Bitcoin Forum
December 02, 2016, 06:16:37 PM *
News: Latest stable version of Bitcoin Core: 0.13.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Poll
Question: would you be interested in an next generation ASIC trade up program for your ModMiner Quad?
YES
NO

Pages: « 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ... 105 »
  Print  
Author Topic: High Efficiency FPGA & ASIC Bitcoin Mining Devices https://BTCFPGA.com  (Read 200568 times)
cablepair
Hero Member
*****
Offline Offline

Activity: 854


https://btc-republic.com/index.php?ref=cablepair


View Profile WWW
June 19, 2012, 04:33:19 PM
 #181

Just for the hell of it, have you tried it on a different pool other than GPUMAX?


It probably wont make a difference but I am curious, considering GPUMAX is not a traditional pool.

I have a feeling we may need to issue a firmware update today, as soon as stcupp comes around we will get to the bottom of this, thanks for being patient but I assure you we will get to the bottom of this and get it resolved TODAY.



Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1480702597
Hero Member
*
Offline Offline

Posts: 1480702597

View Profile Personal Message (Offline)

Ignore
1480702597
Reply with quote  #2

1480702597
Report to moderator
1480702597
Hero Member
*
Offline Offline

Posts: 1480702597

View Profile Personal Message (Offline)

Ignore
1480702597
Reply with quote  #2

1480702597
Report to moderator
1480702597
Hero Member
*
Offline Offline

Posts: 1480702597

View Profile Personal Message (Offline)

Ignore
1480702597
Reply with quote  #2

1480702597
Report to moderator
imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 04:42:22 PM
 #182

Just for the hell of it, have you tried it on a different pool other than GPUMAX?


It probably wont make a difference but I am curious, considering GPUMAX is not a traditional pool.

I have a feeling we may need to issue a firmware update today, as soon as stcupp comes around we will get to the bottom of this, thanks for being patient but I assure you we will get to the bottom of this and get it resolved TODAY.





All of my testing was on eligius.

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
cablepair
Hero Member
*****
Offline Offline

Activity: 854


https://btc-republic.com/index.php?ref=cablepair


View Profile WWW
June 19, 2012, 04:45:59 PM
 #183


Luckily these are made to update the firmware very easily and I am guessing this is what we are going to have to do.

as soon as stcupp comes online we will get these all up and running, thank you for being patient.
stcupp
Full Member
***
Offline Offline

Activity: 196


View Profile
June 19, 2012, 08:15:21 PM
 #184

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans



imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 08:50:31 PM
 #185

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans

Leave it named MMQ.bin or rename it firmware.bin?


Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
matthewh3
Legendary
*
Offline Offline

Activity: 1372



View Profile WWW
June 19, 2012, 08:58:22 PM
 #186

hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

We should have the boards by this Friday to Monday hopefully.  I think they were posted today?

imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 09:02:49 PM
 #187

hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
matthewh3
Legendary
*
Offline Offline

Activity: 1372



View Profile WWW
June 19, 2012, 09:03:44 PM
 #188

hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread

imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 09:07:47 PM
 #189

hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread

So you know when the card that was shipped to me was ordered?

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
cablepair
Hero Member
*****
Offline Offline

Activity: 854


https://btc-republic.com/index.php?ref=cablepair


View Profile WWW
June 19, 2012, 09:09:24 PM
 #190

Let me just clear something up here please

Matthew is a friend and employee of mine and he actually purchased his units while we were still prototyping

and way before we ever even went public with them or anyone had ever even heard of the modminer quad or BTCFPGA.com

he was sent a prototype at one time but asked if he could send it back and upgrade to the new and improved unit which I agreed to do

This mess is my mess to clear up - I should of never agreed to sell a prototype but at the time we were in need of funding and I thought it was the right thing to do.

As I have already explained to Matthew he is not entitled to the 9% discount because we never guaranteed a shipping time with him and this 9% discount did not even exist at the time he purchased one from me. Hell this business did not even really exist when he purchased one from me.

Your units are on the way and will be tracking soon. If you have any more questions you can certainly email me at tom@btcfpga.com

edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

matthewh3
Legendary
*
Offline Offline

Activity: 1372



View Profile WWW
June 19, 2012, 09:10:42 PM
 #191

hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread

So you know when the card that was shipped to me was ordered?

