dac10
|
|
July 03, 2016, 01:35:55 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. My wallet v1.1.3 crashed to 65000 blocks, I must add nodes?
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 03, 2016, 04:44:46 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. My wallet v1.1.3 crashed to 65000 blocks, I must add nodes? You can find a list of nodes to add here: http://www.presstab.pw/phpexplorer/HYP/nodes.php
|
|
|
|
dac10
|
|
July 03, 2016, 07:39:22 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. My wallet v1.1.3 crashed to 65000 blocks, I must add nodes? You can find a list of nodes to add here: http://www.presstab.pw/phpexplorer/HYP/nodes.phpJust installed v1.1.3 went with 1,2,3 connected, now there are no connections, so there is no sync. The nodes list Knew! But the wallet update is required? Thanks!
|
|
|
|
joef
Member
Offline
Activity: 93
Merit: 10
|
|
July 04, 2016, 09:13:18 AM |
|
Hi presstab, while I like your explorer page, the "Annulized Stake Rate" chart is quite misleading. The chart assumes an average stake rate of 200%. But that is not the case. The average stake rate is currently less than 60% only. Calculation: current supply: 583,306,124 HYP blocks/year: 960 * 365 = 350,400 Assuming each block gets the max 1000 HYP, we will mine 350,400,000 HYP per year.
100 * 350,400,000 HYP / 583,306,124 HYP = 60,07%
Not each block will mine 1000 HYP, so the real percentage is even lower. While the supply is increasing and the yield is fixed, the percentage will go down a bit each day.
It would be great, if you may present a chart with such data.
Thanks
|
|
|
|
RiotMachine
Member
Offline
Activity: 80
Merit: 10
|
|
July 04, 2016, 10:01:02 PM |
|
Hi presstab, while I like your explorer page, the "Annulized Stake Rate" chart is quite misleading. The chart assumes an average stake rate of 200%. But that is not the case. The average stake rate is currently less than 60% only. Calculation: current supply: 583,306,124 HYP blocks/year: 960 * 365 = 350,400 Assuming each block gets the max 1000 HYP, we will mine 350,400,000 HYP per year.
100 * 350,400,000 HYP / 583,306,124 HYP = 60,07%
Not each block will mine 1000 HYP, so the real percentage is even lower. While the supply is increasing and the yield is fixed, the percentage will go down a bit each day.
It would be great, if you may present a chart with such data.
Thanks
Great information Joef, thank you for posting!
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 04, 2016, 11:10:52 PM |
|
Hi presstab, while I like your explorer page, the "Annulized Stake Rate" chart is quite misleading. The chart assumes an average stake rate of 200%. But that is not the case. The average stake rate is currently less than 60% only. Calculation: current supply: 583,306,124 HYP blocks/year: 960 * 365 = 350,400 Assuming each block gets the max 1000 HYP, we will mine 350,400,000 HYP per year.
100 * 350,400,000 HYP / 583,306,124 HYP = 60,07%
Not each block will mine 1000 HYP, so the real percentage is even lower. While the supply is increasing and the yield is fixed, the percentage will go down a bit each day.
It would be great, if you may present a chart with such data.
Thanks
You are confusing 'stake rate' and the 'coin supply inflation rate'. Two totally different things. But I will see if I can add an inflation chart as well.
|
|
|
|
dac10
|
|
July 06, 2016, 07:08:29 PM |
|
This time it gave me "blkindex error", wallet v.1.1.3 still stuck! He went a few days, now you are stuck! Presstab, solutions? Thanks!
|
|
|
|
dac10
|
|
July 06, 2016, 09:22:52 PM |
|
This time it gave me "blkindex error", wallet v.1.1.3 still stuck! He went a few days, now you are stuck! Presstab, solutions? Thanks!
I watched the IONcoin=56 connections for stake, HyperStake= 0 connections...Hei dev?
|
|
|
|
Trololoh
|
|
July 06, 2016, 09:56:58 PM |
|
This time it gave me "blkindex error", wallet v.1.1.3 still stuck! He went a few days, now you are stuck! Presstab, solutions? Thanks!
