[GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher

[slashka]

Oh, holy hell!  Would you part them out?  How much for the lot?  Shipping to 05443?

+1! how much for 10, 30 and 50? + shipping ti Russia

[miaviator]

Oh, holy hell!  Would you part them out?  How much for the lot?  Shipping to 05443?

You are 4 hours away by car we could meet in the middle.

You want GPU's Motherboards, cases, everything?

Or just gridseeds, cables, PSU's, chassis?

[wolfey2014]

I've been considering selling off my 24 Professionally OverClocked GridSeed 5 chippers. They've hashed faithfully 24/7 for months and months!
They all run stably at 1150MHz producing close to 500KH/s each. I've overclocked hundreds of these for customers over time.
I see others selling them on eBay for $12 to $30 each on average. Some being offered for twice that much which I find rather ridiculous!
Some offer free shipping, some don't. If they sell for a low price, they make up for it in the shipping price. What a racket! Eh?
I might throw in a 1050W psu I don't use anymore which will more than cover the groups' power requirements.
I will also include the USB Hubs with wall warts and 3 foot USB cables as well as custom made power cable sets.
Say all 24 units in working condition for $675 plus shipping. $600 for pods, $75 for the psu. Payment in U$D only. Will ship overseas but you pick up the shipping, terrifs, taxes, fees, bribes etc.
I have 2 blown units also if you want them but I might keep them for souvenirs and or paper weights
18 are Aluminum. 6 of them are Gold.
Cooling fans are all rigged for 5V ultra quiet operation. They are so quiet you could sleep in the same room with them. They couldn't even wake your baby up! They really don't even need a fan to cool them if you design your farm right.
I'll even brush them clean of dust!
Let me know.
Wolfey2014

[slashka]

Ok! As the party going on
I'm selling 12 orbs with:

• 10 port hub with power supply and usb cable
• 12 usb cables
• 10 power cables
• 2 power suppliers for ten orbs
• 2 power suppliers for the rest two ones (as notebook power suppliers)
• wii controller

All are with fans and non evrclocked. The price with international shipping is 222$. If you wish RaspberryPi + 8Gb SD + D-Link 7 ports USB HUB then +70$.

[CartmanSPC]

Anyone want to donate 8 gridseeds so I can fill up my rack (just got another 10 port hub):



I'll pay for shipping!

[wolfey2014]

Heh! You can BUY mine for just $24.95 and that includes shipping!
http://www.ebay.com/itm/GridSeed-5-Chip-Ultra-Quiet-Volt-Moded-500KH-s-Miner-with-Power-Plug-USB-Cable-/321787758343?ssPageName=ADME:X:AAQ:US:1123

[unamis76]

Anyone want to donate 8 gridseeds so I can fill up my rack (just got another 10 port hub):

I'll pay for shipping!

Wouldn't mind a donation myself either haha

[RBCastro]

How do I set up more than 1 COM PORT on .bat file?

I have two gridseeds, my .bat is like that:

Code:

minerd.exe --dual --freq=800 --gc3355=COM5,COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

But it is not working

Thanks

[slashka]

How do I set up more than 1 COM PORT on .bat file?

I have two gridseeds, my .bat is like that:

Code:

minerd.exe --dual --freq=800 --gc3355=COM5,COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

But it is not working

Thanks

try this:
minerd.exe --dual --freq=800 --gc3355=COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1
minerd.exe --dual --freq=800 --gc3355=COM5 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

run two processes!

[RBCastro]

How do I set up more than 1 COM PORT on .bat file?

I have two gridseeds, my .bat is like that:

Code:

minerd.exe --dual --freq=800 --gc3355=COM5,COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

But it is not working

Thanks

try this:
minerd.exe --dual --freq=800 --gc3355=COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1
minerd.exe --dual --freq=800 --gc3355=COM5 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

run two processes!

Great, now it worked to mine LTC, but when I use it in dual mode, one of the gridseed stays with "A: 0"

See the print:

[slashka]

I never tried to mine in dual mode. Read FAQ in this topic. It will help you. Besides, you could try to use alternative software (bfgminer, e.g.).

[chup]

Great, now it worked to mine LTC, but when I use it in dual mode, one of the gridseed stays with "A: 0"

See the print:

800 is quite high frequency for dual mode. I don't think You can be successful in dual mode with frequencies higher than 650. You can expect 60W power draw in dual mode for each gridseed.

