jediwashuu
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 02, 2017, 12:36:22 PM |
|
I have been with magi for over a year, I can probably wait longer! I am just looking to run the wallet so I can have a node going on my Pine64. Its small, and low power, so it could be really good for that. I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that) Has anyone tried running this on a Pine64? I have one with ROKOS v7 on it, and have successfully got it to attach to a NAS for a bitcoin node, and now i would like to do the same for a magicoin node. When i download the wallet from the website, it does not actually seem to open for me. Suggestions to make it open?
I guess there isn't well established process of running magi on Pine64. I recommend either compiling the daemon from source, or if you could stick to magi that far, I'll get this issue sorted out in the near future.
|
|
|
|
starmman
Legendary
Offline
Activity: 1484
Merit: 1029
|
|
February 02, 2017, 02:41:37 PM |
|
I have been with magi for over a year, I can probably wait longer! I am just looking to run the wallet so I can have a node going on my Pine64. Its small, and low power, so it could be really good for that. I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)
I'm planning at some point to make a pi build - not sure if that will help with a Pine64 or not. Magi price is looking very nice today
|
|
|
|
|
My9bot
|
|
February 02, 2017, 06:13:38 PM |
|
I have been with magi for over a year, I can probably wait longer! I am just looking to run the wallet so I can have a node going on my Pine64. Its small, and low power, so it could be really good for that. I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)
I'm planning at some point to make a pi build - not sure if that will help with a Pine64 or not. Magi price is looking very nice today Build your MagiCoin XMG Wallettested at pi2 sudo apt-get update sudo apt-get upgrade
sudo apt-get install -y gcc-4.9 g++-4.9 sudo apt-get install -y libgmp-dev libcurl4-openssl-dev libjansson-dev git
sudo apt-get install -y libdb5.3-dev libdb5.3++-dev sudo apt-get install -y libboost-all-dev sudo apt-get install -y libqrencode-dev sudo apt-get install -y libminiupnpc-dev libminiupnpc
for v1.3.0-RC : BRANCH="1.3.0rc" mkdir $BRANCH cd $BRANCH git init git remote add -t $BRANCH -f origin https://github.com/magi-project/magi.git git checkout $BRANCH
cd src/
Now edit your makefile.unix goto line 108 : ifeq ($(xCPUARCH),armv7l) and replace it with : ifeq ($(xCPUARCH),armv7l) xCXXFLAGS+=-Ofast -mcpu=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard
now build magid with : make -f makefile.unix xCPUARCH=armv7l
|
|
|
|
eule
|
|
February 02, 2017, 06:42:00 PM |
|
FYI around 20k XMG were lost when my hard drive crashed. Make backups! edit: Or was it 2k? Not sure anymore, which is the worst...
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
February 02, 2017, 06:51:10 PM |
|
FYI around 20k XMG were lost when my hard drive crashed. Make backups! edit: Or was it 2k? Not sure anymore, which is the worst... Wow. I'am very sorry to hear that. Indeed its very important to make backups.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
eule
|
|
February 02, 2017, 06:58:21 PM |
|
Shit happens, lesson learnt.
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
February 02, 2017, 07:02:33 PM |
|
Shit happens, lesson learnt. Yes thats right. I learnt the lessons with keeping the coins on exchanges like Cryptsy.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
starmman
Legendary
Offline
Activity: 1484
Merit: 1029
|
|
February 02, 2017, 07:55:02 PM |
|
...Pi BUILD INSTRUCTIONS SNIPPED...
Thank you very much for that My9bot - I've bookmarked this page for when I get around to the build =)
|
|
|
|
jediwashuu
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 03, 2017, 03:18:25 AM |
|
Thanks my9bot! does that create the miner daemon, or the wallet? I am looking to just have the wallet I have been with magi for over a year, I can probably wait longer! I am just looking to run the wallet so I can have a node going on my Pine64. Its small, and low power, so it could be really good for that. I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)
I'm planning at some point to make a pi build - not sure if that will help with a Pine64 or not. Magi price is looking very nice today Build your MagiCoin XMG Wallettested at pi2 sudo apt-get update sudo apt-get upgrade
sudo apt-get install -y gcc-4.9 g++-4.9 sudo apt-get install -y libgmp-dev libcurl4-openssl-dev libjansson-dev git
sudo apt-get install -y libdb5.3-dev libdb5.3++-dev sudo apt-get install -y libboost-all-dev sudo apt-get install -y libqrencode-dev sudo apt-get install -y libminiupnpc-dev libminiupnpc
for v1.3.0-RC : BRANCH="1.3.0rc" mkdir $BRANCH cd $BRANCH git init git remote add -t $BRANCH -f origin https://github.com/magi-project/magi.git git checkout $BRANCH
cd src/
Now edit your makefile.unix goto line 108 : ifeq ($(xCPUARCH),armv7l) and replace it with : ifeq ($(xCPUARCH),armv7l) xCXXFLAGS+=-Ofast -mcpu=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard
now build magid with : make -f makefile.unix xCPUARCH=armv7l
|
|
|
|
jediwashuu
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 03, 2017, 03:31:52 AM |
|
ok, i ran that code trying it for the Pine64. I still got the -msse2 error, so i commented that line out. the project built (it did take a while, it was running before i posted the last comment).
