KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2437 blocks

[swanny88]

...and...all the matured blocks have paid out...the last two have not matured yet.

The third on the list is the one I'm concerned about.  I haven't received anything on that one and it's been matured all day.  Concerns me cause I changed my payout wallet before we got that block.  I double checked the address.  It's a new bitcoin core address, just updated to 16.0.  Wondering if that's the problem

Block#523459

Just checked the blockchain info.  No one was paid for this block yet but I'm sure it's just the KDB went down or something and should be fixed within a day.

[maddadata]

...and...all the matured blocks have paid out...the last two have not matured yet.

The third on the list is the one I'm concerned about.  I haven't received anything on that one and it's been matured all day.  Concerns me cause I changed my payout wallet before we got that block.  I double checked the address.  It's a new bitcoin core address, just updated to 16.0.  Wondering if that's the problem

Block#523459

Just checked the blockchain info.  No one was paid for this block yet but I'm sure it's just the KDB went down or something and should be fixed within a day.

Thanx Swanny!  I was hoping that's the case.  Someday I'm gonna learn to read the blockchain better.  Always just looks like dyslexic monkeyscratch when I try  !

There she is...all good!

[BSGMiner]

...
* Has anyone ran into any issues with their dryer outlet not being surge protected? I'm currently dedicating a heavy duty surge protector to my mining rig
* Also, is it true that the PSU will run cooler--how to even tell, I don't know--on 220v vs. 110v?

...As far as 110 vs. 220, 220 allows you to pull lower amps, which in turn lowers the temp, in your power lines running TO your psu's. I've never worried too much about my psu temps, as they hardly ever get warm to the touch. This includes 2 apw3++, 2 sorcerer,  and 2 whatsminer m3 psu's. Even recently on 88°f days, they're pretty cool.

The problem here is low voltage, or sporadic voltage (weak grid on the island). I run 1800W line conditioners on each of my miners that supply the miner, controller, and network switch.

Thanks all. Good info.

[swanny88]

...and...all the matured blocks have paid out...the last two have not matured yet.

The third on the list is the one I'm concerned about.  I haven't received anything on that one and it's been matured all day.  Concerns me cause I changed my payout wallet before we got that block.  I double checked the address.  It's a new bitcoin core address, just updated to 16.0.  Wondering if that's the problem

Block#523459

Just checked the blockchain info.  No one was paid for this block yet but I'm sure it's just the KDB went down or something and should be fixed within a day.

Thanx Swanny!  I was hoping that's the case.  Someday I'm gonna learn to read the blockchain better.  Always just looks like dyslexic monkeyscratch when I try  !

There she is...all good!

Check now, It was just sent at 6:37 EST

[kano]

Thanx Schmokeandapancake!  Swishersweets and buttermilk 4 all!

Has payout been sent for block #523459?  I changed my payout address and I don't see it.  shows matured in the block list, and usually it goes out right away.  I'm just concerned that I screwed something up!

Yeah I sent it late (an hour ago) and it confirmed 40 minutes ago.

[MrRoach Sir]

Yah noob here, i'm mining to a wallet address and i'm on the results page. shows hash rate and some other stuff. is there anything there to give me an appx of what i'm earning? the "shares"? if so how do i compute it?

[clgrissom3]

Yah noob here, i'm mining to a wallet address and i'm on the results page. shows hash rate and some other stuff. is there anything there to give me an appx of what i'm earning? the "shares"? if so how do i compute it?

If you mine to your username with worker names you will get a much richer stats experience.

[kano]

Yah noob here, i'm mining to a wallet address and i'm on the results page. shows hash rate and some other stuff. is there anything there to give me an appx of what i'm earning? the "shares"? if so how do i compute it?

You need an account to see details other than your current miner stats.

The two stats available for address miners are there listed on the home page - the summary version http://www.kano.is/address.php?a=1NNN and the worker version http://www.kano.is/worker.php?a=1NNN

[maddadata]

Thanx Schmokeandapancake!  Swishersweets and buttermilk 4 all!