[tolazy]

is my GSD 5-chip broken ??

tried both LTC and BTC and tried all that i can download of software but still the same. NO SHARES

0: GSD 8D7F318D5753:  600 MHz  SHA256        | 11.58G / 10.55Gh/s WU:0.0/m
--------------------------------------------------------------------------------
 [2015-10-01 17:48:01] Started cgminer 4.3.5-scrypt.2
 [2015-10-01 17:48:02] GridSeed options: 'baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16'
 [2015-10-01 17:48:02] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID 8D7F318D5753
 [2015-10-01 17:48:02] GSD0: System reseting
 [2015-10-01 17:48:03] GSD0: Set GC3355 core frequency to 600 MHz
 [2015-10-01 17:48:03] Create scrypt proxy on 3350/UDP for GSD0
 [2015-10-01 17:48:03] GridSeed GSD0 opened on usb:4:76
 [2015-10-01 17:48:03] Probing for an alive pool
 [2015-10-01 17:48:04] Pool 0 difficulty changed to 1024
 [2015-10-01 17:48:04] Network diff set to 335M
 [2015-10-01 17:48:17] Stratum from pool 0 requested work restart
 [2015-10-01 17:51:03] Pool 0 difficulty changed to 512
 [2015-10-01 17:54:03] Pool 0 difficulty changed to 256
 [2015-10-01 17:55:03] Stratum connection to pool 0 interrupted
 [2015-10-01 17:55:04] Pool 0 difficulty changed to 128
 [2015-10-01 17:57:25] Pool 0 difficulty changed to 1024
 [2015-10-01 17:58:04] Pool 0 difficulty changed to 512
 [2015-10-01 17:59:36] Network diff set to 336M
 [2015-10-01 17:59:36] Stratum from pool 0 detected new block

[lucbad]

Hi!

I need help for the problem "H-not-zero"


bfgminer version 5.3.0 - Started: [2015-10-01 18:06:31] - [  0 days 00:26:04]
[M]anage devices [P]ool management [ S ]ettings [D]isplay options  [H]elp [Q]uit
Pool 0: ...ning.eligius.st  Diff:7m  +Strtm  LU:[18:32:13]  User:1Jmyac1sCydvRj
Block #377025: ...3d52dbb0  Diff:60.8G(435.3P) Started:[18:26:06] I: 0.00 BTC/h
ST:7  F:0  NB:4  AS:0  BW:[ 83/  4 B/s]  E:0.00  BS:265m
0            | 334.5/362.3/  0.0kh/s | A:0 R:20+0(100%) HW:0/none
-------------------------------------------------------------------------------
GSD 0:       | 364.3/363.7/  0.0kh/s | A:0 R:20+0(100%) HW:0/none
-------------------------------------------------------------------------------
[2015-10-01 18:19:10] Rejected 0003c4ca GSD 0d Diff 265m/7m (H-not-zero)
[2015-10-01 18:21:01] Rejected 003c6bab GSD 0b Diff 16m/7m (H-not-zero)
[2015-10-01 18:21:19] Stratum from pool 0 detected new block
[2015-10-01 18:22:37] Rejected 003d7aad GSD 0d Diff 16m/7m (H-not-zero)
[2015-10-01 18:22:58] Rejected 0046368f GSD 0b Diff 14m/7m (H-not-zero)
[2015-10-01 18:23:03] Rejected 00376f20 GSD 0b Diff 18m/7m (H-not-zero)
[2015-10-01 18:23:12] Rejected 0042e13c GSD 0d Diff 14m/7m (H-not-zero)
[2015-10-01 18:25:32] Rejected 00799c70 GSD 0a Diff 8m/7m (H-not-zero)
[2015-10-01 18:25:47] Rejected 005681fd GSD 0c Diff 11m/7m (H-not-zero)
[2015-10-01 18:26:06] Stratum from pool 0 detected new block
[2015-10-01 18:26:09] Rejected 005fec50 GSD 0d Diff 10m/7m (H-not-zero)
[2015-10-01 18:26:18] Rejected 0068acd0 GSD 0e Diff 9m/7m (H-not-zero)
[2015-10-01 18:26:23] Rejected 0040bb98 GSD 0b Diff 15m/7m (H-not-zero)
[2015-10-01 18:27:14] Rejected 00423439 GSD 0e Diff 15m/7m (H-not-zero)
[2015-10-01 18:27:56] Rejected 00463d5f GSD 0d Diff 14m/7m (H-not-zero)
[2015-10-01 18:31:37] Rejected 000a519c GSD 0e Diff 96m/7m (H-not-zero)

Thanks

[vinautomatic]

Sorry to bump an old thread, but does anyone still have any gridseeds for sale? Shipping to Florida

[BRADLEYPLOOF]

Hi!

