cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool!

[opentoe]

Will you ever be including alerts and more communication with the user so they don't have to keep looking at the stats? Nice having a text/sms/email indicating one of your miners is too hot or hashing lower then normal. This to me would be the development path for this program, right?

FYI you can do this already with the existing MobileMiner support.

I've been using M's monitor program which ties into mobileminer but those alerts rarely work. Does mobileminer just work off the data sent from the M's monitor program? If yes, then the alerts would be inaccurate as well. I've had rigs go offline and then receive an email alert from M's monitor program 8 hours later.

[1714207147]

1714207147

[1714207147]

1714207147

[1714207147]

1714207147

[1714207147]

1714207147

[cryptoglance]

Damn, this auto-update is killing me. Are there requests on getting that fixed up?

There is a problem with the user permissions that will not allow CryptoGlance to update.
Please run the command "sudo sh permissionfix.sh" in the root of the CryptoGlance directory to fix this issue.
********************
* Please contact support via reddit, bitcointalk, or IRC if you need assistance!

Yeah, we're trying

We don't have this issue, so we're trying to identify what is wrong. The latest nightly has better handling of permission issues, it's just a matter of getting there.

What OS are you running?

[opentoe]

Damn, this auto-update is killing me. Are there requests on getting that fixed up?

There is a problem with the user permissions that will not allow CryptoGlance to update.
Please run the command "sudo sh permissionfix.sh" in the root of the CryptoGlance directory to fix this issue.
********************
* Please contact support via reddit, bitcointalk, or IRC if you need assistance!

Yeah, we're trying

We don't have this issue, so we're trying to identify what is wrong. The latest nightly has better handling of permission issues, it's just a matter of getting there.

What OS are you running?

CentOs 6 32bit. I'll try to save the user_data and reinstall for the third time. When it does work, it works great. I have all my ports forwarded to the miners and I can access the URL anywhere on the Interent.

[vabchgent]

I am trying the antpool api and I enter my key and secret key -User id is my id I use on there site for mining. But goes grey and says pool is not available. Thanks

Have you pressed the Checkmark on the AntPool website where the api key and secret have been saved?
This green checkbox needs to be clicked to enable the api access to your antpool miner: (Where the blue circle is)

cryptoglance -Yes I checked it and used the key and the secret key - My user ID . Pool still does not show as live to cryptoglance. Sure the key and the secret are not flipped on the app. Just throwing it out there. Made sure that the check boxes were checked for only what cryptoglance needs. Still not working.

haha, I'm 100% positive the fields aren't flipped. It's possible that it's taking too long for the pool to respond. CryptoGlance waits 10 seconds before it determines that a pool is offline. When you navigate to https://www.antpool.com/home.htm does it come close to 10 seconds of loading time?

The only think I can recommend is to double check everything... I've generated a new API key + Secret and all is fine:

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks 

[cryptoglance]

Damn, this auto-update is killing me. Are there requests on getting that fixed up?

There is a problem with the user permissions that will not allow CryptoGlance to update.
Please run the command "sudo sh permissionfix.sh" in the root of the CryptoGlance directory to fix this issue.
********************
* Please contact support via reddit, bitcointalk, or IRC if you need assistance!

Yeah, we're trying

We don't have this issue, so we're trying to identify what is wrong. The latest nightly has better handling of permission issues, it's just a matter of getting there.

What OS are you running?

CentOs 6 32bit. I'll try to save the user_data and reinstall for the third time. When it does work, it works great. I have all my ports forwarded to the miners and I can access the URL anywhere on the Interent.

Can you SSH into the machine and run the following:

Code:

ps aux | egrep '(apache|httpd)'

The beginning of the line should say what the user group is. EG:

Code:

www-data 26244  0.0  0.4 385000 13224 ?        S    10:38   0:00 /usr/sbin/apache2 -k start

Then, navigate to cryptoglance: cd /var/www/ (or whatever you have called it)

Code:

sudo chmod -R 777 *
sudo chown -R www-data:www-data *

(Replace www-data:www-data with whatever your usergroup is... eg httpd:httpd or apache:apach2, etc)

[cryptoglance]

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks 

This is odd...

