[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[starmman]

Testwallet is not staking, problem?

Could be block age - Maybe you need to wait for 8 hours, or send the coins back to yourself (and wait 8 hours), the network weight is very low there

[edward0181]

Well. So far it runs ok. Few blocks mined but I have no weight to stake. But seeing older wallet versions raised the question, shouldn't the older wallet be prohibited to connect. As they haven't gotten the new coding? Will that fix some of the forking problems too?

[The Frisian]

Testwallet is not staking, problem?

Could be block age - Maybe you need to wait for 8 hours, or send the coins back to yourself (and wait 8 hours), the network weight is very low there

I tried with a wallet of today, also with a wallet of the 19th of August. Both no staking.

[starmman]

Testwallet is not staking, problem?

Could be block age - Maybe you need to wait for 8 hours, or send the coins back to yourself (and wait 8 hours), the network weight is very low there

I tried with a wallet of today, also with a wallet of the 19th of August. Both no staking.

And I notice that your block weight is much higher than the network weight - I wonder why that is

[My9bot]

***************Testwallet*****************

Testwallet is not staking, problem?

try importprivkey in a new wallet.dat

or reset an start again from https://bitcointalk.org/index.php?topic=735170.msg21581276#msg21581276

[The Frisian]

***************Testwallet*****************

Testwallet is not staking, problem?

try importprivkey in a new wallet.dat

or reset an start again from https://bitcointalk.org/index.php?topic=735170.msg21581276#msg21581276

Did a few times!

[malafaya]

now can someone please explain to me how do i send money from my paper wallet generated at https://walletgenerator.net/?currency=Magicoin
into my pc wallet?

thank you guys!

You can simply "connect" your wallet to the address in the paper wallet:
1. Access the "Console"
2. Type importprivkey <paper_wallet_private_key> , where <paper_wallet_private_key> is the private key printed in your paper wallet
3. After a while you should see the balance reflected in the wallet

Remember you will be making transactions also with the balance of your paper wallet from then on.

[zekk]

Is there any pool up and running?

[joelao95]

***************Testwallet*****************

Testwallet is not staking, problem?

try importprivkey in a new wallet.dat

or reset an start again from https://bitcointalk.org/index.php?topic=735170.msg21581276#msg21581276

Did a few times!

I'll check this out.

[joelao95]

I have put a test chain on node 45.35.251.73. This is only for test; mining won't be valid:

Download the wallet and blockchain from the following:

http://coinmagi.org/bin/test/
(I'm away from my compiling setup so only 64bit binaries are available at the moment)

source: https://github.com/magi-project/magi/tree/v1.4.3-test

* v1.4.3.1
* v1.4.3.2
Updated protocol version so that prior version will be disconnected

Code:

"version" : "v1.4.3.2"
"protocolversion" : 71070

Pls help the test (PoW & PoS mining). We'd see if this test comes out without forks.

The chain will proceed when PoS and PoW both are mined or in a pace of about 15minutes when block conditions aren't met. If you have coins in the official chain, you might be able to use that on the test chain for PoS minting (make sure backup wallet.dat).

Node:

Code:

addnode=45.35.251.73

Prior versions will be disconnected by using v1.4.3.2. If you can't sync with the new wallet, re-download blockchain. addnode=45.35.251.73 is recommended for the new version.

[eogr-s]

PoW mining in test wallet 1.4.3.2 (linux version) is not working
(mining via "setgenerate true")

Code:

MagiMiner:
new block found  
  hash: 00000f14abec41e0f39f8effb07420e98cd217e8f5745d21b2d8658e8540fc0e  
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=00000f14abec41e0f39f8effb07420e98cd217e8f5745d21b2d8658e8540fc0e, ver=5, hashPrevBlock=00000407185e0b72f5f672cd463726510ad387317a0dc4524c611381feb96b7b, hashMerkleRoot=3412f4a8ca2dff58511faf7e78e8eaec820ebcefe1cbc0270dcd532b10f935a1, nTime=1504853099, nBits=1e0fffff, nNonce=44657, vtx=1, vchBlockSig=3045022100bcf7c3704619a70ad35d90e107f81fb3432654cc2801e518e516650bb2ced573022029e124193c693aaddf013ad8535062acced18401d2f3bf816493c7524ad61d6c)
  Coinbase(hash=3412f4a8ca, nTime=1504853080, ver=1, vin.size=1, vout.size=1, nLockTime=0)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 039825160101062f503253482f)
    CTxOut(nValue=8.19326608, scriptPubKey=025bcf17216ee86f14906f9026ce8b9dd5627d98d4b5d7486c53321fe303368945 OP_CHECKSIG)
  vMerkleTree: 3412f4a8ca 
generated 8.19326608
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451416)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted

wallet 1.4.3.2 (linux version)

