[OFFLINE]P2Pmining.com-Hybrid P2Pool-NO FEE!!!-BTC/NMC/IXC/I0C/DEV/LTC

[Tittiez]

When I was intensity 9 my dead rate was ~11% after switching to intensity 5 my rate was ~5%. My average ping time is ~110ms to p2pmining.com(I'm on West coast).I did notice my AVG Mh/s did drop a little bit, but I've been playing around with my fan temp and clock speeds so i'm unable to tell how big of a difference it made.

Loosing a couple Mh/s isn't as bad as loosing 6% of your earnings. Oh, and 5% is lower then the average p2pool stalerate, 8.4%, so that's good too.

[DeathAndTaxes]

When I was intensity 9 my dead rate was ~11% after switching to intensity 5 my rate was ~5%. My average ping time is ~110ms to p2pmining.com(I'm on West coast).I did notice my AVG Mh/s did drop a little bit, but I've been playing around with my fan temp and clock speeds so i'm unable to tell how big of a difference it made.

Loosing a couple Mh/s isn't as bad as loosing 6% of your earnings. Oh, and 5% is lower then the average p2pool stalerate, 8.4%, so that's good too.

Don't confuse DOA w/ orphans but yea getting DOA rate down is more important.  A higher MH/s rate and high DOA rate simply means more electricity, heat, noise for "nothing".

[eroxors]

So, I set intensity on all my gpus to 7 and I still have roughly ~10% dead rate. When I set intensity lower, my gpus only mine at like 95%... I'm on Win7, cgminer.

Try changing threads per GPU to 1.

I have that set to 1 thread per gpu.

I run cgminer with -I 7 -g 1

Intensity 7 mines at 97% GPU, 8 mines at 98% gpu, 5 mines at 94% and 3 mines at 90%

[iopq]

can I mine from p2pool myself and somehow submit hashes to this pool for NMC? I don't feel like my luck is good enough to be solo-mining NMC

[DeathAndTaxes]

can I mine from p2pool myself and somehow submit hashes to this pool for NMC? I don't feel like my luck is good enough to be solo-mining NMC

Simple answer is ... no.

Complex answer is that when you "mine" you are solving a specific block.  All the inputs of the block including the merkle tree (which includes the coinbase which include both the reward address and merged chain hash) plus the nonce form the block header.  A hash which solves that block only solves that exact block header.   There is no method to both solo and pool mine at the same time.

[rdponticelli]

Nice work!

[eroxors]

Can someone with < 5% dead rate please share their secret? I'm at ~10% ~2200ghs with ~200mhash dead

Thanks!

[pyroim]

2716 shares.. agression 6...  no stales

no pay outs yet but ill get back and post when that happens
so far seems rewards are very fair and the 0.5% fee is actually logical! thanks for running it!


current set
7850 underclocked due to this weird heat wave on the west coast, 223 MH/s
noticed my MH/s rate is showing up at around 390 Mh/s on the "current miners" page  discrepancy between the numbers my miner is putting out and the actual MH/s rate?



BTC address: 1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe

[Tittiez]

2716 shares.. agression 6...  no stales

no pay outs yet but ill get back and post when that happens
so far seems rewards are very fair and the 0.5% fee is actually logical! thanks for running it!


current set
7850 underclocked due to this weird heat wave on the west coast, 223 MH/s
noticed my MH/s rate is showing up at around 390 Mh/s on the "current miners" page  discrepancy between the numbers my miner is putting out and the actual MH/s rate?



BTC address: 1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe

Its a shitty estimate, don't worry about it.

[pyroim]

was just making sure that it wasn't a client side / miner software issue! thanks for clarifying

[RandomQ]

anyone else notice higher ping times and pool not providing work fast enough messages? I verified with a completely different ISP,ping times seem to be going up like 100,200,300,400,500,400,300,200,100 and then back down.I'm getting the message maybe ever other min. I thought it was a problem with my ISP until I verified ping times on another ISP. I'm still getting lower stale shares 5.8%.

