zOU
|
|
December 22, 2015, 04:23:15 PM |
|
Nice !
|
|
|
|
philspain
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 22, 2015, 04:31:17 PM |
|
Nice !
only getting really low hash rate though what are the best setting I have not put any just trying to find them. Just thought I would see if it worked 1st
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
December 22, 2015, 04:38:03 PM |
|
Ahah !!! Well it looks like a power supply issue. Try powering it from a standard power supply those are the types of plugs i use to power up my u3's. plugged into an evga 550w psu. Thank you to everyone who helped me I bought a power supply today and wired it has you suggested and it worked straight away I know there is a rumor it helps stop zombies vs regular brick. Can you say if you got more time in-between bricks? I'm just curious if amount of zombies benefit's from this.
|
|
|
|
zOU
|
|
December 22, 2015, 05:54:00 PM |
|
Nice !
only getting really low hash rate though what are the best setting I have not put any just trying to find them. Just thought I would see if it worked 1st --au3-freq 250 --au3-volt 830
|
|
|
|
philspain
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 22, 2015, 06:01:27 PM |
|
Nice !
only getting really low hash rate though what are the best setting I have not put any just trying to find them. Just thought I would see if it worked 1st --au3-freq 250 --au3-volt 830 Thks will try
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
December 23, 2015, 07:36:06 AM |
|
Every U3 is different, play with the volt and freq combos until you find one that works best for your U3. Be sure you're using a good power supply when you start upping the voltage.
|
|
|
|
philspain
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 23, 2015, 02:26:25 PM |
|
Every U3 is different, play with the volt and freq combos until you find one that works best for your U3. Be sure you're using a good power supply when you start upping the voltage.
I'm only getting this hashrate cgminer version 4.9.2 - Started: [2015-12-23 15:03:51] -------------------------------------------------------------------------------- (5s):18.52G (1m):15.10G (5m):7.618G (15m):3.170G (avg):13.12Gh/s A:510 R:45 HW:81 WU:164.4/m Connected to uk1.ghash.io diff 15 with stratum as user Block: 81a31b5d... Diff:93.4G Started: [15:03:51] Best share: 15.5K -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: AU3 0 : 225MHz 775mV | 19.31G / 13.18Gh/s WU:164.4/m -
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
December 23, 2015, 05:49:42 PM |
|
You are still at default voltage and frequency. Try bumping up the freq and volt as mentioned above (250 / 800 is good for most people). Also, use the [ code ] tag for your cgminer cut/paste or the forum does things with the [] commands. It is also helpful to do widescreen display so we can see accepted shares and HW errors. cgminer version 4.9.2 - Started: [2015-12-23 15:03:51] -------------------------------------------------------------------------------- (5s):18.52G (1m):15.10G (5m):7.618G (15m):3.170G (avg):13.12Gh/s A:510 R:45 HW:81 WU:164.4/m Connected to uk1.ghash.io diff 15 with stratum as user Block: 81a31b5d... Diff:93.4G Started: [15:03:51] Best share: 15.5K -------------------------------------------------------------------------------- SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: AU3 0 : 225MHz 775mV | 19.31G / 13.18Gh/s WU:164.4/m
|
|
|
|
philspain
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 23, 2015, 06:24:27 PM |
|
You are still at default voltage and frequency. Try bumping up the freq and volt as mentioned above (250 / 800 is good for most people). Also, use the [ code ] tag for your cgminer cut/paste or the forum does things with the [] commands. It is also helpful to do widescreen display so we can see accepted shares and HW errors. cgminer version 4.9.2 - Started: [2015-12-23 15:03:51] -------------------------------------------------------------------------------- (5s):18.52G (1m):15.10G (5m):7.618G (15m):3.170G (avg):13.12Gh/s A:510 R:45 HW:81 WU:164.4/m Connected to uk1.ghash.io diff 15 with stratum as user Block: 81a31b5d... Diff:93.4G Started: [15:03:51] Best share: 15.5K -------------------------------------------------------------------------------- SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: AU3 0 : 225MHz 775mV | 19.31G / 13.18Gh/s WU:164.4/m Thanks I will try and find the [] commands. I have changed the freq and volt not much change though
|
|
|
|
philspain
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 24, 2015, 03:23:45 PM |
|
I just tried it another USB port and the hash rate went to 62.44gh Thanks for all your help and Merry Christmas
|
|
|
|
zOU
|
|
December 27, 2015, 09:51:28 AM |
|
it looks like one of my U3 is dead:
- no hashing at all - the red LED that used to blink when hashing is now permanently ON - U3 is detected in windows/Linux - windows cgminer sees it but says there's no drivers even though zadig has been installed - linux: cgminer -n sees it, cgminer --benchmark just hangs....