[111magic]

PoW mining is not working
(mining "via setgenerate true")

Code:

MagiMiner:
new block found  
  hash: 00000f14abec41e0f39f8effb07420e98cd217e8f5745d21b2d8658e8540fc0e  
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=00000f14abec41e0f39f8effb07420e98cd217e8f5745d21b2d8658e8540fc0e, ver=5, hashPrevBlock=00000407185e0b72f5f672cd463726510ad387317a0dc4524c611381feb96b7b, hashMerkleRoot=3412f4a8ca2dff58511faf7e78e8eaec820ebcefe1cbc0270dcd532b10f935a1, nTime=1504853099, nBits=1e0fffff, nNonce=44657, vtx=1, vchBlockSig=3045022100bcf7c3704619a70ad35d90e107f81fb3432654cc2801e518e516650bb2ced573022029e124193c693aaddf013ad8535062acced18401d2f3bf816493c7524ad61d6c)
  Coinbase(hash=3412f4a8ca, nTime=1504853080, ver=1, vin.size=1, vout.size=1, nLockTime=0)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 039825160101062f503253482f)
    CTxOut(nValue=8.19326608, scriptPubKey=025bcf17216ee86f14906f9026ce8b9dd5627d98d4b5d7486c53321fe303368945 OP_CHECKSIG)
  vMerkleTree: 3412f4a8ca 
generated 8.19326608
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451416)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted

Pls add the version you use in the post so we don't get confused.

[gunka]

Is this a critical error or not?

ERROR: mempool transaction missing input

Code:

Magi version v1.4.3.1 ()
Using OpenSSL version OpenSSL 1.0.2j  26 Sep 2016
Startup time: 09/08/17 06:41:15
Default data directory C:\Users\gun\AppData\Roaming\Magi
Used data directory C:\Wallets\MagiDB-test
dbenv.open LogDir=C:\Wallets\MagiDB-test\database ErrorFile=C:\Wallets\MagiDB-test\db.log
Loading block index...
Opening LevelDB in C:\Wallets\MagiDB-test\blocks\index
Transaction index version is 72001
Opened LevelDB successfully
LoadBlockIndex(): hashBestChain=000001acc5b89f998ee7  height=1451414  trust=66007836749248  date=09/08/17 06:32:52
LoadBlockIndex(): synchronized checkpoint 000004c91ca895a8c63176b1671eff34291ad671e59ae46630ffd8f985dd56cc
Verifying last 500 blocks at level 1
 block index           13189ms
Loading wallet...
nFileVersion = 1040300
 wallet                  234ms
Rescanning last 14152 blocks (from block 1437262)...
AddToWallet de2d1b5c25  
 rescan                 4063ms
Loading addresses...
ERROR: CAddrman::Read() : open failed
Invalid or missing peers.dat; recreating
Loaded 0 addresses from peers.dat  0ms
mapBlockIndex.size() = 1451918
nBestHeight = 1451414
setKeyPool.size() = 101
mapWallet.size() = 16
mapAddressBook.size() = 2
ThreadRPCServer started
send version message: version 71061, blocks=1451414, us=0.0.0.0:0, them=0.0.0.0:0, peer=127.0.0.1:0
DNS seeding disabled
ThreadIRCSeed started
Done loading
Stake minting enabled at startup.
ThreadOpenConnections started
ThreadSocketHandler started
ThreadOpenAddedConnections started
ThreadMessageHandler started
ThreadStakeMiner started
CTxMemPool::accept() : accepted 71f238f35b (poolsz 1)
trying connection 45.35.251.73:8233 lastseen=390236.9hrs
MagiMiner started for proof-of-stake
CTxMemPool::accept() : accepted 35d38570c0 (poolsz 2)
CTxMemPool::accept() : accepted 0331ff5fd0 (poolsz 3)
CTxMemPool::accept() : accepted df64a008f3 (poolsz 4)
CTxMemPool::accept() : accepted 262827191a (poolsz 5)
CTxMemPool::accept() : accepted 3a8bc52123 (poolsz 6)
CTxMemPool::accept() : accepted 7f2f232d45 (poolsz 7)
CTxMemPool::accept() : accepted 35fefdc410 (poolsz 8)
CTxMemPool::accept() : accepted a348c10a94 (poolsz 9)
CTxMemPool::accept() : accepted 4b32a0712b (poolsz 10)
CTxMemPool::accept() : accepted 7c39e79d0c (poolsz 11)
CTxMemPool::accept() : accepted 4b7f0c9bcd (poolsz 12)
CTxMemPool::accept() : accepted bd16d6359b (poolsz 13)
CTxMemPool::accept() : accepted 8b7e28ff3f (poolsz 14)
CTxMemPool::accept() : accepted 8aad8cdaf8 (poolsz 15)
Flushed 0 addresses to peers.dat  0ms
refreshWallet
ipcThread started
IRC :irc.smutfairy.com NOTICE * :*** Looking up your hostname
IRC :irc.smutfairy.com NOTICE * :*** Couldn't look up your hostname
IRC SENDING: NICK x507541537

