[ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation

[vlieg]

Hirocoin ?

yes

[ShXnot]

hey guys,
anyone here using hd 7950?

im getting 1.8 m/h with this settings
sgminer.exe -k darkcoin -o stratum+tcp://pool -u user -p password -I 18 -g 4 -w 128

and also with this tweaks
core voltage 1100
core clock 1100
memory clock 1550

is 1.8m/h normal for this card?
thanks

[matauc12]

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

This wil give me still hardware errors with a speed of about 1Mh/s per gpu card.


The other setting:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u HrqxJyeguRvFcGU.1 -p x -I 13 -g 2 -w 400 --lookup-gap 2 --thread-concurrency 8192

also give hardware errors but much much more speed. about 2.2 Mh/s per gpu.

Don't know what i have to change   also don't know what speed is acceptable at the moment.

it seems odd that you get pretty much spot on the mhs but with errors (would usually be much lower or much higher). Do you mind posting a screenshot of sgminer running?

Also, did you add the setx parameters?

Also add --gpu-engine 1040 --gpu-memclock 1400

[cgminer-o]

Is this good ?

7950 = 1.750 MH
280x = 2.000 MH

[vlieg]

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u x.1 -p x -I 11 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192

I found that most rigs need the setx parameters with X11 despite lower thread concurrency (for scrypt you only need it with high thread concurrency)

This wil give me still hardware errors with a speed of about 1Mh/s per gpu card.


The other setting:

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u HrqxJyeguRvFcGU.1 -p x -I 13 -g 2 -w 400 --lookup-gap 2 --thread-concurrency 8192

also give hardware errors but much much more speed. about 2.2 Mh/s per gpu.

Don't know what i have to change  also don't know what speed is acceptable at the moment.

it seems odd that you get pretty much spot on the mhs but with errors (would usually be much lower or much higher). Do you mind posting a screenshot of sgminer running?

Also, did you add the setx parameters?

Also add --gpu-engine 1040 --gpu-memclock 1400

i will let it run including your 1040/1400 . and keep it running a few hours. will post later this day.
tnx in adance.


EDIT POST:
with --gpu-engine 1040 --gpu-memclock 1400 included, the program will not start.

[denfucoin]

When will hirocoin will be available on exchange plateforms ?

Thanks.

[HiroS]

Is this good ?

7950 = 1.750 MH
280x = 2.000 MH

Those seem to be good numbers, I think I saw 1.6MH for 7950 so you might want to share your settings. How are your temps and power consumption?

[brainape]

I'm seeing this can't be mined via sgminer, nvidia and windows.  

The noob question is, what about cudaminer?

I dig the coin.  Wish you the best.

[HiroS]

When will hirocoin will be available on exchange plateforms ?

Thanks.

It is available on a few exchanges with the highest volume on the exchange linked in below.

https://poloniex.com/exchange/btc_hic

[vlieg]

http://oi60.tinypic.com/iy3of9.jpg
A lot of errors in a short time.
5 x sapphire 280x toxic's
Windows 8.1

[precrime3]

Why my .bat file not working?



"C:\Users\N\Desktop\crypto\sgminer\sgminer.exe" -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u precrime3.n -p Worker password -I 11 -g 1 -w 256

Mining on a 7750. Would like to mine some hirocoin, but whenever i boot it up its too fast for me to see whats wrong with it.

[support@NCT]

www.newcointrade.com

Today we have two news.

We have update the NCT information.

We have open GRS/BTC and POC/BTC market.

--NCT team

[Hoshimaru]

Hi all (^_^)/

After being tipped about Hirocoin and it's low energy requirements compared to scrypt-based coins, I was immediately interested.
Having a totally different kind of algo also made me curious about it. I liked Max Keiser's coin just because of that more efficient mining, but Hiro is doing even better Or so I hope.

I've configured my MSI R9 280X Gaming OC's with the following:

Code:

"no-pool-disable" : true,
"kernel" : "darkcoin",
"scrypt" : true,
"api-allow" : "127.0.0.1",
"api-listen" : true,
"auto-fan" : true,
"gpu-fan" : "30-60", 
"intensity" : "13",
"temp-target" : "75",
"temp-overheat" : "78",
"temp-cutoff" : "80"

Which results in this when mining.

Code:

sgminer 4.1.0 - Started: [2014-03-24 15:57:37]
--------------------------------------------------------------------------------
(5s):5.587M (avg):5.574Mh/s | A:2  R:0  HW:0  WU:0.086/m
ST: 1  SS: 0  NB: 22  LW: 1741  GF: 0  RF: 0
Connected to Pool 1 (stratum) diff -0.000 as user Syaoran.Akira
Block: 5a7f1b0d...  Diff:22  Started: [16:20:21]  Best share: 11
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:                | 1.830M/1.834Mh/s | R:  0.0% HW:0 WU:0.030/m I:13
 GPU 1:                | 1.879M/1.880Mh/s | R:  0.0% HW:0 WU:0.029/m I:13
 GPU 2:                | 1.872M/1.874Mh/s | R:  0.0% HW:0 WU:0.027/m I:13
--------------------------------------------------------------------------------
[16:19:48] Accepted 0490b8ac Diff -0.000/-0.000 GPU 1 at Pool 1
[16:19:50] Network diff set to 22
[16:19:50] Stratum from Pool 1 detected new block
[16:19:54] Pool 0 difficulty changed to 0.004
[16:19:54] Accepted 3974eaee Diff -0.000/-0.000 GPU 1 at Pool 1
[16:19:58] Accepted 208774bd Diff -0.000/-0.000 GPU 0 at Pool 1
[16:20:21] Network diff set to 22
[16:20:21] Stratum from Pool 1 detected new block
[16:20:24] Pool 0 difficulty changed to 0.004
[16:20:32] Accepted 9f83e7ae Diff -0.000/-0.000 GPU 1 at Pool 1
[16:21:13] Pool 1 difficulty changed to 0.008
[16:21:13] Accepted 1d0041f7 Diff -0.000/-0.000 GPU 1 at Pool 1