Sorry crossed wires I think  Undecided

filharvey
Sr. Member
****
Offline Offline

Activity: 434


View Profile
June 19, 2012, 10:01:03 PM
 #192

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil
imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 10:02:02 PM
 #193

edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

That's what I kinda figured. Smiley

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
cablepair
Hero Member
*****
Offline Offline

Activity: 854


https://btc-republic.com/index.php?ref=cablepair


View Profile WWW
June 19, 2012, 10:04:05 PM
 #194

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

send email to stephen@btcfpga.com

he is available now to provide tech support
imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 10:17:02 PM
 #195

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

send email to stephen@btcfpga.com

he is available now to provide tech support

how about an irc channel.. like #btcfpga on freenode?

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 19, 2012, 10:20:41 PM
 #196

edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

That's what I kinda figured. Smiley

my point was before he launched we bought the boards first and we didnt announce it, so i am bit surprised everyone is getting their boards before us , since we (RSM) were the first customer of this new fpga company

we were first in line and i was hoping we would get the 9% refund too !

So why not contact him directly?

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
stcupp
Full Member
***
Offline Offline

Activity: 196


View Profile
June 19, 2012, 10:27:38 PM
 #197

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

Could you try running cgminer with 2>log.txt -D  and send the log.txt to stephen@btcfpga.com


cablepair
Hero Member
*****
Offline Offline

Activity: 854


https://btc-republic.com/index.php?ref=cablepair


View Profile WWW
June 20, 2012, 12:10:31 AM
 #198

Its starting to look like all these issues are software related which is a relief.

If you don't mind using MPBM instead of cgminer you should have no problems at all


for help with tech related issues you can join #BTCFPGA on Freenode IRC
thanks

imsaguy
General failure and former
VIP
Hero Member
*
Offline Offline

Activity: 574

Don't send me a pm unless you gpg encrypt it.


View Profile WWW
June 20, 2012, 12:28:30 AM
 #199

the new firmware + the special 2.4.2 cgminer that was linked to earlier has got me hashing on 3 out of 4 daughter cards.  The engineer is working on the software so I'm confident the 4th will be mining soon.

Coming Soon!™ © imsaguy 2011-2013, All rights reserved.

EIEIO:
https://bitcointalk.org/index.php?topic=60117.0

Shades Minoco Collection Thread: https://bitcointalk.org/index.php?topic=65989
Payment Address: http://btc.to/5r6
Qoheleth
Legendary
*
Offline Offline

Activity: 882


Spurn wild goose chases. Seek that which endures.