You can try to raise the timeout limit. It's located in: ./includes/functions.php | Line: 8

[cryptoglance]

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks 

I think I may have found a bug when editing pools, not specific to AntPool though.

Can you delete the pool and re-add it with api information? I think there's an issue when you edit a pool...

[vabchgent]

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks  

This is odd...

You can try to raise the timeout limit. It's located in: ./includes/functions.php | Line: 8

What would the pull look like in http format. I would like to test the api. Thanks

under user pools . I show ban,west,nice and (waffle never used or set up waffle)  

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

[opentoe]

Damn, this auto-update is killing me. Are there requests on getting that fixed up?

There is a problem with the user permissions that will not allow CryptoGlance to update.
Please run the command "sudo sh permissionfix.sh" in the root of the CryptoGlance directory to fix this issue.
********************
* Please contact support via reddit, bitcointalk, or IRC if you need assistance!

Yeah, we're trying

We don't have this issue, so we're trying to identify what is wrong. The latest nightly has better handling of permission issues, it's just a matter of getting there.

What OS are you running?

CentOs 6 32bit. I'll try to save the user_data and reinstall for the third time. When it does work, it works great. I have all my ports forwarded to the miners and I can access the URL anywhere on the Interent.

Can you SSH into the machine and run the following:

Code:

ps aux | egrep '(apache|httpd)'

The beginning of the line should say what the user group is. EG:

Code:

www-data 26244  0.0  0.4 385000 13224 ?        S    10:38   0:00 /usr/sbin/apache2 -k start

Then, navigate to cryptoglance: cd /var/www/ (or whatever you have called it)

Code:

sudo chmod -R 777 *
sudo chown -R www-data:www-data *

(Replace www-data:www-data with whatever your usergroup is... eg httpd:httpd or apache:apach2, etc)

root      1068  0.0  0.2  13972  4696 ?        Ss   Apr14   0:05 /usr/local/apache/bin/httpd -k start -DSSL
nobody   20266  0.0  0.1  14104  3516 ?        S    11:06   0:00 /usr/local/apache/bin/httpd -k start -DSSL

EDIT:
I signed in without the root account and received this back:

deligus   1659  0.0  0.0   2084   548 ?        S+   13:03   0:00 egrep (apache|httpd)


I made the appropriate changes and soon as I chmod 777 I get internal server error. So apparently everytime I need to update I need to reinstall and re-upload the master files all over again. Arghhh.

[cryptoglance]

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

I will look into this and post back on my findings. It's possible that the signature generation could be different/broken on windows.

root      1068  0.0  0.2  13972  4696 ?        Ss   Apr14   0:05 /usr/local/apache/bin/httpd -k start -DSSL
nobody   20266  0.0  0.1  14104  3516 ?        S    11:06   0:00 /usr/local/apache/bin/httpd -k start -DSSL

EDIT:
I signed in without the root account and received this back:

deligus   1659  0.0  0.0   2084   548 ?        S+   13:03   0:00 egrep (apache|httpd)


I made the appropriate changes and soon as I chmod 777 I get internal server error. So apparently everytime I need to update I need to reinstall and re-upload the master files all over again. Arghhh.

There's an issue with the user apache is running as. You can modify the user it should use in: /etc/httpd/conf/httpd.conf (around line ~27+28). I suggest the user: apache, httpd, or www-data. These users may need to be created (Not sure...).

Restart apache /etc/init.d/httpd restart...

Once that's done, whatever user and group you changed it to, repeat the previous steps to change cryptoglance file owners

[Mikestang]

Experienced a glitch tonight and not sure if it was cryptoGlance that caused it, but here's what happened.

I checked in on my miners with the android app from work this afternoon and notice that "one" miner (more than one device, it's a laptop with 5 USB miners: 4x nanofury sticks and a U3) had over 200 of the little grayed out devices.  For some reason the 4 nanofury sticks kept reseting and creating new devices, so I went to manage and restarted the miner to see if that would fix it.  It did not, so I called home and had my wife unplug the usb hub that the 4 sticks were in.  When I got home the cgminer on the laptop that controls these miners would not respond to any command, it didn't respond to any key strokes.  It was running fine, the U3 chugging along, but I had to force the command line closed.  Then I power cycled my usb miners and restarted everything just fine.