Has payout been sent for block #523459?  I changed my payout address and I don't see it.  shows matured in the block list, and usually it goes out right away.  I'm just concerned that I screwed something up!

Yeah I sent it late (an hour ago) and it confirmed 40 minutes ago.

All good now thanx Kano!  In the interem I learned how to read blocktrail better!

Mining on!

[LunEm]

Another S9 ordered, shipping this week. 14Th more for kano

[jhoren]

With two more miners being delivered tomorrow I thought I'd go ahead and make a box to help control both the heat and the sound.

I have a lid already made with hinges and a locking latch. Still yet to finish are the grates inside and holes to be drilled for power and network. I also will be putting together duct work to exhaust the heat outside. I have two inline duct fans being delivered tomorrow to push/pull air through the box.

https://i.imgur.com/9KIRec1.jpg

[ccgllc]

With two more miners being delivered tomorrow so I thought I'd go ahead and make a box to help control both the heat and the sound.

I have a lid already made with hinges and a locking latch. Still yet to finish are the grates inside and holes to be drilled for power and network. I also will be putting together duct work to exhaust the heat outside. I have two inline duct fans being delivered tomorrow to push/pull air through the box.

Hope those inline duct fans are rated around 300cfm...  it would be best to match them to the combined flow rate of the miner fans.

[jhoren]

With two more miners being delivered tomorrow so I thought I'd go ahead and make a box to help control both the heat and the sound.

I have a lid already made with hinges and a locking latch. Still yet to finish are the grates inside and holes to be drilled for power and network. I also will be putting together duct work to exhaust the heat outside. I have two inline duct fans being delivered tomorrow to push/pull air through the box.

Hope those inline duct fans are rated around 300cfm...  it would be best to match them to the combined flow rate of the miner fans.

Roger that. Local stores had max 80 cfm.

[kano]

Another S9 ordered, shipping this week. 14Th more for kano

The more the merrier

[BSGMiner]

With two more miners being delivered tomorrow so I thought I'd go ahead and make a box to help control both the heat and the sound.

I have a lid already made with hinges and a locking latch. Still yet to finish are the grates inside and holes to be drilled for power and network. I also will be putting together duct work to exhaust the heat outside. I have two inline duct fans being delivered tomorrow to push/pull air through the box.

Hope those inline duct fans are rated around 300cfm...  it would be best to match them to the combined flow rate of the miner fans.

Roger that. Local stores had max 80 cfm.

Trying to get a better understanding of your reasoning/method for calculating the needed airflow:

My Avalon6 fan runs at ~3500 RPM. How does this translate to CFM, and/or how can I calculate some of this stuff myself? Thanks.

[os2sam]

With two more miners being delivered tomorrow so I thought I'd go ahead and make a box to help control both the heat and the sound.

I have a lid already made with hinges and a locking latch. Still yet to finish are the grates inside and holes to be drilled for power and network. I also will be putting together duct work to exhaust the heat outside. I have two inline duct fans being delivered tomorrow to push/pull air through the box.

Hope those inline duct fans are rated around 300cfm...  it would be best to match them to the combined flow rate of the miner fans.

Roger that. Local stores had max 80 cfm.

Trying to get a better understanding of your reasoning/method for calculating the needed airflow:

My Avalon6 fan runs at ~3500 RPM. How does this translate to CFM, and/or how can I calculate some of this stuff myself? Thanks.

CFM is Cubic Feet per Minute.  RPM is just one of the variables.  The fan should have the CFM listed in the data sheet.  It's not something you generally calculate for yourself.

[MrRoach Sir]

I've tried to register a couple of different emails. everytime i try to login it says login failed the too many tries try later.

[kano]

I've tried to register a couple of different emails. everytime i try to login it says login failed the too many tries try later.

Registering more than once bans you.
You don't need more than one account.

You need to PM me your IP address since there may be a number of account names that it may have banned under.
Then I'll check ...

[kano]

Block! by 1Ab...

[faheshang]

Block! by 1Ab...

OMG another lucky block!