[pyroim]

potently pool side though i am getting work very fast and the " waiting on new work" line is only popping up for maybe a second every 10-20 shares and NO STALES,

 check your 9332 port to see if mabey you are limiting traffic?

[TravisE]

I did experience some connectivity problems with p2mining.com for a little while a couple of days ago. That's when I also discovered that my local p2pool fallback wasn't working due to my neglecting to upgrade p2pool (which also required me to upgrade bitcoin) since the last mandatory update. Kind of a frustrating day since it wasn't immediately obvious to me what the problem was.  

[Tittiez]

Only 2.5% stales for me!

[check_status]

My settings for my 6850:
cgminer -o pool:port -k phatk -v2 -w 128 -g 1 -I 8 --auto-fan --temp-target 65 --gpu-engine 850 --gpu-memclock 1000

I get 15/1 longpoll/accepted and my DOA 8%

[check_status]

P2Pool seems to be on a big ass run of bad luck. Figures that would happen after I shell out some bucks for a new server.

These shells? http://www.24shells.net/#cho2

Are you on VPS or Dedicated now? Maybe look at these also...
http://ritmohost.com/index.php?page=linux_vps
http://magmahost.com/vps.html
http://swvps.com/dedicated-servers.html
http://www.sshvm.com/

One of the above has dedicated servers starting at $34.95/month.

[JayCoin]

P2Pool seems to be on a big ass run of bad luck. Figures that would happen after I shell out some bucks for a new server.

These shells? http://www.24shells.net/#cho2

Are you on VPS or Dedicated now? Maybe look at these also...
http://ritmohost.com/index.php?page=linux_vps
http://magmahost.com/vps.html
http://swvps.com/dedicated-servers.html
http://www.sshvm.com/

One of the above has dedicated servers starting at $34.95/month.

Just went from VPS to dedicated server. All the daemons for the currencies ate up too much memory for a VPS.  I couldn't even compile on the VPS. Had to compile at home and upload the binary. Everyone probably saw some connection issues during the change over and testing.  Thanks for the heads up on the other suppliers.  I am paying $120 a month for the following:

Hardware   
2.33Ghz Intel Core 2 Quad Q8200
2GB DDR2
500GB SATAII
Remote Reboot
Network   
3TB (3,000GB) Transfer / 100Mbps Port
Software   
Ubuntu 11.10 64 Bit

[JayCoin]

DUE TO POOL HOPPING I'LL WILL BE SWITCHING TO PPLNS INSTEAD OF PROPORTIONAL.

This will occur in the next day or two.  There will be a bump (30 seconds of all rejected shares) in the server when I restart P2Pool.

Should be interesting mathmatically. A PPLNS pool (p2pmining) mining to a PPLNS pool (p2pool). Double Whammy

Any suggestions on time for a PPLNS. Should it be 24hrs like p2pool, 12hrs, 48hrs, 1 week, etc.? 

[Tittiez]

DUE TO POOL HOPPING I'LL WILL BE SWITCHING TO PPLNS INSTEAD OF PROPORTIONAL.

This will occur in the next day or two.  There will be a bump (30 seconds of all rejected shares) in the server when I restart P2Pool.

Should be interesting mathmatically. A PPLNS pool (p2pmining) mining to a PPLNS pool (p2pool). Double Whammy

Any suggestions on time for a PPLNS. Should it be 24hrs like p2pool, 12hrs, 48hrs, 1 week, etc.? 

I'm guessing this guy is the culprit?
http://p2pmining.com/?method=miner&data=173Qmir9hTmvkb3Cmvgj78AV2CjL5azZYS

[JayCoin]

I get 3.4% DOA and I have the biggest miner on P2Pmining.com.  If we can all get to 3.4% we would be making a killing.  We would be making more per hash than any other pool, fee included.

I am running CGMiner 2.2.5 with -g 1 . That's it. I don't set the intensity. I let the dynamic intensity do its job.  I am in Northern Michigan and the server is in Southern Florida and My mining rigs are on a crappy AT&T DSL. I use Linuxcoin on thumb drives and have 7 5970s and 2 5870s and 2 5770s.  The 5770s are mining on windows 7 64bit.  That's all there is to it.