cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool!

[valkir]

Small question. What is the meaning of the left symbol. I got a red dot with a exclamation dot in it ??

Also how can I set me router to get access with the android app ??

Is there any tuto that explain all the setting ?

Thanks and great work.

[cryptoglance]

Red dot with an ! means there is a dangerous amount of hardware errors. This threshold is controlled in the Settings.

As for access with the android app, you need to port forward from to your internal machine. This is different across all modems and routers, but it's fairly easy to set up. It helps if you make the IP address of the machine CryptoGlance is installed on to a Static IP, this way you won't need to update your port-forward rules when a new IP is assigned.

We can set up something to explain the settings, a legend possibly. Be sure to read the README via the Help menu

[takagari]

Red dot with an ! means there is a dangerous amount of hardware errors. This threshold is controlled in the Settings.

As for access with the android app, you need to port forward from to your internal machine. This is different across all modems and routers, but it's fairly easy to set up. It helps if you make the IP address of the machine CryptoGlance is installed on to a Static IP, this way you won't need to update your port-forward rules when a new IP is assigned.

We can set up something to explain the settings, a legend possibly. Be sure to read the README via the Help menu

I input my Primsa ip, as well as tried my antminer s3, neither was picked up?

And n support for Slushes. Such a wicked looking app though!

[cryptoglance]

Red dot with an ! means there is a dangerous amount of hardware errors. This threshold is controlled in the Settings.

As for access with the android app, you need to port forward from to your internal machine. This is different across all modems and routers, but it's fairly easy to set up. It helps if you make the IP address of the machine CryptoGlance is installed on to a Static IP, this way you won't need to update your port-forward rules when a new IP is assigned.

We can set up something to explain the settings, a legend possibly. Be sure to read the README via the Help menu

I input my Primsa ip, as well as tried my antminer s3, neither was picked up?

And n support for Slushes. Such a wicked looking app though!

Hey takagari,

Is the API for these miners allowing access? You need to make sure that:
1) API is enabled via cgminer config
2) API listen allows the IP address of the machine running cryptoGlance.


As for Slushes pool, I'll add the pool sometime this week in the Nightly build. I'll focus on the current Slushes pool, followed by the Beta version (if it's different)

[cryptoglance]

We have just released our latest Beta! Be sure to check it out!

FEATURES
========
- Total Hashrates are now categorized by Rig Algorithms used
- Enable/Disable Total Hashrate via Tools dropdown
- New ability to edit Rigs and Pools
- Re-amped Rig summary and device details (percentages, etc)
- New Rig Details - Cleaner interface
- Ability to drag+drop pool priority for a rig
- Auto-Restart on BITMAIN asic failure (chain contains "x" instead of "0")
- Rig devices have two more types of details showing:
  BITMAIN Asic fan speed (fan 1, fan 2, fan 3, etc)
  BITMAIN Asic temperatures (temperature 1, temperature 2, temperature 3, etc)
- Rigs have a new option for Algorithm
- Rigs Algorithm is auto-set when using sgMiner v5+
- Ability to reset rig stats
- Ability to reset rig stats on pool change
- New FIAT conversions for most coins (Thanks to FunkyC: https://bitcoinindex.es/)
- New debug command to see raw miner data: CTRL + D

POOLS
=====
- [+POOL] Bitcoin Affiliate Network (http://mining.bitcoinaffiliatenetwork.com)
- [+POOL] CkPool
- [+POOL] Eligius
- [+POOL] MagicPool
- [+POOL] Multipool.Us
- [+POOL] NOMP

COINS
=====
- [+COIN] NeosCoin
- [+COIN] ReddCoin
- [+COIN] XPY - PayCoin | Note: Using ZenCloud or PayBase address may display balance of 0

[gsupp]

Great work, this is awesome software! I had it up and running in less than 10 minutes. I'm using it to monitor some spondoolies miners.

[cryptoglance]

Great work, this is awesome software! I had it up and running in less than 10 minutes. I'm using it to monitor some spondoolies miners.

Always like to hear that! Cheers

[valkir]

Did you manage to make the Avalon 4 to work ?? 

Let me know! I want to add it to my cryptoglance 

[cryptoglance]

Did you manage to make the Avalon 4 to work ?? 

