[ANN] California Coin | SwissCex + C-CEX | California Coin Up 737.25 % This Week

[CaliforniaCoinCAC]

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

[Sm0k3WeeDEveryD@Y]

Just found a couple blocks pretty quickly guess my luck is good 

[CaliforniaCoinCAC]

Just found a couple blocks pretty quickly guess my luck is good 

Congrats!

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

[CaliforniaCoinCAC]

networkhashps" : 10245086 

We are growing quickly! Feel free to join our group Chat on Skype

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

[AllisionMarieLewis]

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

[MikeGAZ83]

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

Try this:

Code:

-I 19 --thread-concurrency 24000 --gpu-powertune 20

From:

https://litecoin.info/Mining_Hardware_Comparison

That should get you around ~ 670 kh/s make sure your GPU fans are at 85% at least or else you will burn out the GPU over time & watch the temps Don't go over 80C they can go higher but you want your card to last right 

[ea$ySTRe3T]

Interesting to see how quickly this community developed. It's true that the California people stick together lol 

I'm mining this one for the next few weeks. Hope to be able to trade this on the exchanges soon for BTC/LTC

and hey what about those pools dev team can we get some updates please that would be great

[CaliforniaCoinCAC]

Interesting to see how quickly this community developed. It's true that the California people stick together lol  

I'm mining this one for the next few weeks. Hope to be able to trade this on the exchanges soon for BTC/LTC

and hey what about those pools dev team can we get some updates please that would be great

Pool should be up shortly we thank you for your continued support in the mean time please tell your friends about CaliforniaCoin

Also feel free to join our group Chat on Skype!

Add: TheCaliforniaCoin On Skype To Join Our Chat Group! Everyone's Welcome! Newbies & Veterans!

[jgaspar]

Hi  

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away  

Not a lot more... a little more some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using  CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10  --thread-concurrency 16384

You can try to increase  --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase  --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

I'm getting similar or better results with SGMiner 4.1.153  with the added bonus of being capable to mine a lot more ALGO's

[AllisionMarieLewis]

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

Try this:

Code:

-I 19 --thread-concurrency 24000 --gpu-powertune 20

From:

https://litecoin.info/Mining_Hardware_Comparison

That should get you around ~ 670 kh/s make sure your GPU fans are at 85% at least or else you will burn out the GPU over time & watch the temps Don't go over 80C they can go higher but you want your card to last right 

Thanks ill try that 

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

Not a lot more... a little more some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using  CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10  --thread-concurrency 16384

You can try to increase  --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase  --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

Thanks  I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

[ea$ySTRe3T]

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

Try this:

Code:

-I 19 --thread-concurrency 24000 --gpu-powertune 20

From:

https://litecoin.info/Mining_Hardware_Comparison

That should get you around ~ 670 kh/s make sure your GPU fans are at 85% at least or else you will burn out the GPU over time & watch the temps Don't go over 80C they can go higher but you want your card to last right 

Thanks ill try that 

Hi 

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away 

Not a lot more... a little more some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using  CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10  --thread-concurrency 16384

You can try to increase  --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase  --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

Thanks  I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

The more stream processors & GB of memory your card has the higher your thread concurrency can go, you should do at least 23,000 with that video card.

I've seen many people reporting good kh/s with those settings and intensity @ 20 with fans @ 100% and good case ventilation will ensure your video card lasts many years not just a few months.

If you have poor case ventilation you could take off the side of it and that helps let the hot air get out. Or get a small desk fan to blow on it. Also get those little cans of compressed air and do it on your video card every 2 months you'll be surprised haha they can collect a lot of dust especially if you smoke blunts all day long like I do lol

[CaliforniaCoinCAC]

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

[jgaspar]

Thanks   I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

That's the value that gives me the best hashrate, my card is a sapphire with 3Gb, and it crashes with  --thread-concurrency 24000, BUT my card is UNDERCLOCKED.

You can also skip --thread-concurrency, as long as you have --shaders 1792, CGminer will calculate what it thinks is the best value for thread concurrency.

Is your card on a dedicated mining rig, or in a everyday PC like mine? If i  use -I 20, I will get the highest hashrate but my PC gets unusable.

Using xintensity instead of intensity allows me to have a perfectly usable PC, while hashing at 610 KH/s, however not all CGMiner versions allow it, I STRONGLY recommend that you use xintensity, unless its a dedicated mining rig.


If you feel like reading something, this guide is probably the best around.
http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu

[AllisionMarieLewis]

Thanks  I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

That's the value that gives me the best hashrate, my card is a sapphire with 3Gb, and it crashes with  --thread-concurrency 24000, BUT my card is UNDERCLOCKED.

You can also skip --thread-concurrency, as long as you have --shaders 1792, CGminer will calculate what it thinks is the best value for thread concurrency.

Is your card on a dedicated mining rig, or in a everyday PC like mine? If i  use -I 20, I will get the highest hashrate but my PC gets unusable.

Using xintensity instead of intensity allows me to have a perfectly usable PC, while hashing at 610 KH/s, however not all CGMiner versions allow it, I STRONGLY recommend that you use xintensity, unless its a dedicated mining rig.

Mines a dedicated mining rig.

Try

Code:

--thread-concurrency 23,000

that's giving me good results so far 663 KH/S and no crashes yet knock on wood hope this stays this way. Can barely move the mouse but no biggie

Temps not too bad eithor. Gonna be rocking this for a while. CaliforniaCoins to the moon

[CaliforniaCoinCAC]

We Need More Members On The DEV Team!

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

Everyone's Welcome! Newbies & Veterans!

[AllisionMarieLewis]

Getting harder to solo mine even with good equipment... Need that pool

[CaliforniaCoinCAC]

Getting harder to solo mine even with good equipment... Need that pool

Coming very soon please be patient

[MikeGAZ83]

Getting harder to solo mine even with good equipment... Need that pool

Indeed a pool would be great can't believe no pool owner has started a pool yet don't they realize they can take fee's 1% - 2%

so sad when there is a pool for bluecoin and yellowcoin and those are all clones too but what is neat about CaliforniaCoin is it's not a color & the people are very advanced when it comes to technology & new stuff. Could go very far if we continue at this pace people. Community brings success to coins and I think this one is on to something just my 2 cents.

[CaliforniaCoinCAC]

Getting harder to solo mine even with good equipment... Need that pool

Indeed a pool would be great can't believe no pool owner has started a pool yet don't they realize they can take fee's 1% - 2%

so sad when there is a pool for bluecoin and yellowcoin and those are all clones too but what is neat about CaliforniaCoin is it's not a color & the people are very advanced when it comes to technology & new stuff. Could go very far if we continue at this pace people. Community brings success to coins and I think this one is on to something just my 2 cents.

  This will turn out to be a lot bigger than Yellowcoin so I'm sure pool owners will start operating CaliforniaCoin pools shortly!

[t-minus]

hey I got a question for any linux guys out there. Im trying to get the cali coin wallet going on linux from source, I got the daemon running but when I run "./litecoind getinfo" im not getting any blocks... any ideas why its not connecting? im not getting any errors that I can see right now...