unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
September 08, 2014, 01:13:58 PM |
|
It uses the current baseTarget to do the calculations, so: Not 100% accurate. So with 24TB, how much you can earn in 24 hours? Roughly $50/day at current rates. much more 0.15 btc aren't 50 dollars About $ 57! x 30 day = 1701$! I have other solutions to be 36 or 72 tb! But first I want to try 24! remenber! you are not considering the difficulty increase!!!!
|
|
|
|
victorteoh
Sr. Member
Offline
Activity: 334
Merit: 250
🌟 æternity🌟 blockchain🌟
|
|
September 08, 2014, 01:14:59 PM |
|
It uses the current baseTarget to do the calculations, so: Not 100% accurate. So with 24TB, how much you can earn in 24 hours? Roughly $50/day at current rates. much more 0.15 btc aren't 50 dollars About $ 57! x 30 day = 1701$! I have other solutions to be 36 or 72 tb! But first I want to try 24! remenber! you are not considering the difficulty increase!!!! and the price fluctuation
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
September 08, 2014, 01:21:51 PM |
|
2 x Intel Xeon E5 2620V2 2 x (6 x 2,10 GHz) 128 GB REG ECC 1 Gbit/s port is Enough? how many nonce per minute with those?
|
|
|
|
alphateam
|
|
September 08, 2014, 01:25:08 PM |
|
2 x Intel Xeon E5 2620V2 2 x (6 x 2,10 GHz) 128 GB REG ECC 1 Gbit/s port is Enough? how many nonce per minute with those? Nearly 10 000 i think, so nearly 6 days for 24tb
|
|
|
|
deevilknight
Jr. Member
Offline
Activity: 37
Merit: 10
|
|
September 08, 2014, 01:36:14 PM |
|
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
|
|
|
|
alphateam
|
|
September 08, 2014, 01:37:39 PM |
|
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some
|
|
|
|
deevilknight
Jr. Member
Offline
Activity: 37
Merit: 10
|
|
September 08, 2014, 01:48:09 PM |
|
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some Thank you
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
September 08, 2014, 01:55:28 PM |
|
Looking for miners (ASIC ones especially!) http://burstmultipool.com! scrypt: stratum+tcp://pool.burstmultipool.com:3333 sha: stratum+tcp://pool.burstmultipool.com:5555 x11: stratum+tcp://pool.burstmultipool.com:4444 Keccak: stratum+tcp://pool.burstmultipool.com:6666 scrypt-n: stratum+tcp://pool.burstmultipool.com:2222Well done! Everyone hop on the multi pool!!! I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
September 08, 2014, 02:03:24 PM |
|
Looking for miners (ASIC ones especially!) http://burstmultipool.com! scrypt: stratum+tcp://pool.burstmultipool.com:3333 sha: stratum+tcp://pool.burstmultipool.com:5555 x11: stratum+tcp://pool.burstmultipool.com:4444 Keccak: stratum+tcp://pool.burstmultipool.com:6666 scrypt-n: stratum+tcp://pool.burstmultipool.com:2222Well done! Everyone hop on the multi pool!!! I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks. I just checked, and my ant that I pointed is mining away! Awesome, time to throw the other one there now! Then maybe some x gpus as well.
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
cad_cdn
|
|
September 08, 2014, 02:03:51 PM |
|
I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working . Looking for miners (ASIC ones especially!) http://burstmultipool.com! scrypt: stratum+tcp://pool.burstmultipool.com:3333 sha: stratum+tcp://pool.burstmultipool.com:5555 x11: stratum+tcp://pool.burstmultipool.com:4444 Keccak: stratum+tcp://pool.burstmultipool.com:6666 scrypt-n: stratum+tcp://pool.burstmultipool.com:2222Well done! Everyone hop on the multi pool!!! I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
|
|
|
|
wmikrut
|
|
September 08, 2014, 02:04:42 PM |
|
So just a q I have had trouble finding an answer to. Plot generation... got it. No overlapping nonces.
So let's say I have three HDDs and I am too lazy to make that one big disk. I could generate plots on each disk (keeping nonces unique).
Do I then solo mine three clients (one for each disk). So for example I have :
d:\pocminer_v1\plots e:\pocminer_v1\plots f:\pocminer_v1\plots
If I were to pool mine, would I also need to run three clients... one on each disk? Thank you!
|
I will NEVER ask for any kind of funds up front in a buy/sale of anything on bitcointalk.
BM-2cTFihJKmSwusMAoYuUHPvpx56Jozv64KK
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
September 08, 2014, 02:05:19 PM |
|
is it possible to import the key from one wallet to another? So that I have two keys in one wallet afterwards?
