starmman
Legendary
Offline
Activity: 1484
Merit: 1029
|
|
September 07, 2017, 02:21:05 PM |
|
why bittrex cannot deposit magi
Hi Poer, (simple version of explanation) There were problems with the chain constantly becoming forked due to some miners having too much hashing power. The current live version of the chain is not a permanent solution, so hasn't been loaded onto the exchanges - the permanent solution is currently under a test network and will be rolled out if successful. Joe will likely post when this is ready then the exchanges will be notified and deposits/withdrawals back online again.
|
|
|
|
poer
|
|
September 07, 2017, 02:38:54 PM |
|
why bittrex cannot deposit magi
Hi Poer, (simple version of explanation) There were problems with the chain constantly becoming forked due to some miners having too much hashing power. The current live version of the chain is not a permanent solution, so hasn't been loaded onto the exchanges - the permanent solution is currently under a test network and will be rolled out if successful. Joe will likely post when this is ready then the exchanges will be notified and deposits/withdrawals back online again. ok thanks for information ....happy universary 3 years for magicoin
|
..Stake.com.. ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ ..PLAY NOW..
|
|
|
edward0181
|
|
September 07, 2017, 02:41:59 PM |
|
My Wallet is stuck on 1454101 in test wallet / net.
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
September 07, 2017, 02:43:46 PM |
|
My Wallet is stuck on 1454101 in test wallet / net.
Thanks Edward0181. Good thing you added TEST wallet in your post. 😉
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
edward0181
|
|
September 07, 2017, 02:48:04 PM |
|
All other wallets / nodes are on correct version ;-)
Just want to help and test, but I see other peers on much higher startheight, and my wallet just doesn't go higher.
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
September 07, 2017, 02:54:04 PM |
|
All other wallets / nodes are on correct version ;-)
Just want to help and test, but I see other peers on much higher startheight, and my wallet just doesn't go higher.
Great to see people helping out Joe with testing. Good work Edward0181
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
edward0181
|
|
September 07, 2017, 03:11:03 PM |
|
I'm lost getinfo: /m-wallet-1.4.3.1-test-linux/bin/64# ./magid getinfo { "version" : "v1.4.3.1", "protocolversion" : 71061, "walletversion" : 60000, "balance" : 256.73307218, "newmint" : 41.17470470, "stake" : 0.00000000, "blocks" : 1454101, "timeoffset" : 0, "moneysupply" : 7276388.55658416, "connections" : 5, "proxy" : "", "ip" : "85.214.23.202", "ipv4" : "85.214.23.202", "ipv6" : "0.0.0.0", "difficulty" : { "proof-of-work" : 0.89867533, "proof-of-stake" : 0.00267158 }, "testnet" : false, "keypoololdest" : 1503507967, "keypoolsize" : 102, "mininput" : 0.00000000, "paytxfee" : 0.00010000, "errors" : "This build is for test only; do NOT use for minging and any other transactions; report bugs to the Magi team."
getpeerinfo: ./magid getpeerinfo [ { "addr" : "115.79.39.188:57363", "services" : "00000001", "lastsend" : 1504796813, "lastrecv" : 1504796802, "conntime" : 1504796801, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : true, "releasetime" : 0, "startingheight" : 1453011, "banscore" : 0 }, { "addr" : "185.7.87.86:51555", "services" : "00000001", "lastsend" : 1504796813, "lastrecv" : 1504796813, "conntime" : 1504796812, "version" : 71061, "subver" : "/m-core:1.4.3.1/", "inbound" : true, "releasetime" : 0, "startingheight" : 1451302, "banscore" : 0 }, { "addr" : "180.173.16.119:8885", "services" : "00000001", "lastsend" : 1504797019, "lastrecv" : 1504797018, "conntime" : 1504796825, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : true, "releasetime" : 0, "startingheight" : 1469576, "banscore" : 0 }, { "addr" : "87.245.7.194:10069", "services" : "00000001", "lastsend" : 1504797019, "lastrecv" : 1504797019, "conntime" : 1504796879, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : true, "releasetime" : 0, "startingheight" : 1469579, "banscore" : 0 }, { "addr" : "104.128.225.240:8233", "services" : "00000001", "lastsend" : 1504797018, "lastrecv" : 1504797018, "conntime" : 1504796891, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : false, "releasetime" : 0, "startingheight" : 1469579, "banscore" : 0 }, { "addr" : "190.207.135.160:61710", "services" : "00000001", "lastsend" : 1504797020, "lastrecv" : 1504797021, "conntime" : 1504796974, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : true, "releasetime" : 0, "startingheight" : 1469579, "banscore" : 0 }, { "addr" : "46.36.36.96:8233", "services" : "00000001", "lastsend" : 1504797024, "lastrecv" : 1504797025, "conntime" : 1504796997, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : false, "releasetime" : 0, "startingheight" : 1469579, "banscore" : 0 }, { "addr" : "93.182.160.133:8233", "services" : "00000001", "lastsend" : 1504797020, "lastrecv" : 1504797021, "conntime" : 1504796998, "version" : 71061, "subver" : "/m-core:1.4.3/", "inbound" : false, "releasetime" : 0, "startingheight" : 1469579, "banscore" : 0 } ]
|
|
|
|
malafaya
|
|
September 07, 2017, 03:17:15 PM |
|
I think you're connecting also to peers on the main chain (main wallet v1.4.3). Test wallet is v1.4.3.1, right? Test chain is probably around block 1451000 whereas main chain is around 1469000. You should probably use connect= to connect to test peers only.
