|
zhulick
|
 |
June 08, 2014, 07:24:32 PM |
|
Have you checked it? Have you found blake blocks? I just found one CPU mining.  i actually want to try blake for the first time, so i haven't tried it yet  |
|
|
|
|
|
grotoc
|
|
June 08, 2014, 07:25:11 PM |
|
That's the one I'm using ! |
|
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 07:28:10 PM |
|
Guys if you could, could you please mine scrypt for a few minutes on this pool : http://www.zpool.co/pool/sfr/scryptI need to check if the scrypt block overwrites other blocks and causes a roll back. I am solo mining but the difficulty is 0.77. If you can please point your GPUs to that pool till we get the first block. So i can confirm if everything works well. |
|
|
|
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 07:36:55 PM |
|
We are 1 step closer to confirming that this update is all well. A groestl block was just found and it did not cause a roll back.
We just need scrypt to find a block to confirm completely.
|
|
|
|
|
|
zhulick
|
|
June 08, 2014, 08:13:17 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused  how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? |
|
|
|
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 08:19:53 PM |
|
Can you mine on this : http://pool.saffroncoin.com ? 2 of us are on that. We need to confirm a scrypt block early so i can push out the updates to everyone. |
|
|
|
|
pool-coins
Newbie
 Offline
Activity: 16
Merit: 0
|
|
June 08, 2014, 08:23:16 PM |
|
Okay, as soon as I switch to.
|
|
|
|
|
|
linked67
|
|
June 08, 2014, 08:36:07 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? |
|
|
|
|
zhulick
|
|
June 08, 2014, 08:41:53 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? define "just connected", because i have been connected for at least 15-20 minutes at that point, and through a few blocks... even now, with at least half hour into it, i am still seeing less... so again, what is "just connected" ? also, why am i not seeing stats for my wallet ?  |
|
|
|
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 08:58:31 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? define "just connected", because i have been connected for at least 15-20 minutes at that point, and through a few blocks... even now, with at least half hour into it, i am still seeing less... so again, what is "just connected" ? also, why am i not seeing stats for my wallet ? The block explorers are not updated to 1.3.1 yet. |
|
|
|
|
|
zhulick
|
|
June 08, 2014, 09:02:24 PM |
|
and one last question...  i am terrible at math, and again - still pretty new to p2p, so i'm just trying to understand something... total number of workers is 4... if you add up the hashrate of all 4 workers it equals the total for the node, so there isn't like a 5th hidden worker somewhere... yet, if you add up the coins for each worker, they add up to low 50's, not the 72... how, and where did those 20 coins go ? |
|
|
|
|
|
linked67
|
|
June 08, 2014, 09:13:13 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? define "just connected", because i have been connected for at least 15-20 minutes at that point, and through a few blocks... even now, with at least half hour into it, i am still seeing less... so again, what is "just connected" ? also, why am i not seeing stats for my wallet ? The block explorers are not updated to 1.3.1 yet. About the "just connected", if you have begin 30 min ago and the other guy have send share 24h ago, it's normal that the 20mh/s guy earn more sonce you have send less share that him. I understand it can be frustrating at start but keep in mind that you will earn coin when you leave. You lost nothing, it's just a sort of fair payout share about work that have been done. Be patient a bit more, you will see your payout growing to what you expect in some times. I don't predict you a timeframe but maybe in 1 or 2 hours you could earn more that the 20mh/s guy. And about you last post on coin and hash calculation, it can be a guy that has switched the payout address or a guy with X hashrate has been replaced by another one with similar hashrate. Click on the link below the the workers list and you can see everything you need to make accurate maths Some other pools use the same system (PPLNS) but p2pool don't hide anything, you just don't see it on other pools. |
|
|
|
|
zhulick
|
|
