[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Dear Patrike,

we have some DR5-Miners running - but we cannot choose Decred and don't get any turnover?
is there something wrong with the statistic Providers?
in the options-coins Decred is shown?!

BR Ralf

Hi Ralf,

Decred should be listed in Awesome Miner by default. Isn't it listed in the Coins tab?

Is it a correct understanding that Decred is listed in the Options dialog, Coins section? Is it also listed in the Coins tab of the main windows?

Please go to the Options dialog, Algorithms section and make sure "Decred" is enabled.

[1714792671]

1714792671

[1714792671]

1714792671

[1714792671]

1714792671

[1714792671]

1714792671

[ralf007at]

Dear Patrike,

we have some DR5-Miners running - but we cannot choose Decred and don't get any turnover?
is there something wrong with the statistic Providers?
in the options-coins Decred is shown?!

BR Ralf

Hi Ralf,

Decred should be listed in Awesome Miner by default. Isn't it listed in the Coins tab?

Is it a correct understanding that Decred is listed in the Options dialog, Coins section? Is it also listed in the Coins tab of the main windows?

Please go to the Options dialog, Algorithms section and make sure "Decred" is enabled.

it was not enabled in the Algorithms section - thank you - that helped...

BR Ralf

[patrike]

Version 8.7.5 ( Development preview of 8.8 )

 Features
  - New rule trigger: Global offline detection, to trigger based on the number of offline miners in total
  - Device Temperature trigger improved to be able to detect GPU memory temperature
  - Miner graphs can display the history for the last 30 days
  - Improved display of relevant Whatsminer error codes
  - Web: Display of miner notes
 Integration
  - Improved coin balance support for Ethermine/Flypool
 Mining software
  - T-Rex Miner 0.23.2
  - TeamBlackMiner 1.09
  - Nanominer 3.3.12
  - NbMiner 39.5
  - XmRig 6.15.1
  - Gminer 2.69

[slysir]

Version 8.7.5 ( Development preview of 8.8 )

 Features
  - New rule trigger: Global offline detection, to trigger based on the number of offline miners in total
  - Device Temperature trigger improved to be able to detect GPU memory temperature
  - Miner graphs can display the history for the last 30 days
  - Improved display of relevant Whatsminer error codes
  - Web: Display of miner notes
 Integration
  - Improved coin balance support for Ethermine/Flypool
 Mining software
  - T-Rex Miner 0.23.2
  - TeamBlackMiner 1.09
  - Nanominer 3.3.12
  - NbMiner 39.5
  - XmRig 6.15.1
  - Gminer 2.69

Nanominer 3.3.12 shows no console output. Just blank terminal.

[sxemini]

Version 8.7.5 ( Development preview of 8.8 )

 Features
  - New rule trigger: Global offline detection, to trigger based on the number of offline miners in total
  - Device Temperature trigger improved to be able to detect GPU memory temperature
  - Miner graphs can display the history for the last 30 days
  - Improved display of relevant Whatsminer error codes
  - Web: Display of miner notes
 Integration
  - Improved coin balance support for Ethermine/Flypool
 Mining software
  - T-Rex Miner 0.23.2
  - TeamBlackMiner 1.09
  - Nanominer 3.3.12
  - NbMiner 39.5
  - XmRig 6.15.1
  - Gminer 2.69

Nanominer 3.3.12 shows no console output. Just blank terminal.

For me it shows the console output. You run Nanominer in admin mode? Then it show no console output only.

[crazydane]

TeamBlackMiner 1.10 was released yesterday that introduced API.

[patrike]

Nanominer 3.3.12 shows no console output. Just blank terminal.

For me it shows the console output. You run Nanominer in admin mode? Then it show no console output only.

Same here - for Admin mode the output is empty but otherwise it should be fine.

[patrike]

TeamBlackMiner 1.10 was released yesterday that introduced API.

Yes, I looked into it earlier today but it didn't work (can be enabled, but doesn't respond to requests). I will give it a try on another system as well to see.

[sp_]

TeamBlackMiner 1.10 was released yesterday that introduced API.

Yes, I looked into it earlier today but it didn't work (can be enabled, but doesn't respond to requests). I will give it a try on another system as well to see.

It's just missing the http header, so wont work in browser or with curl. We added it into the linux build. Will be included in v1.11

[patrike]

TeamBlackMiner 1.10 was released yesterday that introduced API.

Yes, I looked into it earlier today but it didn't work (can be enabled, but doesn't respond to requests). I will give it a try on another system as well to see.

It's just missing the http header, so wont work in browser or with curl. We added it into the linux build. Will be included in v1.11

Thanks for your quick response. Sounds great - I will integrate this as soon as possible as I'm getting many requests about TeamBlackMiner now.

[patrike]

Inn Options->Mining Settings there is an option to "Use Ctrl+C event for closing miner process" This does not seem to work anymore.

example T-rex : If you use any coreclock lock settings, they are not dropped. T-rex is not exited properly.
 Instead of showing: Main loop finished. Cleaning up resources...
                               T-Rex finished.
 It seems to just be killed. That means that when you fire up another miner , the core clock in t-rex still exists so oc in that application is all over the place.

If I remote inn to a miner and do Ctrl+C the core clock lock is dropped and the exit is done correctly.
Hope this is fixed easily, or maybe there is an workaround for this ?

Could this be related to that you run the T-Rex miner process as Administrator? In that case I think Windows will block you from sending Ctrl+C to the process.

