ANTMINER S3+ Discussion and Support Thread

[hurricandave]

Is the MAC address showing up? My S7 blanked it out when I switched from DHCP to Static for some reason. I did a reset and reconnected thru the default address and was able to successfully change things the second time around.

[algomaspur]

yes there is a mac address assigned to it I did an ip search and everything is connected and working.  Now I just have to figure out how to get my miner going.

[in2tactics]

ok when I try to change my default gate way to 192.168.1.1 I get an error message that says warning the default gateway is not on the same network segment (subnet) that is defined by two ip address do you want to  continue then when I hit continue I lose my internet connection with my router.  My desktop Is wireless connected to my router and my antminer is connected to my router.  my normal routers default gateway is a high number.  Is there a possibility that I need to get a new router Please somebody help me out.

Are you using the right subnet mask? I noticed in your earlier post you said the following:

Status   Name   IP   Radmin   Http   Https   Ftp   Rdp   Shared folders   NetBIOS group   Manufacturer   MAC address   User   Comments
Ok   192.168.1.xx   192.168.1.xx                        Shenzhen Ogemray Technology Co., Ltd.      Update after I set it up the old owner had it set to a specific address so when I changed from static to dhcp it went back to the address he had it set at.  I checked the unit as it is hooked up to my router and is working great.  Ok whats the next step to get my router to tie to my computer.   When I changed from static to dhcp it inactivated the 192.168.1.99  and activated the top number I know thats it now how to access it.   thats listed as inactive under my ip scanner.  Ok whats the next step.lol  Thank you so much for any help as I am a disabled veteran.  my pc is a custom built Intel I7 4th generation computer running windows 10.  this one is  Dead   192.168.1.99   192.168.1.99      Paragon Technologies Inc.      

You said, "192.168.1.xx 192.168.1.xx" and "192.168.1.99 192.168.1.99" which leads me to believe that you are typing the IP address twice, once in the IP address and once in the subnet mask.

Based on the following statement:

Ok guys here I go again I am able to log on to the interface and set up my miner but once I do nothing happens? here is the info my computer won't let me take screen shots so I am copy pasting
   antMiner
Model   S3
Firmware Version   Fri Jan 9 20:41:34 CST 2015
Kernel Version   3.10.12
Local Time   Mon Dec 2 11:42:52 2013
Uptime   0h 15m 6s
Load Average   0.00, 0.04, 0.09
Memory
Total Available   
48848 kB / 61568 kB (79%)
Free   
38852 kB / 61568 kB (63%)
Cached   
7772 kB / 61568 kB (12%)
Buffered   
2224 kB / 61568 kB (3%)
Network
IPv4 WAN Status   

eth1    Type: static
Address: 192.168.1.x
Netmask: 255.255.255.0
Gateway: 192.168.1.1
DNS 1: 192.168.1.1
Connected: 0h 9m 35s
Active Connections   
85 / 16384 (0%)
DHCP Leases
Hostname    IPv4-Address    


the above is off of the front screen of my miner status

You should be using the subnet mask 255.255.255.0. In other words, I was expecting you to write "192.168.1.xx 255.255.255.0" or "192.168.1.99 255.255.255.0" in that first quote I gave.

[darthtony]

https://s31.postimg.org/4x0w5hzuj/antminer.jpg

i have this screen !
What it means ? that it is broken ?

[Real-Duke]

i have this screen !
What it means ? that it is broken ?

This status screen says that nothing works because there is no system load. Have you already done your initial setup Network/poolsettings?

[aarons6]

i have this screen !
What it means ? that it is broken ?

check to make sure there is no blank spaces at the end of the pool url.

[darthtony]

check to make sure there is no blank spaces at the end of the pool url.

checked !
no space at the end !

[Real-Duke]

Can you show a picture from your "Miner Configuration" tab?

[darthtony]

Can you show a picture from your "Miner Configuration" tab?

https://s32.postimg.org/b3rlxsuit/antminer2.jpg

here !

[Real-Duke]

Thanx and sorry...I can't see anything wrong here

[PantminerS7]

Thanx and sorry...I can't see anything wrong here

Without knowing any more than your picture, I'd bet my money that your internet connection isn't working.

Go in System->Network and see if it's receiving/sending anything. Are you using ethernet cable or wifi solution?

[adaseb]

Still surprised people are running these S3 miners.

Brings back good memories.

[notlist3d]

Still surprised people are running these S3 miners.

Brings back good memories.

I refer to the S3's as tanks in a good way.   They really seem to just keep going and going, I hope all my S3's are mining for someone still.  Many of these have had multiple owners and keep moving around.

Also S3's are miners that had personalities some ran better at certain freq then others, so it really got the miner to tweak it.  I have fond memories of tweaking my S3 to S3+'s. 

[algomaspur]

ok guys I got my bitminer going I switched it to dhcp with some great help from a friend, and then I was able to go into my router and look at the ip address being used by ethernet one on the back of my modem/router.  I can't believe it was that easy.  If anybody runs into problems trying to setup their miner with Frontier Communications I can help you out.  Thanks for all the replies and sorry for the small posts.

[darthtony]

Thanx and sorry...I can't see anything wrong here

Without knowing any more than your picture, I'd bet my money that your internet connection isn't working.

Go in System->Network and see if it's receiving/sending anything. Are you using ethernet cable or wifi solution?

https://s31.postimg.org/ca4ubufa3/antminer3.jpg

I'm on ethernet !

[lemmyK]

I still have 6 units antminer S3. When I watch the prices on eBay. I think did not have cost or sense them to run again. postage is so expensive that If i sell them to someone not to retaliate. as well as heating units are already too expensive. Or does anyone have any ideas? next week will go to waste.

[Real-Duke]

The selling prices on ebay in my area are between 30 and 80Eur 
Looks to me that the buyers have no idea what the actual halving means...

[darthtony]

So .... is it broken ?

[epichaberdasher]

How much data are your guys S3's using in a month with the current block settings ?

I have a something on my network thats using 5GB a day now, and its just a PC and two miners, and the PC isnt the culprit i checked already but not sure how much data the miners are using but it shouldnt be that high, it used to be a couple hundred MB.

Not sure if the stats in the antminer log the total data statistics, seems to only show realtime.

[Real-Duke]

Do you have your own node? A miner generates less then 5 GB a month, sorry have no exactly counter of traffic for you but its only a few MB / day