Let me know! I want to add it to my cryptoglance 

I don't have one to test with, but I'm working to find a solution

[gsupp]

I'm having a little trouble with cryptoGlance showing all configured rigs in the "Current Rigs" table. It seems when there is a large number of rigs configured (about 30 or more), sometimes the "Current Rigs" table only lists 1 rig. Refreshing the page a few times will usually get the entire table of rigs to show up. Example:



Also would it be possible to use the Hashrate Avg number in the Current Rigs table and for calculating the total hashrate in the top right? The Hashrate 5s number fluctuates wildly on my ASICs (anywhere from 50% under to 50% over the expected hashrate on the Hashrate 5s number).

Thanks!

[valkir]

I do agree with the idea of using the avg hashrate. 

[cryptoglance]

Hey gsupp,

Thanks for reporting that... I'll see what I can do regarding the overview/current rigs table. Just curious, what is your rig update time set to? (Settings page)

As for the hashrate in the top-right corner, I'll change it to avg hashrate in the next 24 hours.

Cheers

[gsupp]

Thanks for reporting that... I'll see what I can do regarding the overview/current rigs table. Just curious, what is your rig update time set to? (Settings page)

Right now I have it set at 1 minute. It does seem related to refreshing, because if I let the page sit long enough, the rest of the rigs show up in the Overview list. I just tried changing the refresh rate to 10 seconds, it still happens but with a little less frequency it seems. Also if I just let the page sit, after about 10 seconds when it refreshes, the rest of the rigs show.

As for the hashrate in the top-right corner, I'll change it to avg hashrate in the next 24 hours.

Wow, thank you!

I bought the cryptoGlance Android app yesterday to show my support. I know it's not much, but these aren't my rigs I'm trying to monitor either  

[cryptoglance]

Thanks for reporting that... I'll see what I can do regarding the overview/current rigs table. Just curious, what is your rig update time set to? (Settings page)

Right now I have it set at 1 minute. It does seem related to refreshing, because if I let the page sit long enough, the rest of the rigs show up in the Overview list. I just tried changing the refresh rate to 10 seconds, it still happens but with a little less frequency it seems. Also if I just let the page sit, after about 10 seconds when it refreshes, the rest of the rigs show.

As for the hashrate in the top-right corner, I'll change it to avg hashrate in the next 24 hours.

Wow, thank you!

I bought the cryptoGlance Android app yesterday to show my support. I know it's not much, but these aren't my rigs I'm trying to monitor either  

We have rolled out a fix for the update issue and have changed the Total hashrate to avg speed. It's available on both the nightly and beta versions.

Cheers!

[bigbitmine]

I'd completely forgotten about this software. I've resolved the issue with the S1 miners not showing. Turns out they just needed firmware upgrades. Will shut down my current monitor software tomorrow afternoon and give this a test drive.

Here's hoping it performs well because it has some HUGE boots to fill.

[cryptoglance]

I'd completely forgotten about this software. I've resolved the issue with the S1 miners not showing. Turns out they just needed firmware upgrades. Will shut down my current monitor software tomorrow afternoon and give this a test drive.

Here's hoping it performs well because it has some HUGE boots to fill.

You let us know what it needs and we'll find a way to fill those boots!

[cryptoglance]

Version 2.0 has launched!

About ~1 month before 2.1 is rolled out. We've already had requests to add more pools... which is a good thing.

[vabchgent]

Now that I have the CryptoGlance app installed how do I use it. Looks like I have to open the instance on my desktop to the outside world to use the app. Any directions would be greatly apprciated. Thanks

[cryptoglance]

Now that I have the CryptoGlance app installed how do I use it. Looks like I have to open the instance on my desktop to the outside world to use the app. Any directions would be greatly apprciated. Thanks

I'm not too sure what you mean in regards to the outside world.

If you're using the Windows app, you need to have the app running as it acts as a bundled webserver. You can port-forward from your router to your machine to allow outside access. Once you port-forward, you can use cryptoglance on any web browser (on your phone, another computer, etc).

More information is found in the readme for the question: Q. I cannot get cryptoGlance to run. What can I check?
https://github.com/cryptoGlance/cryptoGlance-web-app/blob/master/README.md

[vabchgent]

I'm not too sure what you mean in regards to the outside world

-Port forward to The machine from the internet.

If you're using the Windows app, you need to have the app running as it acts as a bundled webserver. You can port-forward from your router to your machine to allow outside access. Once you port-forward, you can use cryptoglance on any web browser (on your phone, another computer, etc).


On the phone app you may want to allow location - You cant access the app internally on the subnet with the phone app it is trying to go out and come back in to the app.

Like home and away ip addresses.

Thanks