wiser
Legendary
Offline
Activity: 1806
Merit: 1029
|
|
October 11, 2014, 08:16:26 PM |
|
Since others are staking with version 5, then I'm unlocking. It seems the latest is that we all have to go along with v. 5 because that's what BitTrex is on.
Cryptzo, if staking with v. 5 is bad, though, please say so. It's hard to know what's best right now. I'm sure you're working on it.
|
|
|
|
coinking
Legendary
Offline
Activity: 927
Merit: 1000
|
|
October 11, 2014, 08:24:49 PM |
|
Since others are staking with version 5, then I'm unlocking. It seems the latest is that we all have to go along with v. 5 because that's what BitTrex is on.
Cryptzo, if staking with v. 5 is bad, though, please say so. It's hard to know what's best right now. I'm sure you're working on it.
Wiser, nice post count!
|
|
|
|
pkobse
|
|
October 11, 2014, 08:26:26 PM |
|
Oh man, just finished my downgrades to 1.0.4 So back to 1.0.5. Hope this is the final change, as bittrex doing 1.0.5 and I`m going to bed soon.
|
BTC 1C9FGy8kUTF1R21bhLyzXQHDjm87xoRenn, LTC LXZ7xhLYJU4K8zdtdYc89o81NgwXbSwEbC or DOGE DKJDnR8deKGRRbFWCnsSDz15ha5t43B75B. :-)
|
|
|
welchy8764
|
|
October 11, 2014, 08:28:06 PM |
|
Little confused dev's said go back to version 4 or lock version 5 wallet. Is that not correct?
|
|
|
|
pkobse
|
|
October 11, 2014, 08:31:41 PM Last edit: October 11, 2014, 08:46:30 PM by pkobse |
|
Alright. Here's the situation. People are staking into a new fork with the new wallets. The new wallets fork into this chain. I know it's a shitshow guys, but I think our only choice is to roll with it and get everyone updated to 1.0.5 asap. Once everyone's updated, then the 1.0.5's can stake.
I don't honestly know why 1.0.4's aren't accepting 1.0.5 blocks. But they're not. With 'trex updating to 1.0.5 now, there's just no choice. We have to go with it. I know I've been knee-jerking into trying to fix everything, but the fact is 1.0.5 has gone off on it's own fork, and we either all need to join up on it, or that's pretty much it.
Last update I`ve seen. [Edit] We will need some check information, if we are on correct chain, getblockhash 11329 gets me 3ccebfe90047e764fa80cb4ecf69bade3a68f3e19eb0f1f6285981ea340d0cc4
|
BTC 1C9FGy8kUTF1R21bhLyzXQHDjm87xoRenn, LTC LXZ7xhLYJU4K8zdtdYc89o81NgwXbSwEbC or DOGE DKJDnR8deKGRRbFWCnsSDz15ha5t43B75B. :-)
|
|
|
cryptzo (OP)
|
|
October 11, 2014, 08:43:10 PM |
|
I know it sucks and I know I said go to 1.0.4, but bittrex is going to 1.0.5 so everyone needs to go to 1.0.5 and resync immediately.
The block explorer is forked from 1.0.4 and is not on the right block. Nodes are resyncing. The proper hash for block 11321 is 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
Go to help > debug window and type getblock 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
If you get an error you need to get 1.0.5 and delete the stuff in %appdata%/seedcoin except for your wallet.dat file
This will not happen again. I'm not touching the staking algo again, or anything else that effects the network, and any core updates will be thoroughly tested over the course of several weeks before release, and there will be months of lead time to get the correct version.
|
|
|
|
wiser
Legendary
Offline
Activity: 1806
Merit: 1029
|
|
October 11, 2014, 08:46:48 PM |
|
I got this: { "hash" : "3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0", "confirmations" : 9, "size" : 444, "height" : 11321, "version" : 1, "merkleroot" : "1a20da2d0b4442d2ee718372d7c1bc68e0ea19c97cbb8de7f39fbc690ef68ab2", "mint" : 0.14349248, "time" : 1413059943, "nonce" : 0, "bits" : "1e69c5b7", "difficulty" : 0.00003693, "blocktrust" : "26b98", "chaintrust" : "28e49fc4df51da", "previousblockhash" : "62364289c04cd185ae529caf9139c2f9c3d367c428ab8d537bbc5ce4b864a7b8", "nextblockhash" : "24a4bbdacdfc518ca5396f601daa2a532c712f5bd6c5b16125388f0c937dd9d7", "flags" : "proof-of-stake", "proofhash" : "0003fa27fbe95d5fa800633cdb14f6b4a704f17c7d51836065b7ae565b5f5822", "entropybit" : 0, "modifier" : "406f00d126e815e9", "modifierchecksum" : "c85938aa", "tx" : [ "19b8ccba2ab3ac4a1a5dad61e4cb179c8d86b4dfbff00ac2e38c80bf6f41c62a", "88d91dfde6471fcd7a45a2aa52e933ac6a5b04acaa1057f4e3f57c0db40a70f1" ], "signature" : "3045022100af068f1171b3b85355d5cd2c967e156efc46d5fe68cecbf8ae284da82ee7ff8502202 c93db2224b563a7ce84a627d20b67bb9227b0cb1128bd0bf8fe562c4cebfd27" } Is that good? I know it sucks and I know I said go to 1.0.4, but bittrex is going to 1.0.5 so everyone needs to go to 1.0.5 and resync immediately.
