[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[E]

R Mode memory allocation question on Instinct MI25 and MI60. Is the memory allocation acting as expected, leaving ~10 / 26GiB free on the MI25s and MI60?

TRM 0.9.4.7
Linux 5.10.0-hiveos #83.hiveos.211201 SMP Wed Dec 1 11:51:04 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
AMD Driver 20.40 (5.11.1001)

0 04:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
1 08:00.0 Radeon Pro V320 16368 MB · 113-D0515300-101
2 0c:00.0 Radeon Pro VII 32752 MB · 113-D1630600-107

Code:

Team Red Miner version 0.9.4.7
[2022-05-13 21:16:27] Linux kernel vm mode parameters are already correct.
[2022-05-13 21:16:27] Auto-detected AMD OpenCL platform 0
[2022-05-13 21:16:28] Initializing GPU 0.
[2022-05-13 21:16:28] Initializing GPU 1.
[2022-05-13 21:16:28] Initializing GPU 2.
[2022-05-13 21:16:28] GPU 0 Vega boost applied.
[2022-05-13 21:16:28] GPU 0 Starting tuning.
[2022-05-13 21:16:28] GPU 1 Vega boost applied.
[2022-05-13 21:16:28] GPU 1 Starting tuning.
[2022-05-13 21:16:28] GPU 2 Radeon VII boost applied.
[2022-05-13 21:16:28] GPU 2 Starting tuning.
[2022-05-13 21:16:28] Successfully initialized GPU 0: Vega with 64 CU (PCIe 04:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 1: Vega with 64 CU (PCIe 08:00.0)
[2022-05-13 21:16:28] Successfully initialized GPU 2: Vega2 with 64 CU (PCIe 0c:00.0)
...
[2022-05-13 21:16:33] GPU 0 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 2 DAG allocation trying 32752.0 - 26096.0 = 6656.0 MiB.
[2022-05-13 21:16:33] GPU 1 DAG allocation trying 16368.0 - 9712.0 = 6656.0 MiB.
...
[2022-05-13 21:16:36] GPU 0 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 1 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:37] GPU 2 Starting DAG generation for epoch 492, 4.84 GB (single buffer mode).
[2022-05-13 21:16:41] GPU 2 DAG generation finished in 3.498 seconds.
[2022-05-13 21:16:41] GPU 0 DAG generation finished in 5.149 seconds.
[2022-05-13 21:16:42] GPU 1 DAG generation finished in 5.150 seconds.

Thanks for trm!

[ivanpop]

Is there an option to lower mining intensity of a gpu if it reaches a certain temperature?
I remember that claymore had the -ttli option and if you set it to -ttli 75 if that card reaches 75 degrees it starts mining slower.

[Viaggiatore]

Hello, I'm testing this miner, pretty interested in very good 5700 XT support.
I have a problem with CM api, I'm configuring it like this:

--cm_api_listen=0.0.0.0:1501

But as soon as I try to connect to the API I get this error:

CM API failed to parse rpc: GET / HTTP/1.1

Any hint?
Thanks

EDIT: it seems there is a problem with the latest 0.9.4.7, tried 0.9.4.2 and it is working fine
EDIT #2: tried again 0.9.4.7 and CM API is now working fine, I guess I made something wrong in the beginning

[FP91G]

teamredminer v0.9.4.7

"We've chosen to release v0.9.4.7 and the previous v0.9.4.6 as public betas to gather more user feedback without triggering automatic updates in mining distros. With the v0.9.4.7 release, we believe we've solved the issue with some Navi gpus simply not responding well to R-mode, rather dropping to e.g. 48-50 MH/s instead of expected 55-56 MH/s for a 5700/5700XT. We're expecting to push this version in a proper public release shortly unless we hear about any additional issues. If you don't use the new R-mode, or you're a Windows miner, you still have an upside running this new version for the "smooth power" rewrite described below."
https://github.com/todxx/teamredminer#teamredminer-v0947

[cc-louhos]

Is it possible to define Power Limit from command line when using TRM? 

I'm running TRM 0.9.4.7 in Windows 10.
Trying to find optimal settings for Gigabyte Vega 56, with Hynix. 