[patrike]

Version 8.7.6 ( Development preview of 8.8 )

 ASIC mining
  - Improved detection of Innosilicon ASIC miner types
 Features
  - Added display currency: Singapore Dollar
  - The information column can display Profit Profile
  - Find feature improved to include additional properties to be searched for
  - Quick filter feature improved to allow selection of property to be search for
  - Web proxy feature supported via cloud connected Remote Proxy
  - Display of Energy Consumption (kWh) for each miner in the Mining History
 Web
  - Configurable columns to display
  - Information column can be displayed
  - Improve notification list view on mobile devices
  - Added display of miner tags
  - Include miner tag filter
  - Improved miner filter user interface  
 API
  - User rule API: Added API for getting a list of all user defined rules
  - User rule API: Set a user defined rule to either enabled or disabled
  - Include tag details for the API endpoint /api/miners
 Configuration
  - Cloud connection for Remote Agent can also be setup for Windows service mode using the Remote Service Config tool
 Mining software
  - TeamBlackMiner 1.10
  - Gminer 2.70
  - Lolminer 1.33
 Corrections
  - Correction to calculaction of energy consumption when exporting mining history to CSV
  - Correction to power off operation for specific Whatsminer ASIC miners


Update: TeamBlackMiner 1.11 was released shortly after this Awesome Miner release. There will be a new Awesome Miner release tomorrow where the API integration (display of hashrate and more) with TeamBlackMiner 1.11 will be included.

[patrike]

Version 8.7.7 ( Development preview of 8.8 )

 Web
  - Updated UI for filter selection
 Mining software
  - TeamBlackMiner 1.11, including API integration to show hashrate in Awesome Miner
 Correction
  - Correction to Telegram and SMS messages for Global triggers

[sp_]

Whats the ETA on 8.8 ?

[patrike]

Whats the ETA on 8.8 ?

Thanks for your question. The release will most likely be renamed to Awesome Miner 9.0 once made available to the public. The plan is to make a public release during next week.

Users of Awesome Miner can already today upgrade to development version 8.7.7 and use TeamBlackMiner with the API integration. To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

[patrike]

Version 8.7.8 ( Development preview of 8.8 )

 ASIC mining
  - Whatsminer power mode can be configured
  - Display voltage per device when using Awesome Miner Antminer L3+ firmware
 Features
  - Include additional fields in the Mining history CSV export
  - Virtual Group configuration includes a filter to show only selected groups and miners
 Web
  - Edit miner notes
 API
  - API endpoint for setting Whatsminer power mode
 Mining software
  - XmRig 6.15.2
  - Nanominer 3.3.13
  - TeamRedMiner 0.8.6
  - T-Rex miner 0.24

[narousberg]

Inn Options->Mining Settings there is an option to "Use Ctrl+C event for closing miner process" This does not seem to work anymore.

example T-rex : If you use any coreclock lock settings, they are not dropped. T-rex is not exited properly.
 Instead of showing: Main loop finished. Cleaning up resources...
                               T-Rex finished.
 It seems to just be killed. That means that when you fire up another miner , the core clock in t-rex still exists so oc in that application is all over the place.

If I remote inn to a miner and do Ctrl+C the core clock lock is dropped and the exit is done correctly.
Hope this is fixed easily, or maybe there is an workaround for this ?

Could this be related to that you run the T-Rex miner process as Administrator? In that case I think Windows will block you from sending Ctrl+C to the process.

You are right, had to enable adminmode to turn on coreclock lock. Damn it. Well the hunt for a workaround begins...

If your rig OS is Linux (dont know a Windows syntaxis), then you can simple use a "Batch commands" in Profit profile for each algo where you want set fixed core clocks. Work with any miners software. Commands like this:
Before start: sudo nvidia-smi -lgc 1545,1545
After stoping: sudo nvidia-smi -rgc
Enjoy

[crazydane]

Any chance of adding CoinGecko as a Statistics Provider so that we can pull in coins like Raptoreum that is not listed on any of the existing providers from what I can tell.

You already have the Ghostrider algo, just not the coin, so I don't seem to be able to CPU mine Raptoreum properly at the moment using AM.

[narousberg]

Hi

Does the latest version of awesome miner include the new dual mining capabilities of t-rex?

Like when you set up a managed miner can you select dual mining for t-rex instead of manually adding the dual mining arguments in the command line section?

Thanks

looks like this dual mining with t-rex is less profitable compare to 71%-81% standart LHR unlock. You will lost more profit if your second algo is power hungry algo like Kawpow or Octopus. After many tests lolminer 1.33 is a winner for me. tested with 3060 v. 1.0

[sxemini]

Any chance of adding CoinGecko as a Statistics Provider so that we can pull in coins like Raptoreum that is not listed on any of the existing providers from what I can tell.

You already have the Ghostrider algo, just not the coin, so I don't seem to be able to CPU mine Raptoreum properly at the moment using AM.

Add it by yourself like i did. I use coingecko to get all data. You can also add your own icon for raptoreum. And to mine rtm on am, it is not needed to add the coin by the way.

@patrike

is it possible to see in the future both hashrates when we dual mining with t-rex. maybe like claymore dual mining in the past?
More dual miner incoming so i hope to see both hashrates in the future -> srbmulti miner also work on dual mining option for epic cash (only 38% mining time used -> like zil only use 5% mining time)