June 08, 2014, 09:18:51 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? define "just connected", because i have been connected for at least 15-20 minutes at that point, and through a few blocks... even now, with at least half hour into it, i am still seeing less... so again, what is "just connected" ? also, why am i not seeing stats for my wallet ? The block explorers are not updated to 1.3.1 yet. About the "just connected", if you have begin 30 min ago and the other guy have send share 24h ago, it's normal that the 20mh/s guy earn more sonce you have send less share that him. I understand it can be frustrating at start but keep in mind that you will earn coin when you leave. You lost nothing, it's just a sort of fair payout share about work that have been done. Be patient a bit more, you will see your payout growing to what you expect in some times. I don't predict you a timeframe but maybe in 1 or 2 hours you could earn more that the 20mh/s guy. And about you last post on coin and hash calculation, it can be a guy that has switched the payout address or a guy with X hashrate has been replaced by another one with similar hashrate. Click on the link below the the workers list and you can see everything you need to make accurate maths Some other pools use the same system (PPLNS) but p2pool don't hide anything, you just don't see it on other pools. thank you so much for the explanation... i'm not really frustrated, just dealing with something new, so i want to understand... so again, thank you for the explanation... |
|
|
|
|
|
linked67
|
|
June 08, 2014, 09:25:43 PM |
|
i don't mine p2p often, so maybe i'm not understanding something correctly, but this has me really confused how is it possible that 50 mh is getting less then half of coins per block then 20+ mh ? It's how P2P works, it's all about how many share you send. The 20mh/s guy has send more share, in fact he was on the pool before you. You just connect and can't ask to steal all his work on the next block found. It's a very fair system for everyone. In some time, don't know exactly how many minutes or hours, but at some point you will have 2.5x more that the 20mh/s with your 50mh/s as expected. P2Pool works like this: 1.at start your estimated payout is low and increase over time 2.after a while you have your full expected payout 3.when you switch your rigs on another coin, you still receive coin you have mine before but payout decrease slowly. What you lost at the beggining, you receive it when you leave. To explain a bit more, imagine you have mine a coin 3h and no blocks were found. You leave and some hours afterthe pool find a block, you still receive something. Nice, no ? define "just connected", because i have been connected for at least 15-20 minutes at that point, and through a few blocks... even now, with at least half hour into it, i am still seeing less... so again, what is "just connected" ? also, why am i not seeing stats for my wallet ? The block explorers are not updated to 1.3.1 yet. About the "just connected", if you have begin 30 min ago and the other guy have send share 24h ago, it's normal that the 20mh/s guy earn more sonce you have send less share that him. I understand it can be frustrating at start but keep in mind that you will earn coin when you leave. You lost nothing, it's just a sort of fair payout share about work that have been done. Be patient a bit more, you will see your payout growing to what you expect in some times. I don't predict you a timeframe but maybe in 1 or 2 hours you could earn more that the 20mh/s guy. And about you last post on coin and hash calculation, it can be a guy that has switched the payout address or a guy with X hashrate has been replaced by another one with similar hashrate. Click on the link below the the workers list and you can see everything you need to make accurate maths Some other pools use the same system (PPLNS) but p2pool don't hide anything, you just don't see it on other pools. thank you so much for the explanation... i'm not really frustrated, just dealing with something new, so i want to understand... so again, thank you for the explanation... New P2Pool user have always many question, no problem You can check on the very bottom of this link every address that receive coins: http://p2poolcoin.com:11918/static/classic/This may help you with your maths. I have begin to build P2Pool because i don't trust regular pools. I'm a miner myself. And with my french community (yes i'm french) we have make some tests and found that we receive a bit more coins on my nodes that on regular pools most of the time. Maybe luck or something else, don't know but we are very happy with p2pool. And payout are directly in your wallet, no need to wait until they mature, they mature in your wallet. |
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 09:39:16 PM |
|
We found a Scrypt Block! Chain hasn't rolled back.
Everything seems to be working well!
We can now confirm that 1.3.1 and 2.2.1 are the correct and stable versions of SaffronCoin.
We like to thank the community, miners, investors for supporting us in these hard times.
Let's get this baby out in the open now!
|
|
|
|
|
|
TizeN85
|
|
June 08, 2014, 09:44:12 PM |
|
Good job dev! Thanks for your work, I trust in you and your coin from the beggining and I still trust you for long time! You've faced all the problems, yes with issues but solved! Hope the price will grow now! |
|
|
|
|
|
saffroncoin (OP)
|
|
June 08, 2014, 09:45:51 PM |
|
Good job dev! Thanks for your work, I trust in you and your coin from the beggining and I still trust you for long time! You've faced all the problems, yes with issues but solved! Hope the price will grow now! Thanks! A Coin is nothing without a community. We are all a small one but strong! |
|
|
|
|
|
Poll