I'm curious if the remote miner restart would have caused cgminer to become non-responsive?  It's possible whatever was causing the sticks to reset over and over was actually what made cgminer unresponsive, but just thought I'd toss this out there in case.

[cryptoglance]

Experienced a glitch tonight and not sure if it was cryptoGlance that caused it, but here's what happened.

I checked in on my miners with the android app from work this afternoon and notice that "one" miner (more than one device, it's a laptop with 5 USB miners: 4x nanofury sticks and a U3) had over 200 of the little grayed out devices.  For some reason the 4 nanofury sticks kept reseting and creating new devices, so I went to manage and restarted the miner to see if that would fix it.  It did not, so I called home and had my wife unplug the usb hub that the 4 sticks were in.  When I got home the cgminer on the laptop that controls these miners would not respond to any command, it didn't respond to any key strokes.  It was running fine, the U3 chugging along, but I had to force the command line closed.  Then I power cycled my usb miners and restarted everything just fine.

I'm curious if the remote miner restart would have caused cgminer to become non-responsive?  It's possible whatever was causing the sticks to reset over and over was actually what made cgminer unresponsive, but just thought I'd toss this out there in case.

That's odd... I've ran into a simular issue in the past, ironically it was with HexFury USB miners. I believe this is a cgminer issue or driver issue. CryptoGlance only uses API calls, they do not effect USB devices and their connectivity

[vabchgent]

Experienced a glitch tonight and not sure if it was cryptoGlance that caused it, but here's what happened.

I checked in on my miners with the android app from work this afternoon and notice that "one" miner (more than one device, it's a laptop with 5 USB miners: 4x nanofury sticks and a U3) had over 200 of the little grayed out devices.  For some reason the 4 nanofury sticks kept reseting and creating new devices, so I went to manage and restarted the miner to see if that would fix it.  It did not, so I called home and had my wife unplug the usb hub that the 4 sticks were in.  When I got home the cgminer on the laptop that controls these miners would not respond to any command, it didn't respond to any key strokes.  It was running fine, the U3 chugging along, but I had to force the command line closed.  Then I power cycled my usb miners and restarted everything just fine.

I'm curious if the remote miner restart would have caused cgminer to become non-responsive?  It's possible whatever was causing the sticks to reset over and over was actually what made cgminer unresponsive, but just thought I'd toss this out there in case.

That's odd... I've ran into a simular issue in the past, ironically it was with HexFury USB miners. I believe this is a cgminer issue or driver issue. CryptoGlance only uses API calls, they do not effect USB devices and their connectivity

I have seen this before. I used multiminer at one time every so often my S5's would lock up for no reason every so often. multiminer is Nate's version of cryptoglance and using mobileminer. When I stopped using multi/mobil miner I had no problems. That's when I found crypto glance and used there app for cell with no problems.

[cryptoglance]

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks  

This is odd...

You can try to raise the timeout limit. It's located in: ./includes/functions.php | Line: 8

What would the pull look like in http format. I would like to test the api. Thanks

under user pools . I show ban,west,nice and (waffle never used or set up waffle)  

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

You were right, this was a windows specific issue. It could not handle the large number needed to encrypt api + secret for Antpool. There's a new nightly+beta released to fix this.

Thanks for the help and determining what was wrong

[vabchgent]

cryptoglance- Tried everything above and then some(actully created the api key with and without ip filter)Went into the file folder the keys look right in there also.  For some reason my install is not receiving from antpool. I connect in less then 10 sec. I am on 50/50 internet.In what file can I raise the 10 second rule to 30 or so see if that helps. Thanks  

This is odd...

You can try to raise the timeout limit. It's located in: ./includes/functions.php | Line: 8

What would the pull look like in http format. I would like to test the api. Thanks

under user pools . I show ban,west,nice and (waffle never used or set up waffle)  

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

You were right, this was a windows specific issue. It could not handle the large number needed to encrypt api + secret for Antpool. There's a new nightly+beta released to fix this.