My problem is that nothing happens when i try to run the magid executable. no error, the program does seem to open, its not listed in task manager, etc. oh well. i may have to wait for the "official" pine64/arm build
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 03, 2017, 04:30:53 AM |
|
ok, i ran that code trying it for the Pine64. I still got the -msse2 error, so i commented that line out. the project built (it did take a while, it was running before i posted the last comment).
My problem is that nothing happens when i try to run the magid executable. no error, the program does seem to open, its not listed in task manager, etc. oh well. i may have to wait for the "official" pine64/arm build
Yeah, guess so. I'll get one and try to sort out a binary (and Pi too) as you're badly looking forward to it.
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 03, 2017, 04:33:40 AM |
|
The logo looks simple, yet gives a cleaner image of Coin Magi itself. I like it due to the simplicity of the same, while at the same time delivering a colorful appearance, that it is sort of eye catching. If I were to vote for a new logo for Coin Magi, that would be the blue one. I kinda of miss the II symbol which appeared on the original logo, which helped reflect Coin Magi's unique PoS II, but even still, it looks nice. Nevertheless, I'm looking forward for the new release of the Magi wallet, as well as more exciting stuff like the logo, to help increase Coin Magi's popularity and value. Thanks for the feedback; I'll see how it looks like by squeezing in a II.
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 03, 2017, 04:38:38 AM |
|
U guys have slack.
I've searched and found the following link setup by lionheart78 https://coinmagi.slack.com/Not sure how to join - is it invite only? Yes, this is the slack for magi. I'll get it into the OP. 111magic, I guess you're the manager, would we need invitation to join? Any guide will be great.
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 03, 2017, 04:41:01 AM |
|
Who can make a good roadmap? Joe?
I can help here if needed - but will need to know the main points - is there anything like a slack group for Magi, so these topics can be discussed in real-time? I can help set one up if you guys agree we need one. Bear with me..
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
February 03, 2017, 06:48:49 AM |
|
U guys have slack.
I've searched and found the following link setup by lionheart78 https://coinmagi.slack.com/Not sure how to join - is it invite only? Yes, this is the slack for magi. I'll get it into the OP. 111magic, I guess you're the manager, would we need invitation to join? Any guide will be great. I will look into that and post the info here.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
eule
|
|
February 03, 2017, 01:50:23 PM |
|
ok, i ran that code trying it for the Pine64. I still got the -msse2 error, so i commented that line out. the project built (it did take a while, it was running before i posted the last comment).
My problem is that nothing happens when i try to run the magid executable. no error, the program does seem to open, its not listed in task manager, etc. oh well. i may have to wait for the "official" pine64/arm build
You need to tell it to start... IIRC it should be
|
|
|
|
jediwashuu
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 03, 2017, 10:54:47 PM |
|
slowly i think i get closer... linux is not my area running the start command as listed gives me an error to set the rpcpassword in the magi.conf file. that file did not exist where it said, so i created it and set that field. now i get "couldn't connect to server". i did some digging, and turned up a magi.conf file with additional settings rpcport=8232 server=1 listen=1 rpcuser=rpcuser rpcpassword=rpcpass rpcallowip=127.0.0.1 addnode=104.128.225.215 addnode=104.131.42.100 but that did not fix my couldnt connect error. again, slowly but surely... ok, i ran that code trying it for the Pine64. I still got the -msse2 error, so i commented that line out. the project built (it did take a while, it was running before i posted the last comment).
My problem is that nothing happens when i try to run the magid executable. no error, the program does seem to open, its not listed in task manager, etc. oh well. i may have to wait for the "official" pine64/arm build
You need to tell it to start... IIRC it should be
|
|
|
|
starmman
Legendary
Offline
Activity: 1484
Merit: 1029
|
|
February 03, 2017, 10:59:41 PM |
|
The logo looks simple, yet gives a cleaner image of Coin Magi itself. I like it due to the simplicity of the same, while at the same time delivering a colorful appearance, that it is sort of eye catching. If I were to vote for a new logo for Coin Magi, that would be the blue one. I kinda of miss the II symbol which appeared on the original logo, which helped reflect Coin Magi's unique PoS II, but even still, it looks nice. Nevertheless, I'm looking forward for the new release of the Magi wallet, as well as more exciting stuff like the logo, to help increase Coin Magi's popularity and value. Thanks for the feedback; I'll see how it looks like by squeezing in a II. It'll be good to see a II in there (but also fine without one) =) Thanks for all your hard work Joe =)
|
|
|
|
eule
|
|
February 03, 2017, 11:51:27 PM |
|
slowly i think i get closer... linux is not my area running the start command as listed gives me an error to set the rpcpassword in the magi.conf file. that file did not exist where it said, so i created it and set that field. now i get "couldn't connect to server". i did some digging, and turned up a magi.conf file with additional settings rpcport=8232 server=1 listen=1 rpcuser=rpcuser rpcpassword=rpcpass rpcallowip=127.0.0.1 addnode=104.128.225.215 addnode=104.131.42.100 but that did not fix my couldnt connect error. again, slowly but surely... What exact error? Let it run for a while, it should find some nodes after a minute or two. You can also add some nodes from here: https://chainz.cryptoid.info/xmg/#!network
|
|
|
|
|