View Profile WWW
June 20, 2012, 02:06:52 AM
 #200

On Linux. Can't seem to get the kernel talking with the board. lsusb has no knowledge of the device, and /var/log/messages squawks thus when I plug it in:
Code:
Jun 19 19:22:37 localhost kernel: [1637938.280136] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
Jun 19 19:22:37 localhost kernel: [1637938.280184] ehci_hcd 0000:00:13.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Jun 19 19:22:37 localhost kernel: [1637938.280220] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Jun 19 19:22:37 localhost kernel: [1637938.385092] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
Jun 19 19:22:37 localhost kernel: [1637938.435063] ehci_hcd 0000:00:13.2: port 1 full speed --> companion
Jun 19 19:22:37 localhost kernel: [1637938.435077] ehci_hcd 0000:00:13.2: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
Jun 19 19:22:37 localhost kernel: [1637938.435134] ohci_hcd 0000:00:13.0: auto-wakeup root hub
Jun 19 19:22:37 localhost kernel: [1637938.435206] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
Jun 19 19:22:37 localhost kernel: [1637938.487059] ehci_hcd 0000:00:13.2: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
Jun 19 19:22:37 localhost kernel: [1637938.487126] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0002
Jun 19 19:22:37 localhost kernel: [1637938.487144] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
Jun 19 19:22:37 localhost kernel: [1637938.487156] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jun 19 19:22:37 localhost kernel: [1637938.590374] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
Jun 19 19:22:37 localhost kernel: [1637938.652105] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:37 localhost kernel: [1637938.704077] usb 5-1: new full speed USB device using ohci_hcd and address 34
Jun 19 19:22:37 localhost kernel: [1637938.705141] ohci_hcd 0000:00:13.0: urb ffff8800af1c3540 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:37 localhost kernel: [1637938.707108] ohci_hcd 0000:00:13.0: urb ffff8800af1c3540 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:37 localhost kernel: [1637938.709100] ohci_hcd 0000:00:13.0: urb ffff8800af1c3540 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637938.772085] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:38 localhost kernel: [1637938.822771] usb 5-1: device descriptor read/64, error -62
Jun 19 19:22:38 localhost kernel: [1637938.924127] ohci_hcd 0000:00:13.0: urb ffff8800af1c39c0 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637938.926108] ohci_hcd 0000:00:13.0: urb ffff8800af1c39c0 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637938.928109] ohci_hcd 0000:00:13.0: urb ffff8800af1c39c0 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637938.990126] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:38 localhost kernel: [1637939.041101] usb 5-1: device descriptor read/64, error -62
Jun 19 19:22:38 localhost kernel: [1637939.206102] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:38 localhost kernel: [1637939.256144] usb 5-1: new full speed USB device using ohci_hcd and address 35
Jun 19 19:22:38 localhost kernel: [1637939.257131] ohci_hcd 0000:00:13.0: urb ffff8800af1c3cc0 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.259124] ohci_hcd 0000:00:13.0: urb ffff8800a5839f00 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.261106] ohci_hcd 0000:00:13.0: urb ffff8800a5839f00 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.323183] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:38 localhost kernel: [1637939.374281] usb 5-1: device descriptor read/64, error -62
Jun 19 19:22:38 localhost kernel: [1637939.476103] ohci_hcd 0000:00:13.0: urb ffff880138e5ec00 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.478439] ohci_hcd 0000:00:13.0: urb ffff880138e5ec00 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.480151] ohci_hcd 0000:00:13.0: urb ffff88011aa7d3c0 path 1 ep0in 5ec20000 cc 5 --> status -62
Jun 19 19:22:38 localhost kernel: [1637939.543102] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:38 localhost kernel: [1637939.593124] usb 5-1: device descriptor read/64, error -62
Jun 19 19:22:39 localhost kernel: [1637939.756121] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:39 localhost kernel: [1637939.807129] usb 5-1: new full speed USB device using ohci_hcd and address 36
Jun 19 19:22:39 localhost kernel: [1637939.808128] ohci_hcd 0000:00:13.0: urb ffff8800af1c3c00 path 1 ep0out 5ec20000 cc 5 --> status -62
Jun 19 19:22:39 localhost kernel: [1637940.010143] ohci_hcd 0000:00:13.0: urb ffff88011aa7d9c0 path 1 ep0out 5ec20000 cc 5 --> status -62
Jun 19 19:22:39 localhost kernel: [1637940.211189] usb 5-1: device not accepting address 36, error -62
Jun 19 19:22:39 localhost kernel: [1637940.273253] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jun 19 19:22:39 localhost kernel: [1637940.324266] usb 5-1: new full speed USB device using ohci_hcd and address 37
Jun 19 19:22:39 localhost kernel: [1637940.325141] ohci_hcd 0000:00:13.0: urb ffff88011aa7d900 path 1 ep0out 5ec20000 cc 5 --> status -62
Jun 19 19:22:39 localhost kernel: [1637940.527296] ohci_hcd 0000:00:13.0: urb ffff88011aa7dc00 path 1 ep0out 5ec20000 cc 5 --> status -62
Jun 19 19:22:40 localhost kernel: [1637940.728106] usb 5-1: device not accepting address 37, error -62
Jun 19 19:22:40 localhost kernel: [1637940.728199] hub 5-0:1.0: unable to enumerate USB device on port 1
Jun 19 19:22:40 localhost kernel: [1637940.728239] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
Jun 19 19:22:40 localhost kernel: [1637940.728286] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0002

This is with the firmware from this post; firmware loading mode seems to function as a sane mass storage device, as expected.

Ideas?

If there is something that will make Bitcoin succeed, it is growth of utility - greater quantity and variety of goods and services offered for BTC. If there is something that will make Bitcoin fail, it is the culture of naive fools and conmen, the former convinced that BTC is a magic box that will turn them into millionaires, and the latter arriving by the busload to devour them.
Pages: « 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ... 105 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!