Egon
Member
Offline
Activity: 85
Merit: 10
|
|
September 12, 2014, 02:24:28 PM |
|
When I am polling ants via web, I can only get three to respond. The log will say "browser instance 0" "browser instance 1" "browser instance 2" but that's all I get. Selecting any three ants in my list will populate the results of those ants, but on the fourth ant selected and beyond it will only show the first three in the selection list on the status page. I have tried v 33 and v 34b1, same issue. Can't get the API to respond properly as I have multiple versions of ants on the same network. Thoughts?
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 13, 2014, 12:44:51 AM |
|
When I am polling ants via web, I can only get three to respond. The log will say "browser instance 0" "browser instance 1" "browser instance 2" but that's all I get. Selecting any three ants in my list will populate the results of those ants, but on the fourth ant selected and beyond it will only show the first three in the selection list on the status page. I have tried v 33 and v 34b1, same issue. Can't get the API to respond properly as I have multiple versions of ants on the same network. Thoughts?
It's quite possible there's something wrong with my code that causes it to only check up to 3. I'll have to look. (I only have 3.) What versions of the API are you using? M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
smilingloki
Member
Offline
Activity: 73
Merit: 10
|
|
September 13, 2014, 01:20:22 AM |
|
Hi there M ok so i may have done something bad https://bitcointalk.org/index.php?topic=671189.6340I went and upgraded my CG miner for a more stable platform, nice right - but now my beloved Antmonitor is not working ARIIIIIIIEEEEEEGHHHHH!!!!!!! comes back with - 13/09/2014 1:22:20 p.m.: ERROR when querying S3:1.101:80 (step 1): After parsing a value an unexpected character was encountered: {. Path 'STATS[0]', line 1, position 180. please help have i done something wrong? regards RJ
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 13, 2014, 01:42:24 AM |
|
Hi there M ok so i may have done something bad https://bitcointalk.org/index.php?topic=671189.6340I went and upgraded my CG miner for a more stable platform, nice right - but now my beloved Antmonitor is not working ARIIIIIIIEEEEEEGHHHHH!!!!!!! comes back with - 13/09/2014 1:22:20 p.m.: ERROR when querying S3:1.101:80 (step 1): After parsing a value an unexpected character was encountered: {. Path 'STATS[0]', line 1, position 180. please help have i done something wrong? regards RJ The API output from the S3s is, at best, malformed IMHO. As I posted in the S3 thread, it wouldn't surprise me in the least if the API output changes enough with the "real" cgminer that it breaks my monitor. The problem I have is I currently have one S3. It's difficult for me to support all the varying configurations out there all at once. It seems that these are all different for S3: - the very most recent firmware from bitmain, the one that the hash didn't match the posted one - the one before that one (has malformed JSON output) - the one before that one (has output from one API call mixed in with another) - cgminer 4.6 I've got the middle two covered right now. I'm going to try to add support for cgminer, and then the most recent firmware as soon as I get confirmation from someone that it's legit. It's awkward with one S3, and I'll be an unhappy camper if I brick it. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
smilingloki
Member
Offline
Activity: 73
Merit: 10
|
|
September 13, 2014, 01:46:02 AM Last edit: September 13, 2014, 02:03:52 AM by smilingloki |
|
|
|
|
|
spiceminer15
|
|
September 13, 2014, 04:17:53 AM |
|
Hi there M ok so i may have done something bad https://bitcointalk.org/index.php?topic=671189.6340I went and upgraded my CG miner for a more stable platform, nice right - but now my beloved Antmonitor is not working ARIIIIIIIEEEEEEGHHHHH!!!!!!! comes back with - 13/09/2014 1:22:20 p.m.: ERROR when querying S3:1.101:80 (step 1): After parsing a value an unexpected character was encountered: {. Path 'STATS[0]', line 1, position 180. please help have i done something wrong? regards RJ The API output from the S3s is, at best, malformed IMHO. As I posted in the S3 thread, it wouldn't surprise me in the least if the API output changes enough with the "real" cgminer that it breaks my monitor. The problem I have is I currently have one S3. It's difficult for me to support all the varying configurations out there all at once. It seems that these are all different for S3: - the very most recent firmware from bitmain, the one that the hash didn't match the posted one - the one before that one (has malformed JSON output) - the one before that one (has output from one API call mixed in with another) - cgminer 4.6 I've got the middle two covered right now. I'm going to try to add support for cgminer, and then the most recent firmware as soon as I get confirmation from someone that it's legit. It's awkward with one S3, and I'll be an unhappy camper if I brick it. M the json returned from the stats called is invalid. its missing a , and they also changed the structure of the returned data. i just got my batch 8 s3s today. and can confirm its not right.,check out the cgminer sticky thread. i have it posted there. ill post the specific stats json difference when i get back on my dev comp
|
|
|
|
spiceminer15
|
|
September 13, 2014, 04:27:30 AM |
|
if you just take the returned JSON string and do a replace on "}{" with "},{" it'll fix the returned JSON.
also the "stats" command returns an array of stats like before, except the 0 is some weird stats that no one cares about and 1 is the info we're wanting, before 0 was the good stuff
so if you just return the second object in that array you'll get the info ya need.