IRC SENDING: USER x507541537 8 * : x507541537

connected 45.35.251.73:8233
send version message: version 71061, blocks=1451414, us=0.0.0.0:0, them=45.35.251.73:8233, peer=45.35.251.73:8233
IRC :irc.smutfairy.com 001 x507541537 :Welcome to the LFNet Internet Relay Chat Network x507541537
IRC :irc.smutfairy.com 002 x507541537 :Your host is irc.smutfairy.com[::/6667], running version hybrid-8.2.8
IRC :irc.smutfairy.com 003 x507541537 :This server was created Sep 11 2015 at 16:23:32
IRC :irc.smutfairy.com 004 x507541537 irc.smutfairy.com hybrid-8.2.8 DFGHRSWabcdefgijklnopqrsuwxy bchiklmnoprstveCIMORS bkloveIh
socket closed
disconnecting node 45.35.251.73:8233
IRC SENDING: USERHOST x507541537

IRC :irc.smutfairy.com 302 x507541537 :x507541537=+x507541537@91.210.44.134 
GetIPFromIRC() got userhost 91.210.44.134
GetIPFromIRC() returned 91.210.44.134
IRC SENDING: JOIN #magi00

IRC SENDING: WHO #magi00


Added 104.237.4.26:7648 from 62.210.131.147: 0 tried, 93 new
IRC got new address: 104.237.4.26:7648
IRC got who
IRC got who
trying connection 79.111.15.151:8233 lastseen=0.9hrs
connection timeout
trying connection 77.249.103.232:8233 lastseen=0.9hrs
connection timeout
trying connection 51.255.166.128:8233 lastseen=0.9hrs
connected 51.255.166.128:8233
send version message: version 71061, blocks=1451414, us=0.0.0.0:0, them=51.255.166.128:8233, peer=51.255.166.128:8233
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
trying connection 83.139.146.116:8233 lastseen=0.9hrs
Added time data, samples 2, offset -16 (+0 minutes)
Moving 51.255.166.128:8233 to tried
receive version message: version 71061, blocks=1470461, us=91.210.44.134:61905, them=51.255.166.128:8233, peer=51.255.166.128:8233
accepted alert 1040, AppliesToMe()=0
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
received block 00000000d027b07255ac
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451303)
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: 51.255.166.128:8233 (0 -> 100) DISCONNECTING
disconnecting node 51.255.166.128:8233
connection timeout
trying connection 149.202.164.113:8233 lastseen=0.9hrs
connection timeout
trying connection 84.201.247.230:8233 lastseen=0.9hrs
connection timeout
trying connection 95.165.193.218:8233 lastseen=0.9hrs
connection timeout
trying connection 113.53.1.182:8233 lastseen=0.9hrs
connection timeout
trying connection 146.185.175.118:8233 lastseen=0.9hrs
connected 146.185.175.118:8233
send version message: version 71061, blocks=1451414, us=0.0.0.0:0, them=146.185.175.118:8233, peer=146.185.175.118:8233
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
trying connection 110.139.254.110:8233 lastseen=0.9hrs
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input

[111magic]

I have put a test chain on node 45.35.251.73. This is only for test; mining won't be valid:

Download the wallet and blockchain from the following:

http://coinmagi.org/bin/test/
(I'm away from my compiling setup so only 64bit binaries are available at the moment)

source: https://github.com/magi-project/magi/tree/v1.4.3-test

* v1.4.3.1
* v1.4.3.2
Updated protocol version so that prior version will be disconnected

Code:

"version" : "v1.4.3.2"
"protocolversion" : 71070

Pls help the test (PoW & PoS mining). We'd see if this test comes out without forks.

