[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[HITTI2]

lol looks like they are punishing you for holding your btc with them at a fixed % instead of a set fee rate, on hashnest we pay .0002 fix btc to do any amount of a withdraw, if they are screwing people with a fixed % instead of a fixed amount. Then you are getting properly screwed.


Icon

https://www.hashnest.com/ won't even load Lulz.

Fuck hashnest, you need fucking antminers that cost in the grands. Idiot.

[LT_Riker]

Hello, im setting up my first 6 GPU mining rig and i have 5 working at the moment, and in daggerhash it reloads script multiple times in a few mins after saying error (??) is it a OpenCL issue in the script. is this normal? and why does it say pool/solo version upon loadup? is that also normal? am i required to have 16g of ram?

EDIT: i also noticed my card 1 is terminating the benchmark for Daggerhash.

 this is a fresh install as well

Specs
Z270A Prime
3x rx 470
2x rx 480
8 gig ram
pentium g4400

[Icon]

so let me get this straight, not only are we paying the required withdraw fee's we also have to pay a % to nicehash on top of withdraw fees, plus the 3% mining/selling fees?

Did i miss anything there?


PS

https://www.hashnest.com/ loads just fine for about 1 billion people, so might be your isp

Icon

[Elder III]

Hello, im setting up my first 6 GPU mining rig and i have 5 working at the moment, and in daggerhash it reloads script multiple times in a few mins after saying error (??) is it a OpenCL issue in the script. is this normal? and why does it say pool/solo version upon loadup? is that also normal? am i required to have 16g of ram?

EDIT: i also noticed my card 1 is terminating the benchmark for Daggerhash.

 this is a fresh install as well

Specs
Z270A Prime
3x rx 470
2x rx 480
8 gig ram
pentium g4400

Did you allocate at least 16GB of virtual memory (page file)? You will need at least that much for Claymore's Daggerhashimo miner. You may need to have even more then that to be stable, I set my page file to 4GB per GPU for it to be the most reliable mining Ethereum.

[sirazimuth]

I have to wait a week or more for payout free money this fucking bullshit. (fify)

great attitude there bud...lemme guess...you have issues with road rage?

GTFO if you don't know this acronym, GO THE FUCK OFF.

And changing the quotes, you're a fucking moron.

The real quote so no one gets confused by this monkey.

I have to wait a week or more for payout this fucking bullshit.

lol looks like they are punishing you for holding your btc with them at a fixed % instead of a set fee rate, on hashnest we pay .0002 fix btc to do any amount of a withdraw, if they are screwing people with a fixed % instead of a fixed amount. Then you are getting properly screwed.


Icon

https://www.hashnest.com/ won't even load Lulz.

Fuck hashnest, you need fucking antminers that cost in the grands. Idiot.

oh yeah... road rage...thought so ..have another beer dude...calm your juvenile ass down

nice trust rating btw

oh yeah... GTFO = "get the fuck out"
not  "go the fuck off" ...??    wtf ? (wtf= "what the fuck" just so you dont fuck that one up too)
 dude, you might wanna get your acronyms sorted out

http://www.urbandictionary.com/define.php?term=GTFO

[LT_Riker]

Hello, im setting up my first 6 GPU mining rig and i have 5 working at the moment, and in daggerhash it reloads script multiple times in a few mins after saying error (??) is it a OpenCL issue in the script. is this normal? and why does it say pool/solo version upon loadup? is that also normal? am i required to have 16g of ram?

EDIT: i also noticed my card 1 is terminating the benchmark for Daggerhash.

 this is a fresh install as well

Specs
Z270A Prime
3x rx 470
2x rx 480
8 gig ram
pentium g4400

Did you allocate at least 16GB of virtual memory (page file)? You will need at least that much for Claymore's Daggerhashimo miner. You may need to have even more then that to be stable, I set my page file to 4GB per GPU for it to be the most reliable mining Ethereum.

How would I go about doing that? Iv never dealt with that

[HITTI2]

Two morons on iggy. have a nice day.

[Elder III]

Hello, im setting up my first 6 GPU mining rig and i have 5 working at the moment, and in daggerhash it reloads script multiple times in a few mins after saying error (??) is it a OpenCL issue in the script. is this normal? and why does it say pool/solo version upon loadup? is that also normal? am i required to have 16g of ram?

EDIT: i also noticed my card 1 is terminating the benchmark for Daggerhash.

 this is a fresh install as well

Specs
Z270A Prime
3x rx 470
2x rx 480
8 gig ram
pentium g4400

Did you allocate at least 16GB of virtual memory (page file)? You will need at least that much for Claymore's Daggerhashimo miner. You may need to have even more then that to be stable, I set my page file to 4GB per GPU for it to be the most reliable mining Ethereum.

