hex'),
        P2P_PORT=25000,
        MIN_TARGET=4,
        MAX_TARGET=2**256//2**20 - 1,
        PERSIST=True,
        WORKER_PORT=9173,
        BOOTSTRAP_ADDRS='216.249.119.195'.split(' '),
        ANNOUNCE_CHANNEL='#p2pool-exe2',
        VERSION_CHECK=lambda v: True,
    ),

I changed the P2P_port to 25000 (from 9986) the share_period to 22 (from 10) and the spread to 55 (from 50) and the announce channel to p2pool-exe2 (from p2pool-exe).  I did not change the Identifier and Prefix (not sure what to change them to), although I do believe they may need to be changed.  I am having issues establishing a connection between two nodes (two vm's).  Any ideas?

Change the last 6 digits of IDENTIFIER and PREFIX randomly with hex values between 0-9 and a-f.

Then change the BOOTSTRAP_ADDRS to the IP Address one of your VMs has.

[t-minus]

I have a ton of recieved transactions with EXE coin. but now that I want to spend, they dont confirm, not too sure what is going on.

Do you have a transaction ID? I've spent EXE several times and never had a problem.

yes I do, also take a look at this image of my wallet. http://puu.sh/8InTn.png

Transaction ID: 47103b0f687c49d5bde7cee7d52cd923285daa8a8a40338c438457ba6f855da3

[Liza Abonales343]

can someone tell me the where to get or what is the current difficulty on execoin please

[gsupp]

I have a ton of recieved transactions with EXE coin. but now that I want to spend, they dont confirm, not too sure what is going on.

Do you have a transaction ID? I've spent EXE several times and never had a problem.

yes I do, also take a look at this image of my wallet. http://puu.sh/8InTn.png

Transaction ID: 47103b0f687c49d5bde7cee7d52cd923285daa8a8a40338c438457ba6f855da3

That txid doesn't seem to bring anything up in the block explorer. Perhaps the transaction didn't make it to the network. Have you tried closing and re-opening the Execoin wallet? Do you know if the transaction was sent with a tx fee?

[Doom4535]

Here is what I have for another network, It does not work at the moment.

execoin2=math.Object(
        PARENT=networks.nets['execoin'],
        SHARE_PERIOD=22, # seconds
        CHAIN_LENGTH=24*60*60//10, # shares
        REAL_CHAIN_LENGTH=24*60*60//10, # shares
        TARGET_LOOKBEHIND=200, # shares
        SPREAD=55, # blocks
        IDENTIFIER='657865636f696e65'.decode('hex'),
        PREFIX='65657865636f696e'.decode('hex'),
        P2P_PORT=25000,
        MIN_TARGET=4,
        MAX_TARGET=2**256//2**20 - 1,
        PERSIST=True,
        WORKER_PORT=9173,
        BOOTSTRAP_ADDRS='216.249.119.195'.split(' '),
        ANNOUNCE_CHANNEL='#p2pool-exe2',
        VERSION_CHECK=lambda v: True,
    ),

I changed the P2P_port to 25000 (from 9986) the share_period to 22 (from 10) and the spread to 55 (from 50) and the announce channel to p2pool-exe2 (from p2pool-exe).  I did not change the Identifier and Prefix (not sure what to change them to), although I do believe they may need to be changed.  I am having issues establishing a connection between two nodes (two vm's).  Any ideas?

Change the last 6 digits of IDENTIFIER and PREFIX randomly with hex values between 0-9 and a-f.

Then change the BOOTSTRAP_ADDRS to the IP Address one of your VMs has.

Still doesn't seem to work, gets stuck trying to download shares (both systems display a that they are connected to a peer in the console but the gui has the connections as blank)...