The chain will proceed when PoS and PoW both are mined or in a pace of about 15minutes when block conditions aren't met. If you have coins in the official chain, you might be able to use that on the test chain for PoS minting (make sure backup wallet.dat).

Node:

Code:

addnode=45.35.251.73

Prior versions will be disconnected by using v1.4.3.2. If you can't sync with the new wallet, re-download blockchain. addnode=45.35.251.73 is recommended for the new version.

Gunka check this post from dev Joe pls

[eogr-s]

PoW mining is not working
(mining "via setgenerate true")

Pls add the version you use in the post so we don't get confused.

wallet 1.4.3.2 (linux version)
I can provide the whole debug.log if nec

[111magic]

PoW mining is not working
(mining "via setgenerate true")

Pls add the version you use in the post so we don't get confused.

wallet 1.4.3.2 (linux version)
I can provide the whole debug.log if nec

Ok. Might be usefull for Joe. You can send it to him pm or post it here. Looks like Magi is in last testphase😃

[gunka]

Gunka check this post from dev Joe pls

Downloaded a new wallet http://coinmagi.org/bin/test/m-wallet-1.4.3.2-test-win.zip.
Downloaded again http://coinmagi.org/bin/test/m-block-chain-1451227.zip.
Started, a new purse address was created.
Everything is fine no problems.

Closed the program.
Copied the old file wallet.dat with the coins.
Started. Error again:

Maybe the problem is this?

Code:

Magi version v1.4.3.2 ()
Using OpenSSL version OpenSSL 1.0.2j  26 Sep 2016
Startup time: 09/08/17 07:14:46
Default data directory C:\Users\gun\AppData\Roaming\Magi
Used data directory C:\Wallets\MagiDB-test
dbenv.open LogDir=C:\Wallets\MagiDB-test\database ErrorFile=C:\Wallets\MagiDB-test\db.log
Loading block index...
Opening LevelDB in C:\Wallets\MagiDB-test\blocks\index
Transaction index version is 72001
Opened LevelDB successfully
LoadBlockIndex(): hashBestChain=000000e1c697e03a53b2  height=1451416  trust=66007836749250  date=09/08/17 07:06:48
LoadBlockIndex(): synchronized checkpoint 000004c91ca895a8c63176b1671eff34291ad671e59ae46630ffd8f985dd56cc
Verifying last 500 blocks at level 1
 block index           13127ms
Loading wallet...
nFileVersion = 1040300
 wallet                  234ms
Rescanning last 13706 blocks (from block 1437710)...
AddToWallet de2d1b5c25  
 rescan                 3797ms
Loading addresses...
ERROR: CAddrman::Read() : open failed
Invalid or missing peers.dat; recreating
Loaded 0 addresses from peers.dat  0ms
mapBlockIndex.size() = 1451928
nBestHeight = 1451416
setKeyPool.size() = 101
mapWallet.size() = 16
mapAddressBook.size() = 2
ThreadRPCServer started
send version message: version 71070, blocks=1451416, us=0.0.0.0:0, them=0.0.0.0:0, peer=127.0.0.1:0
DNS seeding disabled
ThreadIRCSeed started
Done loading
ThreadOpenAddedConnections started
Stake minting enabled at startup.
ThreadSocketHandler started
ThreadOpenConnections started
ThreadMessageHandler started
trying connection 45.35.251.73:8233 lastseen=390237.5hrs
CTxMemPool::accept() : accepted 71f238f35b (poolsz 1)
ThreadStakeMiner started
MagiMiner started for proof-of-stake
CTxMemPool::accept() : accepted 35d38570c0 (poolsz 2)
CTxMemPool::accept() : accepted 0331ff5fd0 (poolsz 3)
CTxMemPool::accept() : accepted df64a008f3 (poolsz 4)
CTxMemPool::accept() : accepted 262827191a (poolsz 5)
CTxMemPool::accept() : accepted 3a8bc52123 (poolsz 6)
CTxMemPool::accept() : accepted 7f2f232d45 (poolsz 7)
CTxMemPool::accept() : accepted 35fefdc410 (poolsz 8)
CTxMemPool::accept() : accepted a348c10a94 (poolsz 9)
CTxMemPool::accept() : accepted 4b32a0712b (poolsz 10)
CTxMemPool::accept() : accepted 7c39e79d0c (poolsz 11)
CTxMemPool::accept() : accepted 4b7f0c9bcd (poolsz 12)
CTxMemPool::accept() : accepted bd16d6359b (poolsz 13)
CTxMemPool::accept() : accepted 8b7e28ff3f (poolsz 14)
CTxMemPool::accept() : accepted 8aad8cdaf8 (poolsz 15)
Flushed 0 addresses to peers.dat  0ms
refreshWallet
ipcThread started
IRC :irc.smutfairy.com NOTICE * :*** Looking up your hostname
IRC :irc.smutfairy.com NOTICE * :*** Couldn't look up your hostname
IRC SENDING: NICK x423692007

