[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[starmman]

why bittrex cannot deposit magi

Hi Poer,

(simple version of explanation) There were problems with the chain constantly becoming forked due to some miners having too much hashing power. The current live version of the chain is not a permanent solution, so hasn't been loaded onto the exchanges - the permanent solution is currently under a test network and will be rolled out if successful. Joe will likely post when this is ready then the exchanges will be notified and deposits/withdrawals back online again.

[poer]

why bittrex cannot deposit magi

Hi Poer,

(simple version of explanation) There were problems with the chain constantly becoming forked due to some miners having too much hashing power. The current live version of the chain is not a permanent solution, so hasn't been loaded onto the exchanges - the permanent solution is currently under a test network and will be rolled out if successful. Joe will likely post when this is ready then the exchanges will be notified and deposits/withdrawals back online again.

ok thanks for information ....happy universary 3 years for magicoin

[edward0181]

My Wallet is stuck on 1454101 in test wallet / net.

[111magic]

My Wallet is stuck on 1454101 in test wallet / net.

Thanks Edward0181. Good thing you added TEST wallet in your post. 😉

[edward0181]

All other wallets / nodes are on correct version ;-)

Just want to help and test, but I see other peers on much higher startheight, and my wallet just doesn't go higher.

[111magic]

All other wallets / nodes are on correct version ;-)

Just want to help and test, but I see other peers on much higher startheight, and my wallet just doesn't go higher.

Great to see people helping out Joe with testing. Good work Edward0181

[edward0181]

I'm lost 
getinfo:

Code:

/m-wallet-1.4.3.1-test-linux/bin/64# ./magid getinfo
{
    "version" : "v1.4.3.1",
    "protocolversion" : 71061,
    "walletversion" : 60000,
    "balance" : 256.73307218,
    "newmint" : 41.17470470,
    "stake" : 0.00000000,
    "blocks" : 1454101,
    "timeoffset" : 0,
    "moneysupply" : 7276388.55658416,
    "connections" : 5,
    "proxy" : "",
    "ip" : "85.214.23.202",
    "ipv4" : "85.214.23.202",
    "ipv6" : "0.0.0.0",
    "difficulty" : {
        "proof-of-work" : 0.89867533,
        "proof-of-stake" : 0.00267158
    },
    "testnet" : false,
    "keypoololdest" : 1503507967,
    "keypoolsize" : 102,
    "mininput" : 0.00000000,
    "paytxfee" : 0.00010000,
    "errors" : "This build is for test only; do NOT use for minging and any other transactions; report bugs to the Magi team."

getpeerinfo:

Code:

 ./magid getpeerinfo
[
    {
        "addr" : "115.79.39.188:57363",
        "services" : "00000001",
        "lastsend" : 1504796813,
        "lastrecv" : 1504796802,
        "conntime" : 1504796801,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1453011,
        "banscore" : 0
    },
    {
        "addr" : "185.7.87.86:51555",
        "services" : "00000001",
        "lastsend" : 1504796813,
        "lastrecv" : 1504796813,
        "conntime" : 1504796812,
        "version" : 71061,
        "subver" : "/m-core:1.4.3.1/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1451302,
        "banscore" : 0
    },
    {
        "addr" : "180.173.16.119:8885",
        "services" : "00000001",
        "lastsend" : 1504797019,
        "lastrecv" : 1504797018,
        "conntime" : 1504796825,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1469576,
        "banscore" : 0
    },
    {
        "addr" : "87.245.7.194:10069",
        "services" : "00000001",
        "lastsend" : 1504797019,
        "lastrecv" : 1504797019,
        "conntime" : 1504796879,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1469579,
        "banscore" : 0
    },
    {
        "addr" : "104.128.225.240:8233",
        "services" : "00000001",
        "lastsend" : 1504797018,
        "lastrecv" : 1504797018,
        "conntime" : 1504796891,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : false,
        "releasetime" : 0,
        "startingheight" : 1469579,
        "banscore" : 0
    },
    {
        "addr" : "190.207.135.160:61710",
        "services" : "00000001",
        "lastsend" : 1504797020,
        "lastrecv" : 1504797021,
        "conntime" : 1504796974,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1469579,
        "banscore" : 0
    },
    {
        "addr" : "46.36.36.96:8233",
        "services" : "00000001",
        "lastsend" : 1504797024,
        "lastrecv" : 1504797025,
        "conntime" : 1504796997,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : false,
        "releasetime" : 0,
        "startingheight" : 1469579,
        "banscore" : 0
    },
    {
        "addr" : "93.182.160.133:8233",
        "services" : "00000001",
        "lastsend" : 1504797020,
        "lastrecv" : 1504797021,
        "conntime" : 1504796998,
        "version" : 71061,
        "subver" : "/m-core:1.4.3/",
        "inbound" : false,
        "releasetime" : 0,
        "startingheight" : 1469579,
        "banscore" : 0
    }
]

[malafaya]

I think you're connecting also to peers on the main chain (main wallet v1.4.3). Test wallet is v1.4.3.1, right? Test chain is probably around block 1451000 whereas main chain is around 1469000.
You should probably use connect= to connect to test peers only.