Is this somewhere along what's to be expected? Is that very low WU something I should worry about (bad configuration or something else?)
The pool got me 34 coins in 30 minutes. Also, I see no temperature and fan readings in sgminer?

Except for these question, I'm impressed with that my rigs draws only 366 Watts from the wall

[Fastpow]

Hi all (^_^)/

After being tipped about Hirocoin and it's low energy requirements compared to scrypt-based coins, I was immediately interested.
Having a totally different kind of algo also made me curious about it. I liked Max Keiser's coin just because of that more efficient mining, but Hiro is doing even better Or so I hope.

I've configured my MSI R9 280X Gaming OC's with the following:

Code:

"no-pool-disable" : true,
"kernel" : "darkcoin",
"scrypt" : true,
"api-allow" : "127.0.0.1",
"api-listen" : true,
"auto-fan" : true,
"gpu-fan" : "30-60", 
"intensity" : "13",
"temp-target" : "75",
"temp-overheat" : "78",
"temp-cutoff" : "80"

Which results in this when mining.

Code:

sgminer 4.1.0 - Started: [2014-03-24 15:57:37]
--------------------------------------------------------------------------------
(5s):5.587M (avg):5.574Mh/s | A:2  R:0  HW:0  WU:0.086/m
ST: 1  SS: 0  NB: 22  LW: 1741  GF: 0  RF: 0
Connected to Pool 1 (stratum) diff -0.000 as user Syaoran.Akira
Block: 5a7f1b0d...  Diff:22  Started: [16:20:21]  Best share: 11
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:                | 1.830M/1.834Mh/s | R:  0.0% HW:0 WU:0.030/m I:13
 GPU 1:                | 1.879M/1.880Mh/s | R:  0.0% HW:0 WU:0.029/m I:13
 GPU 2:                | 1.872M/1.874Mh/s | R:  0.0% HW:0 WU:0.027/m I:13
--------------------------------------------------------------------------------
[16:19:48] Accepted 0490b8ac Diff -0.000/-0.000 GPU 1 at Pool 1
[16:19:50] Network diff set to 22
[16:19:50] Stratum from Pool 1 detected new block
[16:19:54] Pool 0 difficulty changed to 0.004
[16:19:54] Accepted 3974eaee Diff -0.000/-0.000 GPU 1 at Pool 1
[16:19:58] Accepted 208774bd Diff -0.000/-0.000 GPU 0 at Pool 1
[16:20:21] Network diff set to 22
[16:20:21] Stratum from Pool 1 detected new block
[16:20:24] Pool 0 difficulty changed to 0.004
[16:20:32] Accepted 9f83e7ae Diff -0.000/-0.000 GPU 1 at Pool 1
[16:21:13] Pool 1 difficulty changed to 0.008
[16:21:13] Accepted 1d0041f7 Diff -0.000/-0.000 GPU 1 at Pool 1

Is this somewhere along what's to be expected? Is that very low WU something I should worry about (bad configuration or something else?)
The pool got me 34 coins in 30 minutes. Also, I see no temperature and fan readings in sgminer?

Except for these question, I'm impressed with that my rigs draws only 366 Watts from the wall

How did you measure your watt usage?

[HiroS]

Why my .bat file not working?



"C:\Users\N\Desktop\crypto\sgminer\sgminer.exe" -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u precrime3.n -p Worker password -I 11 -g 1 -w 256

Mining on a 7750. Would like to mine some hirocoin, but whenever i boot it up its too fast for me to see whats wrong with it.

Run the .bat file from the command line to see what the error is. You could always drop the .bat file in the same directory and use a relative path to sgminer.exe. What I mean is put the .bat file next to the sgminer.exe and run the following.

Code:

sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3339 -u precrime3.n -p Worker password -I 11 -g 1 -w 256

[precrime3]

i got it to work using the darkcoin miner supplied from there website xD

[Hoshimaru]

How did you measure your watt usage?

With an energy meter you put on the wall plug. It has a digital display and shows wattage, voltage, costs according to price for the kwh etc. Quite convenient.

[matauc12]

A lot of errors in a short time.
5 x sapphire 280x toxic's
Windows 8.1

try engine 900 me clock 1250. And un install driver and reinstall. Sounds like 1 of your cards can't tolerate overclock very well and might have crashed your driver and didn't recover correctly.

And if you didnt, reboot your computer first. It will sometimes recover the driver correctly

[cassius69]

Love me some X11 and Hirocoin!

[matauc12]

Also, for baseline ideas on what your settings should be

http://www.reddit.com/r/Hirocoin/comments/21859k/x11_hirocoin_darkcoin_mining_hardware_comparison/