IRC SENDING: USER x423692007 8 * : x423692007

connected 45.35.251.73:8233
send version message: version 71070, blocks=1451416, us=0.0.0.0:0, them=45.35.251.73:8233, peer=45.35.251.73:8233
IRC :irc.smutfairy.com 001 x423692007 :Welcome to the LFNet Internet Relay Chat Network x423692007
IRC :irc.smutfairy.com 002 x423692007 :Your host is irc.smutfairy.com[::/6667], running version hybrid-8.2.8
IRC :irc.smutfairy.com 003 x423692007 :This server was created Sep 11 2015 at 16:23:32
IRC :irc.smutfairy.com 004 x423692007 irc.smutfairy.com hybrid-8.2.8 DFGHRSWabcdefgijklnopqrsuwxy bchiklmnoprstveCIMORS bkloveIh
Added time data, samples 2, offset -15 (+0 minutes)
receive version message: version 71070, blocks=1451416, us=91.210.44.134:63406, them=45.35.251.73:8233, peer=45.35.251.73:8233
accepted alert 1040, AppliesToMe()=0
IRC SENDING: USERHOST x423692007

IRC :irc.smutfairy.com 302 x423692007 :x423692007=+x423692007@91.210.44.134 
GetIPFromIRC() got userhost 91.210.44.134
GetIPFromIRC() returned 91.210.44.134
IRC SENDING: JOIN #magi00

IRC SENDING: WHO #magi00

IRC got join
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input

[edward0181]

On test:
Created blocks on wallet 1.4.3.2 are not being accepted.

Code:

MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted
MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted
MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted

[My9bot]

***************Testwallet*****************

On test:
Created blocks on wallet 1.4.3.2 are not being accepted.

Code:

MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted
MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted
MagiMiner:
new block found
  hash: 0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc1431
target: 00000fffff000000000000000000000000000000000000000000000000000000
CBlock(hash=0000079b92d2f5e441910279ba641f1bfa4b0c47b3235011f4e066a603cc14$
  Coinbase(hash=2e6801019e, nTime=1504862414, ver=1, vin.size=1, vout.size$
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 03a225160102062f5032$
    CTxOut(nValue=10.4742666, scriptPubKey=030d40a0328d86d36d932422278a82e$
  vMerkleTree: 2e6801019e
generated 10.4742666
ERROR: AcceptBlock() : proof-of-work block violation (height = 1451426)
ERROR: ProcessBlock() : AcceptBlock FAILED
ERROR: MagiMiner : ProcessBlock, block not accepted

wait 15 mins


height   size   mint   time   extractBy   coinBaseString   BlockType
1451425   267   10.48471149   10 minutes, 58 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW2
1451424   267   10.51056684   25 minutes, 59 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1
1451423   264   10.55362615   41 minutes, 34 seconds   98vWyuYfmuLa1Ja7A7Fyxhwo4RtEKZbrwh   �%
/P2SH/   PoW2
1451422   267   10.58945817   57 minutes, 35 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1
1451421   266   10.6076032   1 hour, 12 minutes, 58 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW2
1451420   265   9.95036278   1 hour, 28 minutes, 31 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1
1451419   267   8.18353987   1 hour, 44 minutes, 8 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW2
1451418   266   8.19635471   1 hour, 59 minutes, 51 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1
1451417   267   8.19025575   2 hours, 15 minutes, 3 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW2
1451416   266   8.19326608   2 hours, 31 minutes, 13 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1
1451415   267   8.14948904   2 hours, 46 minutes, 31 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW2
1451414   267   8.13970867   3 hours, 2 minutes, 7 seconds   99Fb8i36VSP3uysY1KC97VkZnvCSArH6AE   �%�/P2SH/   PoW1




you see 15 min block time

[selectnumber123]

I had this item in hand for a long time, but it was held high, waiting for rescue at the top of the mountain