Thanks for the help and determining what was wrong

Thank you for keeping the app up to date. Funny thing is I installed it on my laptop and it worked. Was going to delete it off my desktop and reinstall when I noticed the update and it was working there also.

[opentoe]

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

I will look into this and post back on my findings. It's possible that the signature generation could be different/broken on windows.

root      1068  0.0  0.2  13972  4696 ?        Ss   Apr14   0:05 /usr/local/apache/bin/httpd -k start -DSSL
nobody   20266  0.0  0.1  14104  3516 ?        S    11:06   0:00 /usr/local/apache/bin/httpd -k start -DSSL

EDIT:
I signed in without the root account and received this back:

deligus   1659  0.0  0.0   2084   548 ?        S+   13:03   0:00 egrep (apache|httpd)


I made the appropriate changes and soon as I chmod 777 I get internal server error. So apparently everytime I need to update I need to reinstall and re-upload the master files all over again. Arghhh.

There's an issue with the user apache is running as. You can modify the user it should use in: /etc/httpd/conf/httpd.conf (around line ~27+28). I suggest the user: apache, httpd, or www-data. These users may need to be created (Not sure...).

Restart apache /etc/init.d/httpd restart...

Once that's done, whatever user and group you changed it to, repeat the previous steps to change cryptoglance file owners

I think I'll worry about changing the apache user a little later, since other hosts are on this VPS. I'm not sure what the ramifications will be once I make those changes. For now I'll just stick with the build that it is currently working on and have to skip the small nightlys for now. I got it running great on my host through my Asus router. I forwarded everything to 4028 and then setup the individual internal ports as you suggested 1001, 1002, etc but soon as I tried to do the same thing with my father's router it just would not work. He has a Netgeat WNDR4500 model which is capable of port forwarding. Only took me a few minutes to configure all the internal port forwards, but they just wouldn't connect. Even tried port triggering. Firmware update, just about anything I could think of. It has to do something with his router I suspect. I flipped flopped the ports just to make sure I was correct in setting it all up. So right now he's stuck to using it locally until I figure it out. Strange.

[cryptoglance]

Could it possible have something to do with mine being a windows install. I believe you run linux. Thanks

I will look into this and post back on my findings. It's possible that the signature generation could be different/broken on windows.

root      1068  0.0  0.2  13972  4696 ?        Ss   Apr14   0:05 /usr/local/apache/bin/httpd -k start -DSSL
nobody   20266  0.0  0.1  14104  3516 ?        S    11:06   0:00 /usr/local/apache/bin/httpd -k start -DSSL

EDIT:
I signed in without the root account and received this back:

deligus   1659  0.0  0.0   2084   548 ?        S+   13:03   0:00 egrep (apache|httpd)


I made the appropriate changes and soon as I chmod 777 I get internal server error. So apparently everytime I need to update I need to reinstall and re-upload the master files all over again. Arghhh.

There's an issue with the user apache is running as. You can modify the user it should use in: /etc/httpd/conf/httpd.conf (around line ~27+28). I suggest the user: apache, httpd, or www-data. These users may need to be created (Not sure...).

Restart apache /etc/init.d/httpd restart...

Once that's done, whatever user and group you changed it to, repeat the previous steps to change cryptoglance file owners

I think I'll worry about changing the apache user a little later, since other hosts are on this VPS. I'm not sure what the ramifications will be once I make those changes. For now I'll just stick with the build that it is currently working on and have to skip the small nightlys for now. I got it running great on my host through my Asus router. I forwarded everything to 4028 and then setup the individual internal ports as you suggested 1001, 1002, etc but soon as I tried to do the same thing with my father's router it just would not work. He has a Netgeat WNDR4500 model which is capable of port forwarding. Only took me a few minutes to configure all the internal port forwards, but they just wouldn't connect. Even tried port triggering. Firmware update, just about anything I could think of. It has to do something with his router I suspect. I flipped flopped the ports just to make sure I was correct in setting it all up. So right now he's stuck to using it locally until I figure it out. Strange.

