[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[Rickirs]

Got 1 AMD  RX 6600 , hence tried TeamRedMiner as other miners refused to work.
Now, I need to know can TRM do :
1. Stop showing "new job" line ?
2. Set OC settings for GPU (Linux) ?

[deedeeranged]

Got 1 AMD  RX 6600 , hence tried TeamRedMiner as other miners refused to work.
Now, I need to know can TRM do :
1. Stop showing "new job" line ?
2. Set OC settings for GPU (Linux) ?

I am running Ubuntu 20.04.2/3 with latest amdgpu-pro-driver with a RX 6600 XT and it runs fine with gminer and phoenixminer and
I canset OC on phoenixminer but make sure you read all the readme's as for RX 6xxx (XT) cards you might have to set relative values.

[Rickirs]

I am running Ubuntu 20.04.2/3 with latest amdgpu-pro-driver with a RX 6600 XT and it runs fine with gminer and phoenixminer and
I canset OC on phoenixminer but make sure you read all the readme's as for RX 6xxx (XT) cards you might have to set relative values.

Is it on Riser or on PCIx16 ?

[deedeeranged]

I am running Ubuntu 20.04.2/3 with latest amdgpu-pro-driver with a RX 6600 XT and it runs fine with gminer and phoenixminer and
I canset OC on phoenixminer but make sure you read all the readme's as for RX 6xxx (XT) cards you might have to set relative values.

Is it on Riser or on PCIx16 ?

On MSI B550-A Pro pcie slots no risers.

[heavyarms1912]

0.8.6 works with the latest drivers for VII and XT series.
Very good speeds 62MH 6800XT and 86.5MH+ on VII with no memory timing changes.
Able to still use 6800XT as main display watching videos and even some games no issue.

I assume there may be a way to squeeze more out of 6xxx series in the future? Since smaller chips but uses about the same watts as the R7 but with less hash?
This isn't a problem of TRM as all software does this that I have tried.

Thanks for your work!

6800 series are more or less at peak of what they can do unless memory timing mod becomes a thing.
You should really be on linux with that VII to get 100 MHs

[fmz89]

With new change on ergo mining, makes my vegas worthless compared eth mining before

And forcing gaining coreclock doesnt worth to try, gpu temp already reach stable maximum for long term running, so i'm back mining eth again and compete with nvidia&asic mining, sadly 

[Cryptomining2003]

I have an issue with the amount of RAM allocated. I used TRM miner with the following command:

eth_big_mode_adjust=64

after I changed my mainboard, this value 64 wont work anymore. it sais that it cant allocate that much ram, it allocates around 7900 MB of memory. I have a AMD 5700 and was able to allocate all but 64 MB of video ram, but after I switched my mainboard, there needs to be around 256 MB of free memory that cant be allocated by TRM.

Must be the mainboard / bios...I searched all values but didnt find anything that I can change for Vram reservation. any idea? costs a lot of mhash

[JaniBaram]

Hi guys!! Few last days I have issue!

[2021-12-04 16:16:10] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:12] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:13] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:14] Dev pool failed to connect.
[2021-12-04 16:16:14] Mining will proceed at reduced rate while not connected to dev pool.


Can you please look into this!!? I have problems thanks!

[Rickirs]

Hi guys!! Few last days I have issue!

[2021-12-04 16:16:10] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:12] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:13] Pool eu1.ethermine.org received new job.
[2021-12-04 16:16:14] Dev pool failed to connect.
[2021-12-04 16:16:14] Mining will proceed at reduced rate while not connected to dev pool.


Can you please look into this!!? I have problems thanks!

Obviously you need to first check if you can connect to eu1.ethermine.org , trying a ping may help or a test connection using your own address said pool might  help to verify. If it fails then fix that first.

[v1tru]

hi, I've updated miner from 8.6 to 9 but now Windows 11 antimalware detects Program:Win32/Beareuws.A!ml dangerous app,
which interest the miner path. Somebody with same problem?

[buraz11]

there is no 9 yet, you downloaded a malware delete it

[miner29]

there is no 9 yet, you downloaded a malware delete it

Go to OP First post and see there is in fact both a linux and windows 9.0 on thier github.

