|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 05, 2012, 05:45:51 PM |
|
juhuuuu, es geeeeht!!!!!! Ich habe ein anderes Netzteil verwendet und nun geht es! lt. Typenschild hätte das ursprüngliche Netzteil: OUTPUT 12V 2A das neue hat nun OUTPUT 12V 3A und es geeeeht!!!! An der stelle noch vielen dank an Chefnet. Er hat mich nicht hängen lassen und sich sogar per TeamViewer auf meinen Rechner verbunden. Wir konnten zwar dann nichts feststellen, aber alleine die Absicht ist ihm sehr hoch anzurechnen! Vielen dank Chefnet!
|
|
|
|
streetuff
|
|
July 05, 2012, 05:49:57 PM |
|
lt. ZTEX sollte das netzteil "mindestens" 12V 4A haben... hoffe dir fliegt das nicht um die ohren oder brennt ab
|
|
|
|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 05, 2012, 06:56:18 PM |
|
Auf die Gefahr hin, dass ich langsam in diesem Thread zum Spammer werde, möchte ich dennoch ein paar Bilder posten. Und ein paar Links, wie ich nun was gemacht habe. Vielleicht hilft es ja irgendwann jemanden. FPGA-Board: http://www.ztex.de/usb-fpga-1/usb-fpga-1.15y.e.htmlBestellt bei: ChefnetTreiber für Windows: libusb-win32 aus http://www.ztex.de/downloads/ztex-120412.zipBitcoin Software: http://www.ztex.de/btcminer/ZtexBTCMiner-120417.jarAufruf: java -cp ZtexBTCMiner-120417.jar BTCMiner -m c -host http://pool:8332 -u worker -p pass -l log.txt -bl blocks.txthttp://i45.tinypic.com/2ajx1rl.jpg2012-07-05T20:15:19: -------- 2012-07-05T20:19:46: New block detected by long polling 2012-07-05T20:20:19: bus-0-0: ztex_ufm1_15y1-04A36E2D07-1: f=212,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=212,0MH/s, submitted 6 new nonces, luckFactor=0,92 2012-07-05T20:20:19: bus-0-0: ztex_ufm1_15y1-04A36E2D07-2: f=212,00MHz, errorRate=0,00%, maxErrorRate=0,50%, hashRate=212,0MH/s, submitted 9 new nonces, luckFactor=0,93 2012-07-05T20:20:19: bus-0-0: ztex_ufm1_15y1-04A36E2D07-3: f=220,00MHz, errorRate=0,01%, maxErrorRate=0,72%, hashRate=220,0MH/s, submitted 18 new nonces, luckFactor=1,08 2012-07-05T20:20:19: bus-0-0: ztex_ufm1_15y1-04A36E2D07-4: f=216,00MHz, errorRate=0,48%, maxErrorRate=0,88%, hashRate=215,0MH/s, submitted 8 new nonces, luckFactor=0,96 2012-07-05T20:20:19: bus-0-0: poll loop time: 19ms (USB: 12ms network: 8ms) getwork time: 57ms submit time: 49ms 2012-07-05T20:20:19: Total hash rate: 858,9 MH/s 2012-07-05T20:20:19: Total submitted hash rate: 832,4 MH/s 2012-07-05T20:20:19: -------- Ich hatte zuerst Probleme. Die Ursache war dann das Netzteil. Der Post von streetuff sagt da alles: lt. ZTEX sollte das netzteil "mindestens" 12V 4A haben...
|
|
|
|
BR0KK
|
|
July 05, 2012, 08:23:45 PM |
|
2A reichen auch
|
|
|
|
Chefnet (OP)
|
|
July 06, 2012, 10:09:41 AM |
|
naja 2A sind doch recht wenig, das sind dann 24 Watt, wobei eigenlich laut Ztexangabe jeweils 9W + Lüfter gezogen werden, also 4*9+x = ca. 40W, daher die 12V 4A Empfehlung.