How would I go about doing that? Iv never dealt with that

No worries it's very easy to do. I'll give you a link to a guide rather then typing it all out myself. Check that out and then try setting it to 24,576 if you have enough space on your hard drive to do so. --- http://www.thewindowsclub.com/increase-page-file-size-virtual-memory-windows ---

[Icon]

"The withdrawal fee is currently set to 0.005 BTC or 0.5% of the withdraw amount (whichever is higher)." <... that is from your own wallet page, and that's also 1/2 of a week of mining ~ $10 to send my btc..


FYI as i posted earlier hashnest can send my btc ~ hour or two after i request it for .0002 ~ $0.43 cents vs over $10.00 you charge.

Question i am guessing due to my past payouts.. the auto payout to external wallets don't get charged with an .005 withdraw fee do they?

Let me offer you a suggestion, instead of assuming everyone wants there btc 5 seconds after they hit the withdraw button, why not allow people to choose how much they want to pay for fee's? the lower amount the longer it will take.

Icon

[djeZo]

"The withdrawal fee is currently set to 0.005 BTC or 0.5% of the withdraw amount (whichever is higher)." <... that is from your own wallet page, and that's also 1/2 of a week of mining ~ $10 to send my btc..


FYI as i posted earlier hashnest can send my btc ~ hour or two after i request it for .0002 ~ $0.43 cents vs over $10.00 you charge.

Question i am guessing due to my past payouts.. the auto payout to external wallets don't get charged with an .005 withdraw fee do they?

Let me offer you a suggestion, instead of assuming everyone wants there btc 5 seconds after they hit the withdraw button, why not allow people to choose how much they want to pay for fee's? the lower amount the longer it will take.

Icon

1. Hashnest = bitmain = antpool = can prioretize their own transactions if they wish. We do not have large BTC pool that we could use to push our low fee transactions ahead.

2. Letting people decide fee and majority of them would pick a fee that would cause transaction never to be confirmed but just stuck in limbo for a week. Nobody wants that.

[Icon]

ya i know antpool is a sleaze pool spv mining and only submitting 1 transaction instead of a whole 1 mb block. But what about my question about mining to external wallet, does that .005 fee get added to the other fees that nicehash charges?

Icon

[djeZo]

ya i know antpool is a sleaze pool spv mining and only submitting 1 transaction instead of a whole 1 mb block. But what about my question about mining to external wallet, does that .005 fee get added to the other fees that nicehash charges?

Icon

No. Just 3% fee if paying 0.1 or more or 4% fee paying less than 0.1.

[Icon]

ah thought so, so why in the world would people want to mine to a nicehash wallet knowing the fee regardless the amount is going to be near or over $10?

Icon

[djeZo]

ah thought so, so why in the world would people want to mine to a nicehash wallet knowing the fee regardless the amount is going to be near or over $10?

Icon

Fee into wallet is 2%. So it all depends how much you are earning and how quickly you need coins.

[HITTI2]

Holding my BTC ransom now?

Can't fucking withdraw. Button is grayed out and Enter key doesn't withdraw. *FUCKING MIGRAINE btc GIVEN ME IN LAST 2 WEEKS"

[djeZo]

Holding my BTC ransom now?

Can't fucking withdraw. Button is grayed out and Enter key doesn't withdraw. *FUCKING MIGRAINE btc GIVEN ME IN LAST 2 WEEKS"

If you would want to make a withdraw now, then the transaction fee would suck all of your amount thus you would get 0. Do you really want to do that? I don't think so...

[HITTI2]

Yea after I reach amount to withdraw I'm done with nicehash.

[Schleicher]

Ccminer sia:

Stratum notify: invalid parameters

Which ccminer?

All that I tried

EDIT: klaust stratum works, but crashes a couple seconds after,  with "invalid device symbol"

Have you tried Tpruvot?

yes, many flavours and old versions.
the only startum that works for me is klaust, but the miner crashes.

What card? Linux or Windows?

[pallas]

Ccminer sia:

Stratum notify: invalid parameters

Which ccminer?

All that I tried

EDIT: klaust stratum works, but crashes a couple seconds after,  with "invalid device symbol"

Have you tried Tpruvot?

yes, many flavours and old versions.
the only startum that works for me is klaust, but the miner crashes.

What card? Linux or Windows?

1070, linux.

[sundownz]

Any way to make Claymore miner an option in the GUI for Dagger mining on NVidia system ?

I can run it on command line but I cant seem to get it to show a worker name on the stats page.

Claymore is a bit faster + I can dual mine.