[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[Did7N]

Hello.
I got an error in the miner "Dev pool failed to connect. Mining will proceed at reduced rate while not connected to dev pool.".
There are no problems with the Internet.
Help me please.

[todxx]

Team Red Miner v0.10.10 released!

https://github.com/todxx/teamredminer/releases

This release primarily adds support for Ironfish using the stratum protocol proposed by TRM, which enables miners to run at a much higher hashrate than previously.

Confirmed pools with support at this time are Herominers and Flexpool. Other pools are welcome to inspect the forked ironfish on Kerney666's github (trm_stratum branch) to implement support.

README highlights:

• GPU:  Added support for ironfish (-a ironfish, only the fast stratum protocol v2 supported).
• GPU:  Dual mining support for ironfish with ERG and ethash (use --iron ... --iron_end).
• GPU:  Addressed sluggish and lagging display with KAS solo mining (and ironfish).
• GPU:  Added support for the ZIL ZMP protocol. Use zil:// in --zil .. --zil_end or normal pool configs.
• GPU:  Added event script for calling external scripts on e.g. algo switching, see --event_script.
• GPU:  Added support for switching between separate clocks/voltages on windows for zil switching.
• FPGA: Added kaspa support for JC13s and JCC2F carriers.
• FPGA: Added kaspa support for vu13ps on E300 boards.

[zsoca72]

Hello!
I cant mine Etc nor Eth with my Vega64. Trm v0.10.9-win Got message:

[2023-04-20 13:53:18] GPU 1 DAG allocation trying 8176.0 - 512.0 = 7664.0 MiB.
[2023-04-20 13:53:18] GPU 1 ERROR - failed to allocate ethash DAG buffer, tried down to 4088.0MiB.
[2023-04-20 13:53:18] GPU 1 thread exiting with error.

Under Phoenix miner I can mine Eth without problem.

I have enough Virtual memory, 60 GB (PM worked with 40GB, too).
I tried even to disable/enable my Gpu's, but nothing helped.

[FP91G]

Team Red Miner v0.10.11

This is a small update for ironfish mining with slightly better hashrate/efficiency for all gpus but the 7900XT which was broken in the previous release and now does +150-170%. Miners now also have the ability to choose your own graffiti (limited to 20 characters) - if you're the one who finds a block for your pool, you'll get your message on the blockchain!

README highlights:

GPU: Small improvements for ironfish hashrate/efficiency on all gpus.
GPU: Fixed low ironfish hashrate for RDNA3 / 7900XT.
GPU: Automatic handling of ironfish worker name when specified as wallet.worker.
GPU: User can now set their own graffiti prefix (max 20 chars) when mining ironfish (see --iron_user_graffiti) to paint the blockchain!

https://github.com/todxx/teamredminer/releases/tag/v0.10.11
Check all links with this post from the developer.

Ironfish on 6600XT

[FP91G]

Team Red Miner v0.10.13

Added support for Ironfish on FPGAs and HiveOS Navi zil GPU clock switching script.

README highlights:

GPU: Added HiveOS Navi zil switch handler script for mem states, add --use_distro_features to enable.
FPGA: Added support for Ironfish algo, see FPGA_IRONFISH_GUIDE.txt
FPGA: Added new auto error-rate clock adjustment, see --fpga_er_auto and FPGA_IRONFISH_GUIDE.txt
FPGA: Added support for TUL TH53M board
FPGA: Fixed issue with DNAs being read from wrong SLR on vu9p/vu13p boards.


https://github.com/todxx/teamredminer/releases/tag/v0.10.13
Check all links with this post from the developer.

IronFish can now be fished with FPGA

[lijingang]

May I ask whether TeamRedMiner can add the function of mining apepe on GPU, please reply if you see it, thank you

New minable pow coin: apepepow (apepe)
Monroe community meme coin, the first privacy meme coin, Monero developers, no pre-mining, no ICO, fair mining, let apepepow make pepe again
Algorithm: memehash
Web site: https://apepepow.com
Blocks the browser: https://scan.apepepow.com
Mining Pool:: https://ekapool.com/apepe/
bitcointalk:https://bitcointalk.org/index.php?topic=5455236.0
Discord: https://discord.gg/s5ZgwcnGzT
github:https://github.com/APEPEPOW/APEPEPOW
cpuminer-memehash:https://github.com/APEPEPOW/cpuminer-memehash

Hello everyone! I recently discovered a new interesting project (apepepow) that claims to be designed for the Monero (XMR) meme enthusiast community, developed by Monero developers. Is anyone interested in this project or has more information?It's an interesting meme coin for the Monero community. I would like to know what people think about this project?

[Foxy4321]

ERGO+RXD+ZIL ? 

