[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[sxemini]

Oh and another question (I'm posting this separately to avoid mixing up answers): my main program is 8.4.6 and Remote agent for linux is 8.3.3 How do I update RA via Awesome miner app?

Right click on the the rig in Awesomeminer and update remote agent?

[1715332060]

1715332060

[1715332060]

1715332060

[1715332060]

1715332060

[1715332060]

1715332060

[1715332060]

1715332060

[1715332060]

1715332060

[Commie]

Dude i write, these commands are for TEAMREDMINER!!! It will not working for Phönixminer. Use Teamredminer and it will work. Phönixminer not support zilliqa+eth mining on binance pool at the moment.

Configuration for Nanominer is easier if you want, but only if you read my hole messages 

Thanks for correction but to be fair you never said Phoenix will not work at all Are you sure it doesn't currently support zil+eth?

[patrike]

Version 8.4.8 (Development preview of 8.5)

 Note
  - The code signing certificate for the MSI installers has been updated. Windows may show a SmartScreen warning as the certificate is new.
 GPU mining
  - Beta: Awesome Miner and Remote Agent can be configured to communicate via Cloud Services, without a direct communication link between them. This makes deployments of remote sites easier as it no longer requires VPN.
 Features
  - Virtual Miner Groups can include other Virtual Miner Groups
 Changes
  - Reduced the number of separate DLL-files for Awesome Miner and Remote Agents
 Mining software
  - PhoenixMiner 5.6d
  - Lolminer 1.28a
  - CpuMiner-Opt 3.16.3
 Corrections
  - Correction to the trigger for detecting if a miner isn't hashing

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[sxemini]

Dude i write, these commands are for TEAMREDMINER!!! It will not working for Phönixminer. Use Teamredminer and it will work. Phönixminer not support zilliqa+eth mining on binance pool at the moment.

Configuration for Nanominer is easier if you want, but only if you read my hole messages 

Thanks for correction but to be fair you never said Phoenix will not work at all Are you sure it doesn't currently support zil+eth?

But i write every time use TEAMREDMINER 

[Commie]

But i write every time use TEAMREDMINER 

Quote from your first answer:

This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.

How was I suppose to figure out Phoenix won't work at all LOL

[sxemini]

Version 8.4.8 (Development preview of 8.5)

 Note
  - The code signing certificate for the MSI installers has been updated. Windows may show a SmartScreen warning as the certificate is new.
 GPU mining
  - Beta: Awesome Miner and Remote Agent can be configured to communicate via Cloud Services, without a direct communication link between them. This makes deployments of remote sites easier as it no longer requires VPN.
 Features
  - Virtual Miner Groups can include other Virtual Miner Groups
 Changes
  - Reduced the number of separate DLL-files for Awesome Miner and Remote Agents
 Mining software
  - PhoenixMiner 5.6d
  - Lolminer 1.28a
  - CpuMiner-Opt 3.16.3
 Corrections
  - Correction to the trigger for detecting if a miner isn't hashing

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Hi Patrike,

My progress column did not work after the update:

"<font color=\"black\"><b>"+"Up:  " + "</b></font>" + string.Format("{0}d {1}h {2}m", TimeSpan.FromSeconds(system.WindowsUptimeSeconds).Days, TimeSpan.FromSeconds(system.WindowsUptimeSeconds).Hours, TimeSpan.FromSeconds(system.WindowsUptimeSeconds).Minutes) + "<font color=\"black\"><b>"+" Miner:  " + "</b></font>" + string.Format("{0}d {1}h {2}m", TimeSpan.FromSeconds(status.SecondsSinceStart).Days, TimeSpan.FromSeconds(status.SecondsSinceStart).Hours, TimeSpan.FromSeconds(status.SecondsSinceStart).Minutes) +
"<font color=\"black\"><b>"+ " A: "+ "</b></font>"+ status.Accepted +
"<font color=\"black\"><b>"+ " R: "+ "</b></font>"+ status.Rejected +
"<font color=\"black\"><b>"+ " A%: "+ "</b></font>" + Math.Round((status.Accepted * 100) / (float)(status.Accepted + status.Rejected), 2) + "%" +
"<font color=\"black\"><b>"+" S: "+ "</b></font>" + status.Stale + "\r" +
"<font color=\"black\"><b>"+" HW: "+ "</b></font>" + (status.HwErrors > 0 ?  "<font color=\"red\"><b>" +  status.HwErrors + "</b></font>": status.HwErrors.ToString()) +
"<font color=\"black\"><b>"+" HW %: "+ "</b></font>" + Math.Round((status.HwErrors * 100) / (float)(status.Accepted + status.Rejected + status.HwErrors), 2) + "%" +
"<font color=\"black\"><b>"+" Coins/day: "+ "</b></font>" + Math.Round(miningHelper.GetCoinsPerDay(), 4)



In version 8.4.7 is all fine.