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
September 08, 2014, 02:09:09 PM |
|
I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working . Looking for miners (ASIC ones especially!) http://burstmultipool.com! scrypt: stratum+tcp://pool.burstmultipool.com:3333 sha: stratum+tcp://pool.burstmultipool.com:5555 x11: stratum+tcp://pool.burstmultipool.com:4444 Keccak: stratum+tcp://pool.burstmultipool.com:6666 scrypt-n: stratum+tcp://pool.burstmultipool.com:2222Well done! Everyone hop on the multi pool!!! I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks. I am up and running, have almost a terahash there of SHA.
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
Matt9301
Legendary
Offline
Activity: 1652
Merit: 1009
|
|
September 08, 2014, 02:09:27 PM |
|
So just a q I have had trouble finding an answer to. Plot generation... got it. No overlapping nonces.
So let's say I have three HDDs and I am too lazy to make that one big disk. I could generate plots on each disk (keeping nonces unique).
Do I then solo mine three clients (one for each disk). So for example I have :
d:\pocminer_v1\plots e:\pocminer_v1\plots f:\pocminer_v1\plots
If I were to pool mine, would I also need to run three clients... one on each disk? Thank you!
You must run 3 instance.. 1 for each hdd
|
|
|
|
Cobra
|
|
September 08, 2014, 02:12:27 PM |
|
So just a q I have had trouble finding an answer to. Plot generation... got it. No overlapping nonces.
So let's say I have three HDDs and I am too lazy to make that one big disk. I could generate plots on each disk (keeping nonces unique).
Do I then solo mine three clients (one for each disk). So for example I have :
d:\pocminer_v1\plots e:\pocminer_v1\plots f:\pocminer_v1\plots
If I were to pool mine, would I also need to run three clients... one on each disk? Thank you!
You must run 3 instance.. 1 for each hdd Unless you create a symlink (google it) which will allow you to have several drives appear as one logical drive. In that case you can use one miner for solo or pool.
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
September 08, 2014, 02:13:42 PM |
|
I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working . Looking for miners (ASIC ones especially!) http://burstmultipool.com! scrypt: stratum+tcp://pool.burstmultipool.com:3333 sha: stratum+tcp://pool.burstmultipool.com:5555 x11: stratum+tcp://pool.burstmultipool.com:4444 Keccak: stratum+tcp://pool.burstmultipool.com:6666 scrypt-n: stratum+tcp://pool.burstmultipool.com:2222Well done! Everyone hop on the multi pool!!! I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks. I am up and running, have almost a terahash there of SHA. However, the stats page doesn't seem to work, and I have no way of telling if I am actually gaining anything or not. All I know is that I am connected, and sending 900 mh or so of SHA, which will soon increase.
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
Sglasio
|
|
September 08, 2014, 02:15:14 PM |
|
tell me please. My HDD in exFAT format, and mklink can't created. exFAT i create for VM (ubuntu) and now i don't know what do((( I can use hdd in windows, but can't create mklink((( Can't convert to NTFS (Paragon and Acronis) (
|
|
|
|
tex81
|
|
September 08, 2014, 02:15:39 PM |
|
hey guys.is there still that program that calculate your plot size before starting them
number of nonces * 256 / 1.000.000 = size in Gb PlotSize (GB) = NumberOfNonces / 4096 NumberOfNonces = PlotSize (GB) * 4096 your formula gives a rough estimation, the one posted by me it`s more... exact (file on disk size). 1**********************9_60000000_40960_40960 - 10Gb (your version) - 10.485Gb (mine) 1GB is 1024*1024 kB. Your formula is wrong. Just check any one plotfile. are you sure ? Of course I'm sure. 10485760kB = 10240MB = 10GB. It`s a basics, bro! wtf are you talking about, bro ? you realize that filesize is not the same as size on disk and it makes a HUGE difference when you plan your plot file, right bro ? let me give you a hint... 100G on paper equals to about 107Gb on disk, so i`ll strongly advise to calculate file size using the formula I`ve written above because it`s not theoretical. 99328 nonces in file /4096 = 24.25 GB Filesize: 26 038 239 232 bytes /1024 /1024 /1024 = 24.25 GB On disk: same size Even whole folder sizes are the same. What am I doing wrong?
|
Russia
|
|
|
HunterS
|
|
September 08, 2014, 02:16:13 PM |
|
hey guys.can anyone tell me why i keep getting "unable to get mining info from wallet" and "failed to submit nonce" errors on v2 pool.i have tried changing port to 80 .i am submitting shares and getting payouts just wondering if this will affect my payouts.
|
|
|
|
timk225
|
|
September 08, 2014, 02:17:00 PM |
|
What sort of cpu operations are involved in plotting? Integer? Floating point? How are the better AMD 6 and 8 core cpus doing in nonces per minute compared to the better intel i3 / i5 / i7's?
|
|
|
|
|