Aber danke für dein Feedback.
|
|
|
|
Chefnet (OP)
|
|
July 06, 2012, 10:12:58 AM |
|
und wegen dem eigenen Board, das muss nochmal nachgearbeitet werden, da 3 Konnektoren vergessen worden ...
|
|
|
|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 10, 2012, 05:59:07 PM Last edit: July 10, 2012, 06:11:49 PM by hackwienix |
|
Abend Ich habe ein Problem mit meinem Quad. Diese Meldung hatte ich früher auch schon, aber mit einem einfachen Ein-/Ausstecken (oder auch 2mal) ging es dann. Nur jetzt bekomme ich das Board einfach nicht mehr zum Laufen. Weiß jemand was ich noch versuchen könnte? (Re)Scanning bus ... MAC address: 0004a36e2d07 ztex_ufm1_15y1-04A36E2D07: New device: bitfile=ztex_ufm1_15y1 f_default=200,00MHz f_max=240,00MHz HpC=1.0H Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 0: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 1: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 2: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
...und so weiter
|
|
|
|
randomguy7
|
|
July 10, 2012, 06:46:13 PM |
|
Abend Ich habe ein Problem mit meinem Quad. Diese Meldung hatte ich früher auch schon, aber mit einem einfachen Ein-/Ausstecken (oder auch 2mal) ging es dann. Nur jetzt bekomme ich das Board einfach nicht mehr zum Laufen. Weiß jemand was ich noch versuchen könnte? (Re)Scanning bus ... MAC address: 0004a36e2d07 ztex_ufm1_15y1-04A36E2D07: New device: bitfile=ztex_ufm1_15y1 f_default=200,00MHz f_max=240,00MHz HpC=1.0H Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 0: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 1: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 2: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122) Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ... Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ... Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
...und so weiter Ich hatte das Problem auch mit einem Board, dachte schon es wär kaputt. Bei einem letzten Versuch vor ich Chefnet schreiben wollte hab ich nochmal alle Lüfter neu drauf gemacht und die überflüssige Wärmeleitpaste weggemacht (hatte einiges rausgedrückt, hab aber die nichtleitende die dabei ist verwendet). Dann gings plötzlich. Das gleiche hatte ich aber schon ein paar mal gemacht und da hat es nichts geholfen, aber ein Versuch ist es wert. Was mir auch aufgefallen ist, ist dass ich den gleichen Fehler sehr häufig bekomme wenn ich das USB Kabel anschließe während das Board schon Strom hat. Seit ich die Kabel andersrum einsteck kommt der Fehler praktisch nicht mehr.
|
|
|
|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 10, 2012, 06:49:21 PM |
|
Ich hatte das Problem auch mit einem Board, dachte schon es wär kaputt. Bei einem letzten Versuch vor ich Chefnet schreiben wollte hab ich nochmal alle Lüfter neu drauf gemacht und die überflüssige Wärmeleitpaste weggemacht (hatte einiges rausgedrückt, hab aber die nichtleitende die dabei ist verwendet). Dann gings plötzlich. Das gleiche hatte ich aber schon ein paar mal gemacht und da hat es nichts geholfen, aber ein Versuch ist es wert.
Was mir auch aufgefallen ist, ist dass ich den gleichen Fehler sehr häufig bekomme wenn ich das USB Kabel anschließe während das Board schon Strom hat. Seit ich die Kabel andersrum einsteck kommt der Fehler praktisch nicht mehr.
Danke für den Hinweis! Wie bekomme ich die Lüfter am schonendsten ab?
|
|
|
|
randomguy7
|
|
July 10, 2012, 06:51:26 PM |
|
Ich hatte das Problem auch mit einem Board, dachte schon es wär kaputt. Bei einem letzten Versuch vor ich Chefnet schreiben wollte hab ich nochmal alle Lüfter neu drauf gemacht und die überflüssige Wärmeleitpaste weggemacht (hatte einiges rausgedrückt, hab aber die nichtleitende die dabei ist verwendet). Dann gings plötzlich. Das gleiche hatte ich aber schon ein paar mal gemacht und da hat es nichts geholfen, aber ein Versuch ist es wert.