EDIT:

Compact list always not working. I tried only with Accepted shares, no success.

Do you have a link for 8.4.7?

But i write every time use TEAMREDMINER  

Quote from your first answer:

This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.

How was I suppose to figure out Phoenix won't work at all LOL

Ok but at this point i didn't see that you want to use binance pool, so i made a config for ethermine that will work for all miners. Did you try this config with Teamredminer?

[patrike]

Version 8.4.9 (Development preview of 8.5)

 Changes
  - When sorting on Performance, Disconnected miners should be on top of the miner list
 Corrections
  - Correction to scripting expressions for the Progress field

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[patrike]

Hi Patrike,

My progress column did not work after the update:
In version 8.4.7 is all fine.

Thanks for the report. This was indeed an issue. Can you please upgrade to the latest version 4.8.9?

[sxemini]

Hi Patrike,

My progress column did not work after the update:
In version 8.4.7 is all fine.

Thanks for the report. This was indeed an issue. Can you please upgrade to the latest version 4.8.9?

Yes progress column works again.

[mettalmag]

please somebody explain to me the firmware side
I want to use L3+s firmware from awesomeminer and there's two option license and license free,
I understand license free has 3% fee but what is this license, I mean I own awesomeminer license does it count like firmware license too? or do I need to buy one to get 2% devfee?

[patrike]

Hi.

I am trying to use API to stop and start miners, I am really new to this.

Trying to use curl like this:
curl.exe http://XXXX:17790/api/miners/28?action=stop

But when I do that I only get the summary response from the miner. What am I doing wrong here ?
Any help would be appreciated.

### Update - I ended up using powershell instead, line like this:
Invoke-RestMethod -Method 'Post' -Uri http://xxxxx:17790/api/miners/28?action=start

Hi,

All API actions like stopping a miner must use a HTTP Post-request, like you did with Powershell. For CURL it must be specified with "-X POST" to make it work.

[patrike]

please somebody explain to me the firmware side
I want to use L3+s firmware from awesomeminer and there's two option license and license free,
I understand license free has 3% fee but what is this license, I mean I own awesomeminer license does it count like firmware license too? or do I need to buy one to get 2% devfee?

Thanks for the question.

There are two versions of the firmware for Antminer L3+, one with 2% mining fee and another one with 3% mining fee. If you have enough licenses in Awesome Miner already, you can use the 2% firmware. If you run out of licenses in Awesome Miner, for example that you are already consuming 20 of 20 licenses and want to add additional Antminers, you can still do add more miners if install the firmware with a 3% mining fee on them. You can for example have a license for 20 miners, but manage a total of 25 miners as long as 5 of them run the firmware with 3% mining fee.

[Kylezo]

Hello there, noob checking in.

Every once in a while, almost exclusively with zpool (and more specifically, X13) but not always, I get insane profit quotes and my rig will switch to mining trash coins at very low hashrates. I have whattomine, coincalculators, and cointomine as statistics sources. Today, for instance, my actual hashrate and profit got totally derailed by a $1,069/hr 16.00 MH/s (!!!! seriously?) quote that swapped all my algo's for about 20 minutes until I caught it. I have tried blacklisting but I kind of prefer not to do that and the inline ignore option only allows for 24hrs at a time if I wanted to cherry pick (and I'm not going to pretend I can predict for all future scenarios what algos/coins/pools I would need to blacklist, anyways). Can anyone explain why this happens, and how to avoid it?

Thanks

side note: to get it to run by default, I had to modify the command line for ccminer alexis to add -i 20 because it was giving memory errors and bricking my mining whenever switcher picked a ccminer algo (in this case on a 1060 6gb). Is this a normal, known issue?

[sxemini]

Hi.

I am trying to use API to stop and start miners, I am really new to this.

Trying to use curl like this:
curl.exe http://XXXX:17790/api/miners/28?action=stop

But when I do that I only get the summary response from the miner. What am I doing wrong here ?
Any help would be appreciated.

### Update - I ended up using powershell instead, line like this:
Invoke-RestMethod -Method 'Post' -Uri http://xxxxx:17790/api/miners/28?action=start

Hi,

All API actions like stopping a miner must use a HTTP Post-request, like you did with Powershell. For CURL it must be specified with "-X POST" to make it work.