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 13, 2014, 11:08:19 AM |
|
I've got the money, I just can't find any at reasonable prices! And I can't stand bitmain's pre-orders. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 13, 2014, 11:09:52 AM |
|
if you just take the returned JSON string and do a replace on "}{" with "},{" it'll fix the returned JSON.
also the "stats" command returns an array of stats like before, except the 0 is some weird stats that no one cares about and 1 is the info we're wanting, before 0 was the good stuff
so if you just return the second object in that array you'll get the info ya need.
That's what I had to do with the 2nd to last firmware to get it to work. Doesn't make sense why the current one doesn't. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 13, 2014, 12:52:41 PM |
|
I applied cgminer 4.6.0 to my S3, and everything still works. I'm using firmware dated 'Thu Aug 7 10:56:26 CST 2014'.
What's different between yours and mine?
M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
spiceminer15
|
|
September 13, 2014, 02:49:13 PM |
|
I applied cgminer 4.6.0 to my S3, and everything still works. I'm using firmware dated 'Thu Aug 7 10:56:26 CST 2014'.
What's different between yours and mine?
M
I can look ay mine later tonight to see, from what I remember it was saying cgmijnwr version was 3.12.0
|
|
|
|
Egon
Member
Offline
Activity: 85
Merit: 10
|
|
September 15, 2014, 08:25:52 PM |
|
When I am polling ants via web, I can only get three to respond. The log will say "browser instance 0" "browser instance 1" "browser instance 2" but that's all I get. Selecting any three ants in my list will populate the results of those ants, but on the fourth ant selected and beyond it will only show the first three in the selection list on the status page. I have tried v 33 and v 34b1, same issue. Can't get the API to respond properly as I have multiple versions of ants on the same network. Thoughts?
It's quite possible there's something wrong with my code that causes it to only check up to 3. I'll have to look. (I only have 3.) What versions of the API are you using? M I'm not using the API setting; web scrape only.
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 15, 2014, 09:28:31 PM |
|
When I am polling ants via web, I can only get three to respond. The log will say "browser instance 0" "browser instance 1" "browser instance 2" but that's all I get. Selecting any three ants in my list will populate the results of those ants, but on the fourth ant selected and beyond it will only show the first three in the selection list on the status page. I have tried v 33 and v 34b1, same issue. Can't get the API to respond properly as I have multiple versions of ants on the same network. Thoughts?
It's quite possible there's something wrong with my code that causes it to only check up to 3. I'll have to look. (I only have 3.) What versions of the API are you using? M I'm not using the API setting; web scrape only. Yes, you said you don't use the API because you have multiple versions of ants on the same network. Which versions? M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Egon
Member
Offline
Activity: 85
Merit: 10
|
|
September 16, 2014, 12:08:00 PM |
|
S2 and S3 units. As long as I only select three or less to update, all works fine. And I can go through and select three at a time until I cover all my ants, but I can never get more than browser instance 0, 1 and 2 in the status log if I select four or more ants to poll. Only the first three in the checkbox list are polled.
|
|
|
|
Ziploc
|
|
September 18, 2014, 09:25:03 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ?
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 18, 2014, 09:55:14 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Ziploc
|
|
September 19, 2014, 12:15:30 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ??
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 19, 2014, 12:28:36 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ?? I think the important thing is the date. Have you ever upgraded the firmware? See here: https://www.bitmaintech.com/support.htm?pid=00720140411033846942qQqjOD460695M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Ziploc
|
|
September 19, 2014, 01:27:15 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ?? I think the important thing is the date. Have you ever upgraded the firmware? See here: https://www.bitmaintech.com/support.htm?pid=00720140411033846942qQqjOD460695M I got them used....they hash well and without issue.... I don't want to change firmware just to change and even without knowing that I already might have the latest... there must be a way of checking the version out....I just don't know where and how...
|
|
|
|
mdude77 (OP)
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
September 19, 2014, 09:20:08 AM |
|
Hey I really like your soft. I'm getting this error: [b]ERROR when querying S1:1.222:80 (step 1): Error reading JObject from JsonReader. Path '', line 0, position 0.[/b] Do You know what causes this ? Is it an S1, or an S3 labeled as an S1? Are you using the most recent firmware for it? M S1...however I don't know how to check the firmware version.... is it the Kernel Version 3.10.12 ?? I think the important thing is the date. Have you ever upgraded the firmware? See here: https://www.bitmaintech.com/support.htm?pid=00720140411033846942qQqjOD460695M I got them used....they hash well and without issue.... I don't want to change firmware just to change and even without knowing that I already might have the latest... there must be a way of checking the version out....I just don't know where and how... The link I provided above has a FAQ I believe that shows you how. My S1 is turned off atm else I'd look. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
|