Was mir auch aufgefallen ist, ist dass ich den gleichen Fehler sehr häufig bekomme wenn ich das USB Kabel anschließe während das Board schon Strom hat. Seit ich die Kabel andersrum einsteck kommt der Fehler praktisch nicht mehr.
Danke für den Hinweis! Wie bekomme ich die Lüfter am schonendsten ab? Den Lüfter gut festhalten, dass er wenn sich die Pins lösen, er net gleich wegspringt . Die Push-Pins gehen eigentlich relativ gut wieder raus wenn du sie mit den Fingernägeln zusammen drückst und dabei leicht hin und her drehst.
|
|
|
|
|
Chefnet (OP)
|
|
July 10, 2012, 07:21:10 PM |
|
hast du eine anderes netzteil probiert? oder ws für eins benutzt du gerade?
|
|
|
|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 10, 2012, 07:27:46 PM |
|
hast du eine anderes netzteil probiert? oder ws für eins benutzt du gerade?
Ich habe ein Netzteil von Ktec (12V, 3A) und eines von Voltcraft (15V, 6A) versucht.
|
|
|
|
Chefnet (OP)
|
|
July 10, 2012, 07:32:21 PM Last edit: July 12, 2012, 03:50:12 AM by Chefnet |
|
12V 3a ist etwas zuwenig, wenn das andere stabil ist sollte das gut gehen. Ansonsten am besten das Log direkt an ztex schicken und fragen
|
|
|
|
hackwienix
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 10, 2012, 07:47:27 PM Last edit: July 12, 2012, 04:56:50 AM by hackwienix |
|
12V 3a ist etwas zuwenig, wenn das andere stabil ist sollte das gut gehen. Ansonsten am besten das Log direkt an ztex schicken und fragen ztex.de
ich hab mal an ztex geschreiben mal schaun ob ich ne Antwort bekomme EDIT: Hab den Fehler vermutlich gefunden. Ein Widerstand und ein weiteres Bauteil sind offensichtlich abgebrochen! Ich hoffe, dass es keine weitere versteckten Schäden gibt. Das Board habe ich zur Reperatur eingeschickt.
|
|
|
|
BR0KK
|
|
July 11, 2012, 10:17:19 PM |
|
nim die mail raus das mag ztex nicht (niemand mag das denn das ist mit google findbar !)
|
|
|
|
BR0KK
|
|
July 15, 2012, 11:06:48 AM |
|
Wie sind denn imo diecwartezeitenvauf ein neues Quad? Oder will jemand eines los werden? Dann schreibt mir
|
|
|
|
Chefnet (OP)
|
|
July 16, 2012, 06:54:29 AM |
|
Ich werde diese Woche neue Rechnungen machen, da der letzte Schwung innerhalb von 2 Wochen kommen soll. Da sind auch noch einige Boards frei. Ich werde alle die interesse haben (auch bereits bekundet) natürlich anschreiben. Ansonsten gibt es auch gute Nachrichten an der Selbstherstellung :-) Bilder und Fakten später, aber es läuft seit Do. Nachmittag stabil durch.
|
|
|
|
pazor
Legendary
Offline
Activity: 966
Merit: 1000
|
|
July 16, 2012, 10:39:44 AM |
|
das klingt doch super @chefnet!
... und wenn jemand auf ein quad gehen will und sein single board abstossen möchte, ich SUCHE noch ein single board 1.15x von ztex
einfach PM an mich
|
treuhand-Dienst gewünscht? - frag per PM an BTC 174X17nR7vEQBQo4GXKRGMGaTmB49Gf1yT
|
|
|
|