[edward0181]

I'll remove blocks / database and use connect= instead of addnode... lets see

[edward0181]

Better now :-D

Code:

./magid getinfo
{
    "version" : "v1.4.3.1",
    "protocolversion" : 71061,
    "walletversion" : 60000,
    "balance" : 256.31924000,
    "newmint" : 0.00000000,
    "stake" : 0.00000000,
    "blocks" : 1451302,
    "timeoffset" : 0,
    "moneysupply" : 7269146.69022204,
    "connections" : 3,
    "proxy" : "",
    "ip" : "85.214.23.202",
    "ipv4" : "85.214.23.202",
    "ipv6" : "0.0.0.0",
    "difficulty" : {
        "proof-of-work" : 0.35032528,
        "proof-of-stake" : 0.00072166
    },
    "testnet" : false,
    "keypoololdest" : 1503507967,
    "keypoolsize" : 102,
    "mininput" : 0.00000000,
    "paytxfee" : 0.00010000,
    "errors" : "This build is for test only; do NOT use for minging and any other transactions; report bugs to the Magi team."
}

Code:

./magid getpeerinfo
[
    {
        "addr" : "109.195.147.134:63553",
        "services" : "00000001",
        "lastsend" : 1504797968,
        "lastrecv" : 1504797954,
        "conntime" : 1504797954,
        "version" : 71051,
        "subver" : "/m-core:1.3.1/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1445929,
        "banscore" : 0
    },
    {
        "addr" : "185.7.87.86:52153",
        "services" : "00000001",
        "lastsend" : 1504797968,
        "lastrecv" : 1504797968,
        "conntime" : 1504797967,
        "version" : 71061,
        "subver" : "/m-core:1.4.3.1/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1451302,
        "banscore" : 0
    },
    {
        "addr" : "87.171.74.199:62620",
        "services" : "00000001",
        "lastsend" : 1504798012,
        "lastrecv" : 1504798011,
        "conntime" : 1504798011,
        "version" : 71061,
        "subver" : "/m-core:1.4.3.1/",
        "inbound" : true,
        "releasetime" : 0,
        "startingheight" : 1451355,
        "banscore" : 0
    }
]

[malafaya]

Hmmm, who is this guy?

"addr" : "109.195.147.134:63553",
"services" : "00000001",
"lastsend" : 1504797968,
"lastrecv" : 1504797954,
"conntime" : 1504797954,
"version" : 71051,
"subver" : "/m-core:1.3.1/",

[BassT]

Strange, all day it worked without any problem with addnode=, 15 minutes ago got same problems like edward0181. Peers from mainnet appeared.

Changed to connect=, now all fine

[malafaya]

Strange, all day it worked without any problem with addnode=, 15 minutes ago got same problems like edward0181. Peers from mainnet appeared.

Changed to connect=, now all fine

Peers may be obtained from other peers. For example, you may have gotten them from edward0181's peer.
Another way is from the peer IRC channel, unless you set irc=0 in the .conf file. All wallet versions share the same IRC channel AFAIK.

Of course, a peer may always connect to yours on its own initiative, unless you block it (by using connect=, or by blocking incoming peers with listen=0).

[jcreyesb]

we must upgrade to 1.4.3.1 ??

[malafaya]

we must upgrade to 1.4.3.1 ??

NO! It's not an upgrade. It's a test version. All transactions there are not valid on the main chain.

[Cyboria]

Hmmm, who is this guy?

"addr" : "109.195.147.134:63553",
"services" : "00000001",
"lastsend" : 1504797968,
"lastrecv" : 1504797954,
"conntime" : 1504797954,
"version" : 71051,
"subver" : "/m-core:1.3.1/",

All I can see is that the signal is coming from somewhere in Russia/Bashkortostan
Why are you wondering?

[malafaya]

Hmmm, who is this guy?

"addr" : "109.195.147.134:63553",
"services" : "00000001",
"lastsend" : 1504797968,
"lastrecv" : 1504797954,
"conntime" : 1504797954,
"version" : 71051,
"subver" : "/m-core:1.3.1/",

All I can see is that the signal is coming from somewhere in Russia/Bashkortostan
Why are you wondering?

Edward0181 above said he used connect=, but he got this old wallet connecting to him.
Also I thought older protocol versions could not connect to newer ones.

[jcreyesb]

we must upgrade to 1.4.3.1 ??

NO! It's not an upgrade. It's a test version. All transactions there are not valid on the main chain.

thanks bro..

[The Frisian]

Testwallet is not staking, problem?

[BassT]

Hmm, didn't know there's IRC connection at all...

Took a quick look at the src and a sneak peek to the IRC-Channel and voila, found our russian friend there. So I guess his wallet (and perhaps many others) got to the testnet by IRCSeeding.

listen=0 and connect= are disabling IRC:

if (mapArgs.count("-connect") && fNoListen)

So yes friends, use connect= for testnet, not addnode=