I need help for the problem "H-not-zero"


bfgminer version 5.3.0 - Started: [2015-10-01 18:06:31] - [  0 days 00:26:04]
[M]anage devices [P]ool management [ S ]ettings [D]isplay options  [H]elp [Q]uit
Pool 0: ...ning.eligius.st  Diff:7m  +Strtm  LU:[18:32:13]  User:1Jmyac1sCydvRj
Block #377025: ...3d52dbb0  Diff:60.8G(435.3P) Started:[18:26:06] I: 0.00 BTC/h
ST:7  F:0  NB:4  AS:0  BW:[ 83/  4 B/s]  E:0.00  BS:265m
0            | 334.5/362.3/  0.0kh/s | A:0 R:20+0(100%) HW:0/none
-------------------------------------------------------------------------------
GSD 0:       | 364.3/363.7/  0.0kh/s | A:0 R:20+0(100%) HW:0/none
-------------------------------------------------------------------------------
[2015-10-01 18:19:10] Rejected 0003c4ca GSD 0d Diff 265m/7m (H-not-zero)
[2015-10-01 18:21:01] Rejected 003c6bab GSD 0b Diff 16m/7m (H-not-zero)
[2015-10-01 18:21:19] Stratum from pool 0 detected new block
[2015-10-01 18:22:37] Rejected 003d7aad GSD 0d Diff 16m/7m (H-not-zero)
[2015-10-01 18:22:58] Rejected 0046368f GSD 0b Diff 14m/7m (H-not-zero)
[2015-10-01 18:23:03] Rejected 00376f20 GSD 0b Diff 18m/7m (H-not-zero)
[2015-10-01 18:23:12] Rejected 0042e13c GSD 0d Diff 14m/7m (H-not-zero)
[2015-10-01 18:25:32] Rejected 00799c70 GSD 0a Diff 8m/7m (H-not-zero)
[2015-10-01 18:25:47] Rejected 005681fd GSD 0c Diff 11m/7m (H-not-zero)
[2015-10-01 18:26:06] Stratum from pool 0 detected new block
[2015-10-01 18:26:09] Rejected 005fec50 GSD 0d Diff 10m/7m (H-not-zero)
[2015-10-01 18:26:18] Rejected 0068acd0 GSD 0e Diff 9m/7m (H-not-zero)
[2015-10-01 18:26:23] Rejected 0040bb98 GSD 0b Diff 15m/7m (H-not-zero)
[2015-10-01 18:27:14] Rejected 00423439 GSD 0e Diff 15m/7m (H-not-zero)
[2015-10-01 18:27:56] Rejected 00463d5f GSD 0d Diff 14m/7m (H-not-zero)
[2015-10-01 18:31:37] Rejected 000a519c GSD 0e Diff 96m/7m (H-not-zero)

Thanks

Looks like you're trying to mine SHA256 Algo, but you're submitting scrypt work...  Get the newest BFGMiner and make sure when you start the program, you're mining the right algorithm that you've selected...so Bitcoin = SHA256 (no callout when starting the program) and if you're mining a scrypt based coin, make sure to use --scrypt in the batch file, or your linux command line, or however you happen to be running this.

[Funroll_upz]

I am looking for Sandor111's  cpuminer minerd, the file is titled "minerd-gc3355.zip" and used to be linked to here: https://www.dropbox.com/s/ttqa9p851siz8oi/minerd-gc3355.zip

But that link is broken. I am also PM'ing sandor.  Thanks in advance.

[QuintLeo]

I never used that one, but the download link for the Gridseed CGMiner version still works in the first post on http://cryptomining-blog.com/?s=gridseed+80

[jw_industry]

Has anyone tried mining stratis with a raspberry pi?

[ab1jx]

Sorry to bump an old thread, but does anyone still have any gridseeds for sale? Shipping to Florida

Try Aliexpress.com, search for Gridseed.  Just got one, hope to do it again in a couple more weeks.  Really, I got what is supposedly a used G-blade for $62 including shipping.  Got it in about a week.  Everything tells me it's from 2014 but it doesn't look used, might be new old stock.  Very happy with it so far, glad I didn't get some newer smaller stick miner.  Without pushing it hard it's been doing 4,496 kH/s for maybe 18 hours so far, running at 700 MHz.