Many miners allow power limit setting from command line. Is it possible in TRM?

[FP91G]

Is it possible to define Power Limit from command line when using TRM?  

I'm running TRM 0.9.4.7 in Windows 10.
Trying to find optimal settings for Gigabyte Vega 56, with Hynix.  

Many miners allow power limit setting from command line. Is it possible in TRM?

For Vega 56 use Team Red Miner v0.10.0
README highlights:
GPU: R-mode introduced. See separate documentation. Applicable for Vegas/VIIs/Navi10/Big Navi.
GPU: Smooth power transitions for ethash family algos.
https://github.com/todxx/teamredminer/releases/tag/v0.10.0

[livada]

Windows: Linux: https://dl.teamredminer.com/beta/teamredminer-v0.9.4.6-win.zip

Link dont work

[2FastMiner]

Is there a resource for R mode?  I'd like to see if I can squeeze out any more hashrate or reduce my wattage.   I have Radeon VIIs, 6800s, 6700xt 6600xt.

[ivanpop]

Is there a resource for R mode?  I'd like to see if I can squeeze out any more hashrate or reduce my wattage.   I have Radeon VIIs, 6800s, 6700xt 6600xt.

Of course there is. There is literally an ethash_tuning_guide_rmode file inside the teamredminer folder.

[fenomenyaa]

when will R mode ready for Windows?

[nik-qz]

the new version 0.10 seems to work well with 5800/6800/580, but the video cards began to fall off periodically, I think due to the fact that the consumption has changed and the fine-tuning of the power consumption has become ineffective and you need to slightly change the voltage upwards

[Dojo76]

the new version 0.10 seems to work well with 5800/6800/580, but the video cards began to fall off periodically, I think due to the fact that the consumption has changed and the fine-tuning of the power consumption has become ineffective and you need to slightly change the voltage upwards

I tested all versions and the stable 0.10 produces some rejected shares on a couple of 6700 XT cards by Sapphire that have an higher factory clock compared to others but outside of that very small issue it's a very solid release to start the new branch. Still looking for a way to improve RX 6600 XT power compsumpion but seems like a OS overclock issue because under 900 Mhz core settings are not accepted (1400 is applied as fail safe, at least in Hive)

I downvolted basically all cores in my case and saved a few watts, runs very stable but you need AMD drivers 21.50.2 or 22.10.2 (faster) to improve stability and performance, if you upgrade the drivers you'll have more stability and shares.

[Dowper_]

My newest video:
RX 5700 - Testing R-mode TeamRedMiner - https://youtu.be/fmRjEje7boo

[DrX]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

[MegaVlad]

Do RX580s (in A-Mode) work in the same rig on TeamRedMiner 0.10.0 together with RX6800s (in R-Mode) in Rave OS?

[sxemini]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

[BogdanCo]

Hello

Using the new TRM 0.10, I have quite frequently this error:

Code:

:0:rocdevice.cpp            :2603: 0666232413 us: 11014: [tid:0x7fcb738d9700] Device::callbackQueue aborting with error : HSA_STATUS_ERROR_MEMORY_FAULT: Agent attempted to access an inaccessible address. code: 0x2b
[2022-06-02 16:54:42] Watchdog script executor thread exiting.
/root/xminer.sh: line 195: 11009 Aborted                 ${minerSudo} /root/miner/${MINER_PKG_NAME}/${MINER_FILE} ${MINER_OPTIONS_GO}

I don't know what can be, because it's not only on one rig....

[psiz]

In version 0.10 , my RX480 keeps crashing, totally random with cards.
In version 0.9.4.2, my RX480 works well months.

[DrX]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Usually, but not worth the fight for couple eurocents.

[sxemini]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Usually, but not worth the fight for couple eurocents.

Not worth? When you have 200 GPU´s running than it is worth enough. TRM stable in all ways, R Mode no problem, some old polaris rigs save 20w and gained 2mh - nice optimization for this old cards.

Compared to lolminer the difference per 6 card polaris rig is over 60w less power and 3 - 4% more hashrate, for me, this is huge.