The block explorer is forked from 1.0.4 and is not on the right block. Nodes are resyncing. The proper hash for block 11321 is 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
Go to help > debug window and type getblock 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
If you get an error you need to get 1.0.5 and delete the stuff in %appdata%/seedcoin except for your wallet.dat file
This will not happen again. I'm not touching the staking algo again, or anything else that effects the network, and any core updates will be thoroughly tested over the course of several weeks before release, and there will be months of lead time to get the correct version.
|
|
|
|
cryptzo (OP)
|
|
October 11, 2014, 08:50:01 PM |
|
I know it sucks and I know I said go to 1.0.4, but bittrex is going to 1.0.5 so everyone needs to go to 1.0.5 and resync immediately.
The block explorer is forked from 1.0.4 and is not on the right block. Nodes are resyncing. The proper hash for block 11321 is 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
Go to help > debug window and type getblock 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
If you get an error you need to get 1.0.5 and delete the stuff in %appdata%/seedcoin except for your wallet.dat file
This will not happen again. I'm not touching the staking algo again, or anything else that effects the network, and any core updates will be thoroughly tested over the course of several weeks before release, and there will be months of lead time to get the correct version.
1 exception. I'll be setting checkpoints after the growth period ends that will allow wallets to more easily navigate the mess of a blockchain we have right now. That will solve most of the syncing issues. But again, even that will be thoroughly tested and run for along period of time and I will be absolutely 100% sure that it is compatable with the current network. It will be an optional update. Period.
|
|
|
|
pkobse
|
|
October 11, 2014, 08:50:22 PM |
|
@Wiser: yes, for block 11321, I had correct response too, you can check the block 11329 from my previous post if it is same.
|
BTC 1C9FGy8kUTF1R21bhLyzXQHDjm87xoRenn, LTC LXZ7xhLYJU4K8zdtdYc89o81NgwXbSwEbC or DOGE DKJDnR8deKGRRbFWCnsSDz15ha5t43B75B. :-)
|
|
|
hashpower
Newbie
Offline
Activity: 59
Merit: 0
|
|
October 11, 2014, 08:51:04 PM |
|
i got
23:50:18  { "hash" : "3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0", "confirmations" : 14, "size" : 444, "height" : 11321, "version" : 1, "merkleroot" : "1a20da2d0b4442d2ee718372d7c1bc68e0ea19c97cbb8de7f39fbc690ef68ab2", "mint" : 0.14349248, "time" : 1413059943, "nonce" : 0, "bits" : "1e69c5b7", "difficulty" : 0.00003693, "blocktrust" : "26b98", "chaintrust" : "28e49fc4df51da", "previousblockhash" : "62364289c04cd185ae529caf9139c2f9c3d367c428ab8d537bbc5ce4b864a7b8", "nextblockhash" : "24a4bbdacdfc518ca5396f601daa2a532c712f5bd6c5b16125388f0c937dd9d7", "flags" : "proof-of-stake", "proofhash" : "0003fa27fbe95d5fa800633cdb14f6b4a704f17c7d51836065b7ae565b5f5822", "entropybit" : 0, "modifier" : "406f00d126e815e9", "modifierchecksum" : "c85938aa", "tx" : [ "19b8ccba2ab3ac4a1a5dad61e4cb179c8d86b4dfbff00ac2e38c80bf6f41c62a", "88d91dfde6471fcd7a45a2aa52e933ac6a5b04acaa1057f4e3f57c0db40a70f1" ], "signature" : "3045022100af068f1171b3b85355d5cd2c967e156efc46d5fe68cecbf8ae284da82ee7ff8502202 c93db2224b563a7ce84a627d20b67bb9227b0cb1128bd0bf8fe562c4cebfd27" }
|
|
|
|
cryptzo (OP)
|
|
October 11, 2014, 08:51:35 PM |
|