[fenomenyaa]

Pls add dynex 

[qwep1]

Pls add dynex 

+1

[Sergey2015]

tell me please set up dual mining rvn + zil 3 days mined and rvn mined, but no zil, maybe something is not configured correctly here is an example of a batch file
teamredminer.exe -a kawpow -o stratum+tcp://eu.rvn.k1pool.com:7861 -u K.......1.5700 -p x --zil -o stratum+tcp://eu.zil.k1pool.com:1111 -u K.....1.5700  --p x --zil_end --clk_core_mhz=1575 --clk_core_mv=875 --clk_mem_mhz=1780 --clk_mem_mv=1300 --fan_control=:::60
pause

[Dowper_]

My test with TeamRedMiner on PowBlocks:
5x RX 5700 XT - PowBlocks Hashrate & Profit (TRM 0.10.14) - https://www.youtube.com/watch?v=tRvjWUcs0Vg

[kostya.g]

Hi, im using windows 11 and amd drivers v23.12.1 with rx6700xt

i try to set memory clock 1600mhz, but when miner start it stays 1988mhz. Fans have same problem, i set like it says in documentation, but cards ignore this settings. Core clock and power limits works fine.

teamredminer.exe -a kawpow -o stratum+tcp://cn.kawpow.k1pool.com:5100 -u KrbB9.%COMPUTERNAME% -p x --clk_core_mhz=1800,1800,1800,1800,1800,1800,1800,1800 --clk_core_mv=880,880,880,880,880,880,880,880 --clk_mem_mhz=1600,1600,1600,1600,1600,1600,1600,1600 --fan_default_big_navi=55::::20:80 --fan_debug --log_file=%HOMEPATH%\Desktop\logs\trm-%date%.log

[2023-12-17 06:51:09] Mining kawpow with 8 GPU workers
[2023-12-17 06:51:09] GPU PCIe      CUs CoreMHz SocMHz MemMHz TEdge TJct  TMem  FanPct  FanRpm  VDDC   Power  Prog Cfg
[2023-12-17 06:51:09] 0   03:00.0   40  1711               0      1988   72C   81C    0C   23.00%   779    887 mV 139 W  B640
[2023-12-17 06:51:09] 1   06:00.0   40  1715              0      1988   70C   81C    0C   24.00%   810    887 mV 136 W  B640
[2023-12-17 06:51:09] 2   10:00.0   40  1704              0      1990   71C   78C    0C   29.00%   961    887 mV 140 W  B640
[2023-12-17 06:51:09] 3   13:00.0   40  1731              0      1990   72C   77C    0C   23.00%   780    887 mV 137 W  B640
[2023-12-17 06:51:09] 4   16:00.0   40  1736              0      1990   71C   78C    0C   27.00%   899    887 mV 136 W  B640
[2023-12-17 06:51:09] 5   19:00.0   40  1702              0      1988   66C   85C    0C   33.00%  1119    887 mV 142 W  B640
[2023-12-17 06:51:09] 6   22:00.0   40  1707              0      1990   65C   71C    0C   26.00%   871    887 mV 143 W  B640
[2023-12-17 06:51:09] 7   25:00.0   40  1724              0      1990   58C   67C    0C   23.00%   779    887 mV 133 W  B640

i do something wrong?

[OXYGEN_06]

DINT + ZIL not working. can you look?

[fenomenyaa]

Dear DEV,

New coins and new algorithms on town and profiatble., and yourminers amd RDNA3 support is poor, many algo not supported, Are you going to update your miner?I get used to your miner, and perform well. Pls update asap.

[Dowper_]

Dear DEV,

New coins and new algorithms on town and profiatble., and yourminers amd RDNA3 support is poor, many algo not supported, Are you going to update your miner?I get used to your miner, and perform well. Pls update asap.

Yup, definetely the best AMD miner but no recent updates sadly...

[zsoca72]

Hello!
I cant mine Etc nor Eth with my Vega64. Trm v0.10.9-win Got message:

[2023-04-20 13:53:18] GPU 1 DAG allocation trying 8176.0 - 512.0 = 7664.0 MiB.
[2023-04-20 13:53:18] GPU 1 ERROR - failed to allocate ethash DAG buffer, tried down to 4088.0MiB.
[2023-04-20 13:53:18] GPU 1 thread exiting with error.

Under Phoenix miner I can mine Eth without problem.

I have enough Virtual memory, 60 GB (PM worked with 40GB, too).
I tried even to disable/enable my Gpu's, but nothing helped.

I cant mine even Ravencoin anymore.
I have Rx580 8GB, RX5700 and Vega64.
6 VGA in rig, 64GB Virtual memory, but got error message:
"ERROR - failed to allocate ethash DAG buffer". For EVERY type of my VGAs above.
I can mine other coins easily with less, than 4GB Dag.

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???

[safar1980]

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???

Drivers!
If you have old drivers, then update them. I noticed this problem with AMD video cards, when they gave such an error with the amount of information exceeding 4 GB, which needs to be used for the DAG file.

[Dowper_]

Polaris GPUs are finally on profit:
6x RX 580 4GB - AI Power Grid on Profit with TRM - https://www.youtube.com/watch?v=Ep3ntppV3RA

[zsoca72]

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???

Drivers!
If you have old drivers, then update them. I noticed this problem with AMD video cards, when they gave such an error with the amount of information exceeding 4 GB, which needs to be used for the DAG file.

You are right. After my post, I tried to mine ETHW with TRM, which had about 6GB DAG, and it worked fine. I see at DAG generation "dual buffer mode":
GPU 0 Running kernels in dual buffer mode.
GPU 0 Starting DAG generation for epoch 618, 5.83 GB (dual buffer mode).

Kawpow algo run in "single buffer mode". I found command "--eth_dag_buf" to force buffer mode to Dual, but looks like it doesnt work under kawpow algo.

In usage.txt file I found, that older drivers not supported single buffer mode over 4GB. Unfortunately I really use very old driver (19.12.1), because all my cards works perfectly with it.
When I upgraded it to ANY newer, I had always some problems.

Can I somehow forced this Dual buffer mode on Kawpow algo??

[fenomenyaa]

Latest update 5-6months ago, hope that it's not dead project