I used this commands in the past "curl -i -d POST http://192.168.178.10:17790/api/miners/60?action=start"

[patrike]

Hello there, noob checking in.

Every once in a while, almost exclusively with zpool (and more specifically, X13) but not always, I get insane profit quotes and my rig will switch to mining trash coins at very low hashrates. I have whattomine, coincalculators, and cointomine as statistics sources. Today, for instance, my actual hashrate and profit got totally derailed by a $1,069/hr 16.00 MH/s (!!!! seriously?) quote that swapped all my algo's for about 20 minutes until I caught it. I have tried blacklisting but I kind of prefer not to do that and the inline ignore option only allows for 24hrs at a time if I wanted to cherry pick (and I'm not going to pretend I can predict for all future scenarios what algos/coins/pools I would need to blacklist, anyways). Can anyone explain why this happens, and how to avoid it?

Thanks

side note: to get it to run by default, I had to modify the command line for ccminer alexis to add -i 20 because it was giving memory errors and bricking my mining whenever switcher picked a ccminer algo (in this case on a 1060 6gb). Is this a normal, known issue?

Hello and thanks for your questions. Please see this guide as a starting point:
https://support.awesomeminer.com/support/solutions/articles/35000086030-coin-and-profit-statistics

There can be cases where a pool reports unrealistic profit predictions but the good news is that Awesome Miner can use the two concepts "Actual payout" and "Volatility" to at least make it less likely to run into these problems.

[yrk1957]

After last update AWM no longer starts. This is in the Windows event viewer:

Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: AwesomeMiner.exe
P2: 8.4.9.0
P3: 609ce111
P4: AwesomeMiner
P5: 8.4.9.0
P6: 609ce111
P7: 2457
P8: 2a
P9: System.TypeLoadException
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER45D7.tmp.WERInternalMetadata.xml

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_AwesomeMiner.exe_dd5ca44aca13578725177894daf9ad3b66827c_1bb448e8_9500511e-2a99-4775-97a7-b0c5f5aa24e4

Analysis symbol:
Rechecking for solution: 0
Report Id: 4eb96e40-49b5-4c71-ae66-c546cf8c8069
Report Status: 100
Hashed bucket:
Cab Guid: 0

[patrike]

After last update AWM no longer starts. This is in the Windows event viewer:

Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: AwesomeMiner.exe
P2: 8.4.9.0
P3: 609ce111
P4: AwesomeMiner
P5: 8.4.9.0
P6: 609ce111
P7: 2457
P8: 2a
P9: System.TypeLoadException
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER45D7.tmp.WERInternalMetadata.xml

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_AwesomeMiner.exe_dd5ca44aca13578725177894daf9ad3b66827c_1bb448e8_9500511e-2a99-4775-97a7-b0c5f5aa24e4

Analysis symbol:
Rechecking for solution: 0
Report Id: 4eb96e40-49b5-4c71-ae66-c546cf8c8069
Report Status: 100
Hashed bucket:
Cab Guid: 0

1) Uninstall Awesome Miner
2) Manually remove any old remaining DLL-files located in the folder:
C:\Program Files (x86)\Awesome Miner
3) Install the same version again:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi

[yrk1957]

After last update AWM no longer starts. This is in the Windows event viewer:

Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: AwesomeMiner.exe
P2: 8.4.9.0
P3: 609ce111
P4: AwesomeMiner
P5: 8.4.9.0
P6: 609ce111
P7: 2457
P8: 2a
P9: System.TypeLoadException
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER45D7.tmp.WERInternalMetadata.xml

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_AwesomeMiner.exe_dd5ca44aca13578725177894daf9ad3b66827c_1bb448e8_9500511e-2a99-4775-97a7-b0c5f5aa24e4

Analysis symbol:
Rechecking for solution: 0
Report Id: 4eb96e40-49b5-4c71-ae66-c546cf8c8069
Report Status: 100
Hashed bucket:
Cab Guid: 0

1) Uninstall Awesome Miner
2) Manually remove any old remaining DLL-files located in the folder:
C:\Program Files (x86)\Awesome Miner
3) Install the same version again:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi

That fixed it, thanks!

[DigitalFox]

When in Options I select Pools, choose a pool and go to Pool balance, the Enable checkbox is grayed out and I can't enter pool's API for balance monitoring. How can I fix that?

[patrike]

When in Options I select Pools, choose a pool and go to Pool balance, the Enable checkbox is grayed out and I can't enter pool's API for balance monitoring. How can I fix that?

Thanks for your question. All mining pools have their own ways of providing a balance API (if they provide it at all). The checkbox will only be available for the pools where Awesome Miner do support reading the pool balance.