|
|
|
|
edward0181
|
|
September 07, 2017, 03:22:17 PM |
|
I'll remove blocks / database and use connect= instead of addnode... lets see
|
|
|
|
edward0181
|
|
September 07, 2017, 03:27:50 PM |
|
Better now :-D ./magid getinfo { "version" : "v1.4.3.1", "protocolversion" : 71061, "walletversion" : 60000, "balance" : 256.31924000, "newmint" : 0.00000000, "stake" : 0.00000000, "blocks" : 1451302, "timeoffset" : 0, "moneysupply" : 7269146.69022204, "connections" : 3, "proxy" : "", "ip" : "85.214.23.202", "ipv4" : "85.214.23.202", "ipv6" : "0.0.0.0", "difficulty" : { "proof-of-work" : 0.35032528, "proof-of-stake" : 0.00072166 }, "testnet" : false, "keypoololdest" : 1503507967, "keypoolsize" : 102, "mininput" : 0.00000000, "paytxfee" : 0.00010000, "errors" : "This build is for test only; do NOT use for minging and any other transactions; report bugs to the Magi team." }
./magid getpeerinfo [ { "addr" : "109.195.147.134:63553", "services" : "00000001", "lastsend" : 1504797968, "lastrecv" : 1504797954, "conntime" : 1504797954, "version" : 71051, "subver" : "/m-core:1.3.1/", "inbound" : true, "releasetime" : 0, "startingheight" : 1445929, "banscore" : 0 }, { "addr" : "185.7.87.86:52153", "services" : "00000001", "lastsend" : 1504797968, "lastrecv" : 1504797968, "conntime" : 1504797967, "version" : 71061, "subver" : "/m-core:1.4.3.1/", "inbound" : true, "releasetime" : 0, "startingheight" : 1451302, "banscore" : 0 }, { "addr" : "87.171.74.199:62620", "services" : "00000001", "lastsend" : 1504798012, "lastrecv" : 1504798011, "conntime" : 1504798011, "version" : 71061, "subver" : "/m-core:1.4.3.1/", "inbound" : true, "releasetime" : 0, "startingheight" : 1451355, "banscore" : 0 } ]
|
|
|
|
malafaya
|
|
September 07, 2017, 03:30:55 PM |
|
Hmmm, who is this guy?
"addr" : "109.195.147.134:63553", "services" : "00000001", "lastsend" : 1504797968, "lastrecv" : 1504797954, "conntime" : 1504797954, "version" : 71051, "subver" : "/m-core:1.3.1/",
|
|
|
|
BassT
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 07, 2017, 03:47:35 PM |
|
Strange, all day it worked without any problem with addnode=, 15 minutes ago got same problems like edward0181. Peers from mainnet appeared.
Changed to connect=, now all fine
|
|
|
|
malafaya
|
|
September 07, 2017, 03:57:08 PM |
|
Strange, all day it worked without any problem with addnode=, 15 minutes ago got same problems like edward0181. Peers from mainnet appeared.
Changed to connect=, now all fine
Peers may be obtained from other peers. For example, you may have gotten them from edward0181's peer. Another way is from the peer IRC channel, unless you set irc=0 in the .conf file. All wallet versions share the same IRC channel AFAIK. Of course, a peer may always connect to yours on its own initiative, unless you block it (by using connect=, or by blocking incoming peers with listen=0).
|
|
|
|
jcreyesb
|
|
September 07, 2017, 03:57:42 PM |
|
we must upgrade to 1.4.3.1 ??
|
|
|
|
malafaya
|
|
September 07, 2017, 03:58:37 PM |
|
we must upgrade to 1.4.3.1 ??
NO! It's not an upgrade. It's a test version. All transactions there are not valid on the main chain.
|
|
|
|
Cyboria
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 07, 2017, 04:12:35 PM |
|
Hmmm, who is this guy?
"addr" : "109.195.147.134:63553", "services" : "00000001", "lastsend" : 1504797968, "lastrecv" : 1504797954, "conntime" : 1504797954, "version" : 71051, "subver" : "/m-core:1.3.1/",
All I can see is that the signal is coming from somewhere in Russia/Bashkortostan Why are you wondering?
|
|
|
|
malafaya
|
|
September 07, 2017, 04:20:07 PM |
|
Hmmm, who is this guy?
"addr" : "109.195.147.134:63553", "services" : "00000001", "lastsend" : 1504797968, "lastrecv" : 1504797954, "conntime" : 1504797954, "version" : 71051, "subver" : "/m-core:1.3.1/",
All I can see is that the signal is coming from somewhere in Russia/Bashkortostan Why are you wondering? Edward0181 above said he used connect=, but he got this old wallet connecting to him. Also I thought older protocol versions could not connect to newer ones.
|
|
|
|
jcreyesb
|
|
September 07, 2017, 04:25:14 PM |
|
we must upgrade to 1.4.3.1 ??
NO! It's not an upgrade. It's a test version. All transactions there are not valid on the main chain. thanks bro..
|
|
|
|
The Frisian
Legendary
Offline
Activity: 1019
Merit: 1003
Senior Developer and founder of ViMeAv ICT
|
|
September 07, 2017, 04:33:28 PM |
|
Testwallet is not staking, problem?
|
|
|
|
BassT
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 07, 2017, 04:42:04 PM |
|
Hmm, didn't know there's IRC connection at all...
Took a quick look at the src and a sneak peek to the IRC-Channel and voila, found our russian friend there. So I guess his wallet (and perhaps many others) got to the testnet by IRCSeeding.
listen=0 and connect= are disabling IRC:
if (mapArgs.count("-connect") && fNoListen)
So yes friends, use connect= for testnet, not addnode=
|
|
|
|
|