By chance it could be the cgminer config rejecting the API connection due to IP allowance?

[cryptoglance]

A new Nightly + Beta has been rolled out, this is specifically for bug fixes.

Code:

    [ v2.1.0.3-beta ]

    HOTFIXES
    ========
    - Fixed issue with Linux users who do not have posix installed

    KNOWN ISSUES
    ============
    - Users with lots of rigs may experience a long start-up time
    - Miner Failover may report incorrect active pool
    - Wallets can take a long time to load

---

    [ v2.1.0.2-beta ]

    HOTFIXES
    ========
    - Fixed issue when using only 1 rig
    - Padded the time-out for users with 60+ rigs

NOTE for LINUX Users:
If you get a blank box when updating (Looks like the picture below), you will need to manually update... OR you can install a php package called "php_process". I suggest the manual update, I corrected the issue in this release.

[Mikestang]

Experienced a glitch tonight and not sure if it was cryptoGlance that caused it, but here's what happened.

I checked in on my miners with the android app from work this afternoon and notice that "one" miner (more than one device, it's a laptop with 5 USB miners: 4x nanofury sticks and a U3) had over 200 of the little grayed out devices.  For some reason the 4 nanofury sticks kept reseting and creating new devices, so I went to manage and restarted the miner to see if that would fix it.  It did not, so I called home and had my wife unplug the usb hub that the 4 sticks were in.  When I got home the cgminer on the laptop that controls these miners would not respond to any command, it didn't respond to any key strokes.  It was running fine, the U3 chugging along, but I had to force the command line closed.  Then I power cycled my usb miners and restarted everything just fine.

I'm curious if the remote miner restart would have caused cgminer to become non-responsive?  It's possible whatever was causing the sticks to reset over and over was actually what made cgminer unresponsive, but just thought I'd toss this out there in case.

That's odd... I've ran into a simular issue in the past, ironically it was with HexFury USB miners. I believe this is a cgminer issue or driver issue. CryptoGlance only uses API calls, they do not effect USB devices and their connectivity

The USB connectivity wasn't the glitch I was trying to highlight, it was the unresponsive cgminer after the restart.  I tried it again and it seems the "restart miner" command issued remotely from the app will cause cgminer to become non-responsive to keyboard commands.  I haven't tried if I restart miner from the desktop application, but I have to imagine it will have the same results.

[cryptoglance]

Experienced a glitch tonight and not sure if it was cryptoGlance that caused it, but here's what happened.

I checked in on my miners with the android app from work this afternoon and notice that "one" miner (more than one device, it's a laptop with 5 USB miners: 4x nanofury sticks and a U3) had over 200 of the little grayed out devices.  For some reason the 4 nanofury sticks kept reseting and creating new devices, so I went to manage and restarted the miner to see if that would fix it.  It did not, so I called home and had my wife unplug the usb hub that the 4 sticks were in.  When I got home the cgminer on the laptop that controls these miners would not respond to any command, it didn't respond to any key strokes.  It was running fine, the U3 chugging along, but I had to force the command line closed.  Then I power cycled my usb miners and restarted everything just fine.

I'm curious if the remote miner restart would have caused cgminer to become non-responsive?  It's possible whatever was causing the sticks to reset over and over was actually what made cgminer unresponsive, but just thought I'd toss this out there in case.

That's odd... I've ran into a simular issue in the past, ironically it was with HexFury USB miners. I believe this is a cgminer issue or driver issue. CryptoGlance only uses API calls, they do not effect USB devices and their connectivity

The USB connectivity wasn't the glitch I was trying to highlight, it was the unresponsive cgminer after the restart.  I tried it again and it seems the "restart miner" command issued remotely from the app will cause cgminer to become non-responsive to keyboard commands.  I haven't tried if I restart miner from the desktop application, but I have to imagine it will have the same results.

We'll see what information we can get back from the cgminer devs. CryptoGlance isn't doing very much with cgminer, just a few API calls. It's very unlikely we're doing anything to cause it to hang.