I got this: { "hash" : "3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0", "confirmations" : 9, "size" : 444, "height" : 11321, "version" : 1, "merkleroot" : "1a20da2d0b4442d2ee718372d7c1bc68e0ea19c97cbb8de7f39fbc690ef68ab2", "mint" : 0.14349248, "time" : 1413059943, "nonce" : 0, "bits" : "1e69c5b7", "difficulty" : 0.00003693, "blocktrust" : "26b98", "chaintrust" : "28e49fc4df51da", "previousblockhash" : "62364289c04cd185ae529caf9139c2f9c3d367c428ab8d537bbc5ce4b864a7b8", "nextblockhash" : "24a4bbdacdfc518ca5396f601daa2a532c712f5bd6c5b16125388f0c937dd9d7", "flags" : "proof-of-stake", "proofhash" : "0003fa27fbe95d5fa800633cdb14f6b4a704f17c7d51836065b7ae565b5f5822", "entropybit" : 0, "modifier" : "406f00d126e815e9", "modifierchecksum" : "c85938aa", "tx" : [ "19b8ccba2ab3ac4a1a5dad61e4cb179c8d86b4dfbff00ac2e38c80bf6f41c62a", "88d91dfde6471fcd7a45a2aa52e933ac6a5b04acaa1057f4e3f57c0db40a70f1" ], "signature" : "3045022100af068f1171b3b85355d5cd2c967e156efc46d5fe68cecbf8ae284da82ee7ff8502202 c93db2224b563a7ce84a627d20b67bb9227b0cb1128bd0bf8fe562c4cebfd27" } Is that good? I know it sucks and I know I said go to 1.0.4, but bittrex is going to 1.0.5 so everyone needs to go to 1.0.5 and resync immediately.
The block explorer is forked from 1.0.4 and is not on the right block. Nodes are resyncing. The proper hash for block 11321 is 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
Go to help > debug window and type getblock 3d67968e7539234c9c8402b6d4a48022e63277e57b424fa6d3b89eb28e6eacd0
If you get an error you need to get 1.0.5 and delete the stuff in %appdata%/seedcoin except for your wallet.dat file
This will not happen again. I'm not touching the staking algo again, or anything else that effects the network, and any core updates will be thoroughly tested over the course of several weeks before release, and there will be months of lead time to get the correct version.
Yes. That's right. People that are running the wrong chain will get an error message saying block not found.
|
|
|
|
meccoin4me
|
|
October 11, 2014, 08:53:35 PM |
|
ok i am staking now on wallet 1.0.5 and have to go to bed so i hope everything works well from now
|
|
|
|
igor107th
|
|
October 11, 2014, 08:53:56 PM |
|
new block explorer please dont get the brains lol
|
|
|
|
pkobse
|
|
October 11, 2014, 09:17:17 PM |
|
new block explorer please dont get the brains lol That one is working on correct chain: http://www.argakiig.us/blockchain/seed/index.phpHowever, the one here: https://chainz.cryptoid.info/seed/#looks to be on fork and still adding new blocks. So some people still staking with 1.0.4 client and on wrong fork.
|
BTC 1C9FGy8kUTF1R21bhLyzXQHDjm87xoRenn, LTC LXZ7xhLYJU4K8zdtdYc89o81NgwXbSwEbC or DOGE DKJDnR8deKGRRbFWCnsSDz15ha5t43B75B. :-)
|
|
|
givemebitcoin
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 11, 2014, 09:19:19 PM |
|
So it's running well now?
|
|
|
|
pkobse
|
|
October 11, 2014, 09:22:17 PM |
|
So it's running well now?
If you are running 1.0.5 wallet, you are on correct chain, then yes. I already staked 269% first time there.
|
BTC 1C9FGy8kUTF1R21bhLyzXQHDjm87xoRenn, LTC LXZ7xhLYJU4K8zdtdYc89o81NgwXbSwEbC or DOGE DKJDnR8deKGRRbFWCnsSDz15ha5t43B75B. :-)
|
|
|
unclepeter
Newbie
Offline
Activity: 30
Merit: 0
|
|
October 11, 2014, 09:27:38 PM |
|
So it's running well now?
If you are running 1.0.5 wallet, you are on correct chain, then yes. I already staked 269% first time there. was that for a block bigger than 1 seed
|
|
|
|
givemebitcoin
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 11, 2014, 09:36:16 PM |
|
So it's running well now?
If you are running 1.0.5 wallet, you are on correct chain, then yes. I already staked 269% first time there. Thanks
|
|
|
|
Rayban34
Member
Offline
Activity: 112
Merit: 10
|
|
October 11, 2014, 09:40:22 PM |
|
Ok, changed.
|
|
|
|
wiser
Legendary
Offline
Activity: 1806
Merit: 1029
|
|
October 11, 2014, 09:42:47 PM |
|
Just a friendly reminder... if anyone set their reserve balances to the whole number, be sure to change that back unless you are intending to stake that way until the fix takes effect.
I know I just now remembered to zero mine out.
|
|
|
|
|