[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[unsoindovo]

It uses the current baseTarget to do the calculations, so: Not 100% accurate.




So with 24TB, how much you can earn in 24 hours?

Roughly $50/day at current rates.

much more

0.15 btc aren't 50 dollars

About $ 57!  

x 30 day = 1701$!


I have other solutions to be 36 or 72 tb! But first I want to try 24!

remenber!

you are not considering the difficulty increase!!!!

[1715049592]

1715049592

[1715049592]

1715049592

[1715049592]

1715049592

[1715049592]

1715049592

[1715049592]

1715049592

[victorteoh]

It uses the current baseTarget to do the calculations, so: Not 100% accurate.




So with 24TB, how much you can earn in 24 hours?

Roughly $50/day at current rates.

much more

0.15 btc aren't 50 dollars

About $ 57!  

x 30 day = 1701$!


I have other solutions to be 36 or 72 tb! But first I want to try 24!

remenber!

you are not considering the difficulty increase!!!!

and the price fluctuation

[Amph]

2 x Intel Xeon
E5 2620V2
2 x (6 x 2,10 GHz)

128 GB REG ECC

1 Gbit/s port

is Enough?

how many nonce per minute with those?

[alphateam]

2 x Intel Xeon
E5 2620V2
2 x (6 x 2,10 GHz)

128 GB REG ECC

1 Gbit/s port

is Enough?

how many nonce per minute with those?

Nearly 10 000 i think, so nearly 6 days for 24tb

[deevilknight]

Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say  {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance

[alphateam]

Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say  {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance

You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some

[deevilknight]

Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say  {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance

You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some

Thank you 

[crowetic]

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Well done! Everyone hop on the multi pool!!!

I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.

[crowetic]

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Well done! Everyone hop on the multi pool!!!

I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.

I just checked, and my ant that I pointed is mining away! Awesome, time to throw the other one there now! Then maybe some x gpus as well.

[cad_cdn]

I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working .

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Well done! Everyone hop on the multi pool!!!

I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.

[wmikrut]

So just a q I have had trouble finding an answer to.
Plot generation... got it. No overlapping nonces.

So let's say I have three HDDs and I am too lazy to make that one big disk.
I could generate plots on each disk (keeping nonces unique).

Do I then solo mine three clients (one for each disk).
So for example I have :

d:\pocminer_v1\plots
e:\pocminer_v1\plots
f:\pocminer_v1\plots

If I were to pool mine, would I also need to run three clients... one on each disk?
Thank you!

[ltcnim]

is it possible to import the key from one wallet to another? So that I have two keys in one wallet afterwards?

[crowetic]

I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working .

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Well done! Everyone hop on the multi pool!!!

I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.

I am up and running, have almost a terahash there of SHA.

[Matt9301]

So just a q I have had trouble finding an answer to.
Plot generation... got it. No overlapping nonces.

So let's say I have three HDDs and I am too lazy to make that one big disk.
I could generate plots on each disk (keeping nonces unique).

Do I then solo mine three clients (one for each disk).
So for example I have :

d:\pocminer_v1\plots
e:\pocminer_v1\plots
f:\pocminer_v1\plots

If I were to pool mine, would I also need to run three clients... one on each disk?
Thank you!

You must run 3 instance.. 1 for each hdd

[Cobra]

So just a q I have had trouble finding an answer to.
Plot generation... got it. No overlapping nonces.

So let's say I have three HDDs and I am too lazy to make that one big disk.
I could generate plots on each disk (keeping nonces unique).

Do I then solo mine three clients (one for each disk).
So for example I have :

d:\pocminer_v1\plots
e:\pocminer_v1\plots
f:\pocminer_v1\plots

If I were to pool mine, would I also need to run three clients... one on each disk?
Thank you!

You must run 3 instance.. 1 for each hdd

Unless you create a symlink (google it) which will allow you to have several drives appear as one logical drive. In that case you can use one miner for solo or pool.

[crowetic]

I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working .

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Well done! Everyone hop on the multi pool!!!

I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.

I am up and running, have almost a terahash there of SHA.

However, the stats page doesn't seem to work, and I have no way of telling if I am actually gaining anything or not. All I know is that I am connected, and sending 900 mh or so of SHA, which will soon increase.

[Sglasio]

tell me please. My HDD in exFAT format, and mklink can't created. exFAT i create for VM (ubuntu)
and now i don't know what do(((
I can use hdd in windows, but can't create mklink(((
Can't convert to NTFS (Paragon and Acronis) (

[tex81]

hey guys.is there still that program that calculate your plot size before starting them

number of nonces * 256 / 1.000.000 = size in Gb

PlotSize (GB) = NumberOfNonces / 4096
NumberOfNonces = PlotSize (GB) * 4096

your formula gives a rough estimation, the one posted by me it`s more... exact (file on disk size).

1**********************9_60000000_40960_40960 - 10Gb (your version) - 10.485Gb (mine)

1GB is 1024*1024 kB. Your formula is wrong. Just check any one plotfile.

are you sure ?

Of course I'm sure. 10485760kB = 10240MB = 10GB. It`s a basics, bro!

wtf are you talking about, bro ? you realize that filesize is not the same as size on disk and it makes a HUGE difference when you plan your plot file, right bro ?

let me give you a hint... 100G on paper equals to about 107Gb on disk, so i`ll strongly advise to calculate file size using the formula I`ve written above because it`s not theoretical.

99328 nonces in file /4096 = 24.25 GB
Filesize: 26 038 239 232 bytes /1024 /1024 /1024 = 24.25 GB
On disk: same size
Even whole folder sizes are the same.
What am I doing wrong?  

[HunterS]

hey guys.can anyone tell me why i keep getting "unable to get mining info from wallet" and "failed to submit nonce" errors on v2 pool.i have tried changing port to 80 .i am submitting shares and getting payouts just wondering if this will affect my payouts.

[timk225]

What sort of cpu operations are involved in plotting?  Integer?  Floating point?  How are the better AMD 6 and 8 core cpus doing in nonces per minute compared to the better intel i3 / i5 / i7's?