[GKumaran]

hi, I've updated miner from 8.6 to 9 but now Windows 11 antimalware detects Program:Win32/Beareuws.A!ml dangerous app,
which interest the miner path. Somebody with same problem?

https://github.com/todxx/teamredminer/releases/tag/v0.9.0

TRM 0.9.0 was released with support for FPGA - Eth mining.
It could be that the new code for FPGA triggers the warning.

If you download from official sources, then it should be fine for whitlelisting the exe.

[Cryptomining2003]

there is no 9 yet, you downloaded a malware delete it

what a qualified contribution 

[Rickirs]

I request devs to please add "option" to remove "NEW JOB RECEIVED" notification , it would be lot nicer and cleaner.

[ironmanred]

I have couple question regarding using the TRM.

OS - Windows 10
AMD Driver version - 21.3.2
Mobo - Asrock BTC Pro v2.0
GPU - RX5700XT from different vendors
TRM version - 0.9.0

Some background here. I have 6 GPUs. If I only use 5 I can set the primary display using IGP on the mobo (in BIOS). But if I use 6 GPUs, the mobo wont post if I try to use IGP as primary display. So I am forced to use 5700XT for primary display when using 6 GPUs.

If I don't connect a display or dummy HDMI dongle, when I start TRM, the GPU 0, used as primary display, shows very low hashrate like below.

GPU  0 [33C, fan 43%]      ethash: 1.115Mh/s, avg 1.032Mh/s, pool 0.000 h/s a:0 r:0 hw:0

Once I connect a display or use HDMI dongle, the GPU will start working but with two caveats. Is monitor or HDMI dongle required?  

1) Its hashrate is slightly lower than other GPUs - 56.2Mh (Primary GPU) vs 56.8Mh (Other GPU) in my case. Is this the correct behavior?
2) By default, TRM allocates 7GB vram for GPU 0. If I tried to allocate more vram using command option, the GPU 0 will be detected as dead soon after I start mining. This is correct behavior also?

[abrgeza]

it would be nice if we can dual mining eth/etc + TON with TRM

[Dojo76]

Agreed ETH+TON on TRM would be great.  Anyone know if that's on the horizon?

Dual mining with TON implemented in latest version 0.92 but not working for me with pool.services.tonwhales.com. I tried this string:

--ton -o stratum+tcp://pool.services.tonwhales.com:443 -u <ton wallet>.<worker name> -p x --ton_end

Also tried to specify the dialect with "--ton_pool_mode=toncoinpool"

[sxemini]

Agreed ETH+TON on TRM would be great.  Anyone know if that's on the horizon?

Dual mining with TON implemented in latest version 0.92 but not working for me with pool.services.tonwhales.com. I tried this string:

--ton -o stratum+tcp://pool.services.tonwhales.com:443 -u <ton wallet>.<worker name> -p x --ton_end

Also tried to specify the dialect with "--ton_pool_mode=toncoinpool"

Where you find this url stratum+tcp://pool.services.tonwhales.com:443 for the pool connection?
The connection is https://server1.whalestonpool.com or i am wrong?

EDIT:

https://pool.services.tonwhales.com

Teamredminer only supports 2 pools at the moment - stratum+tcp://ton.hashrate.to:4002 and stratum+tcp://pplns.toncoinpool.io:443/stratum


Test with my 6900xt - 61mh on ETH and 5gh/s on TON | lolminer - ETH 61mh and 3,75gh/s on TON

[Dojo76]

Agreed ETH+TON on TRM would be great.  Anyone know if that's on the horizon?

Dual mining with TON implemented in latest version 0.92 but not working for me with pool.services.tonwhales.com. I tried this string:

--ton -o stratum+tcp://pool.services.tonwhales.com:443 -u <ton wallet>.<worker name> -p x --ton_end

Also tried to specify the dialect with "--ton_pool_mode=toncoinpool"

Where you find this url stratum+tcp://pool.services.tonwhales.com:443 for the pool connection?
The connection is https://server1.whalestonpool.com or i am wrong?

EDIT:

https://pool.services.tonwhales.com

Teamredminer only supports 2 pools at the moment - stratum+tcp://ton.hashrate.to:4002 and stratum+tcp://pplns.toncoinpool.io:443/stratum


Test with my 6900xt - 61mh on ETH and 5gh/s on TON | lolminer - ETH 61mh and 3,75gh/s on TON

Yep, unsupported pool at the moment, working with ton.hashrate.to:4002.

I suppose I'll be paid by the pool on the TON wallet when payout is reached for ETH but not 100% sure