I watched the IONcoin=56 connections for stake, HyperStake= 0 connections...Hei dev? Have you followed the intructions of the op ? (You don't need nodes for bootstrapping.) Nodes - http://www.presstab.pw/phpexplorer/HYP/nodes.phpSyncing Notice: When syncing the chain, the client can get stuck occasionally and need to be restarted in order to continue syncing. Please consider using the bootstrap for the quickest sync. Block Chain Bootstrap Bootstrap file updated every hour - http://hyperstrap.ml/ Usage: extract bootstrap.dat into data directory (for Windows go to "run" and type in %appdata% and find HyperStake folder), remove blkindex.dat and blk0001.dat. When you fire up your QT wallet, it will automatically detect the bootstrap and begin to work. Bootstrapping may take an hour or two depending on the machine, please be patient, the bootstrap happens from the splashscreen, and clicking on it while bootstrapping may cause it to quit. Please note that it is common for the bootstrap to load 90k or so blocks at a time and jump out of bootstrap mode (fixed in v1.1.3). If you client does this, simply turn it off. Go back to your datadir and rename bootstrap.dat.old to bootstrap.dat and restart your client, it will pick up where it left off. If you are using the daemon you will need to enter the following startup switch: ./hyperstaked -loadblock=bootstrap.dat
|
|
|
|
Trololoh
|
|
July 06, 2016, 10:04:28 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. Smooth running also on my end. No issues bootstrapping, although it took 16 hrs. P.s.Windows users don't like daemons or ghosts in their machines it causes too much stress ending in severe paranoid mental state.
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 06, 2016, 10:24:57 PM |
|
This time it gave me "blkindex error", wallet v.1.1.3 still stuck! He went a few days, now you are stuck! Presstab, solutions? Thanks!
See Trololoh's quote from the OP. Grab the latest bootstrap and it will catch you up. If you have a hard time getting nodes, then use the long list of nodes from the link provided.
|
|
|
|
Biomech
Legendary
Offline
Activity: 1372
Merit: 1022
Anarchy is not chaos.
|
|
July 06, 2016, 11:22:15 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. Smooth running also on my end. No issues bootstrapping, although it took 16 hrs. P.s.Windows users don't like daemons or ghosts in their machines it causes too much stress ending in severe paranoid mental state. ..and yet they trust wizards...
|
|
|
|
CiZ
Member
Offline
Activity: 81
Merit: 10
HyperStake Member
|
|
July 07, 2016, 12:47:05 AM |
|
What ?? How to fix this problem
|
.I'm CiZ my HyperStake Member.
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 07, 2016, 01:22:01 AM |
|
What ?? How to fix this problem Follow the instructions here: New release v1.1.3 is out. https://github.com/hyperstake/HyperStake/releases/tag/v1.1.3Warning that this will require a resyncing of the blockchain. 1. Backup your wallet.dat to a secure location. 2. Delete the following from the datadirectory: - database folder - blkindex.dat 3. Rename blk0001.dat to bootstrap.dat 4. Restart the new HyperStake client and wait for the bootstrap process to complete, this will likely take a few hours. Changelog - allow spending of unconfirmed utxo's if they are your own - reduce QT resource consumption via requesting less updates - add block hash to blockindex to speed up bootup (WARNING requires resync) - optimize bootstrapping so that the client does not get hung up on orphans - speed up coin control dialog - close socket leaks
|
|
|
|
Trololoh
|
|
July 10, 2016, 03:05:17 PM |
|
v1.1.3 is very smooth running wallet indeed (wish more pos coins had one)
can't tell for socket leaks but everything else in changelog checks out perfectly
Glad to hear thanks for reporting back. Smooth running also on my end. No issues bootstrapping, although it took 16 hrs. P.s.Windows users don't like daemons or ghosts in their machines it causes too much stress ending in severe paranoid mental state. ..and yet they trust wizards... Wizards are cool... Harry Potter, Merlin, and the one from Oz just to mention a few. Meanwhile HYP is doing very well on Poly and is doing so for quite a while now. Nice !
|
|
|
|
cryptonikus
|
|
July 10, 2016, 03:08:31 PM |
|
so what is reason for such huge surge in price?
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 10, 2016, 05:58:13 PM |
|
so what is reason for such huge surge in price?
My theory is that it is the only high rate PoS coin that trades on Poloniex. There seems to be new money heading into PoS coins.
|
|
|
|
Spjer
Member
Offline
Activity: 71
Merit: 10
|
|
July 11, 2016, 11:00:38 AM |
|
I just want to open the Hyperstake Client next to the Truckcoin client! I remember i have to write one line in properties of the shortcut, something with the port, but dont know anymore... Who can help me please? Thanks in advance!
|
|
|
|
sparksi
|
|
July 11, 2016, 11:34:17 AM |
|
I just want to open the Hyperstake Client next to the Truckcoin client! I remember i have to write one line in properties of the shortcut, something with the port, but dont know anymore... Who can help me please? Thanks in advance! I don't know the command, but one option is to run other wallet in Sandbox.
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 11, 2016, 03:41:37 PM |
|
I just want to open the Hyperstake Client next to the Truckcoin client! I remember i have to write one line in properties of the shortcut, something with the port, but dont know anymore... Who can help me please? Thanks in advance! Just change your rpcport in the conf file. "rpcport=13654" for example.
|
|
|
|
|