I swapped power and USB cable with the same result
So far bitmain support has been unhelpful... They asked me to reinstall zadig drivers, but this doesn't fix my issue: cgminer -n [2015-12-23 14:27:51] USB all: found 13 devices - listing known devices .USB dev 0: Bus 8 Device 1 ID: 10c4:ea60 ** dev 0: Failed to open, err -12 [2015-12-23 14:27:51] 1 known USB devices cgminer version 4.9.2 - Started: [2015-12-23 14:29:10] -------------------------------------------------------------------------------- (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s A:0 R:0 HW:0 WU:0.0/m Connected to Benchmark diff ? without LP as user Benchmark Block: ... Diff: Started: Best share: 0 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit -------------------------------------------------------------------------------- [2015-12-23 14:29:10] And associate - AMU device 8:1 with WinUSB using zadig [2015-12-23 14:29:10] See README.txt file included for help [2015-12-23 14:29:10] Icarus detect (8:1) failed to initialise (incorrect device?) [2015-12-23 14:29:10] USB init, open device failed, err -12, [2015-12-23 14:29:10] You need to install a WinUSB driver for - AMU device 8:1 [2015-12-23 14:29:10] And associate - AMU device 8:1 with WinUSB using zadig [2015-12-23 14:29:10] See README.txt file included for help [2015-12-23 14:29:10] Icarus detect (8:1) failed to initialise (incorrect device?) [2015-12-23 14:29:10] No devices detected! [2015-12-23 14:29:10] Waiting for USB hotplug devices or press q to quit [2015-12-23 14:29:17] USB init, open device failed, err -12, [2015-12-23 14:29:17] You need to install a WinUSB driver for - AMU device 8:1 [2015-12-23 14:29:17] And associate - AMU device 8:1 with WinUSB using zadig [2015-12-23 14:29:17] See README.txt file included for help [2015-12-23 14:29:17] Icarus detect (8:1) failed to initialise (incorrect device?) [2015-12-23 14:29:17] USB init, open device failed, err -12, [2015-12-23 14:29:17] You need to install a WinUSB driver for - AMU device 8:1 [2015-12-23 14:29:17] And associate - AMU device 8:1 with WinUSB using zadig [2015-12-23 14:29:17] See README.txt file included for help [2015-12-23 14:29:17] Icarus detect (8:1) failed to initialise (incorrect device?) Again: the USB red LED is on the red LED that is supposed to be ON is OFF the red LED that is supposed to blink when hashing is ON
|
|
|
|
megatron1337
Member
Offline
Activity: 84
Merit: 10
★777Coin.com★ Fun BTC Casino!
|
|
December 27, 2015, 10:44:46 PM |
|
I would go with a frequency of 237.50 and voltage of 800 for something stable.
|
|
|
|
Kx-38ngv
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 28, 2015, 09:48:44 PM Last edit: December 28, 2015, 10:34:05 PM by Kx-38ngv |
|
Hey guys ! So i got that U3 who just stop sometimes ( in cgminer 4.9.2 , only mhz is show , not the volt ... ) also detect as a blockrupter (?) , sometimes not detect at all , and when is detect got only 29gh/s , is that normal or this lil thing is dead ? --au3-freq 237.5 --au3-volt 800 for the conf , i tried lower volt and freq , but still got this problem .. (sorry for bad english ) EDIT : cgminer version 4.9.2 - Started: [2015-12-28 23:01:43] -------------------------------------------------------------------------------- (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s A:0 R:0 HW:0 WU:0.0/m Connected to uk1.ghash.io diff 76 with stratum as user Korax38.worker1 Block: b45f4a78... Diff:93.4G Started: [23:01:43] Best share: 0 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit -------------------------------------------------------------------------------- [2015-12-28 23:01:38] Started cgminer 4.9.1 [2015-12-28 23:01:41] No devices detected! [2015-12-28 23:01:41] Waiting for USB hotplug devices or press q to quit [2015-12-28 23:01:41] Probing for an alive pool [2015-12-28 23:01:42] Pool 0 difficulty changed to 76 [2015-12-28 23:01:43] Network diff set to 93.4G [2015-12-28 23:02:49] AU3 0 GetResults usb read err:(-9) LIBUSB_ERROR_PIPE [2015-12-28 23:02:49] AU3 0 attempted reset got err:(0) LIBUSB_SUCCESS [2015-12-28 23:02:49] AU3 0 GetResults usb read err:(-1) LIBUSB_ERROR_IO [2015-12-28 23:02:49] AU3 0: Comms error (rerr=-1 amt=0) [2015-12-28 23:02:49] FAIL: USB get_lock not found (1:3) [2015-12-28 23:02:49] FAIL: USB remove not already in use (1:3) That's what i got when i UNPLUG the U3 cgminer version 4.9.2 - Started: [2015-12-28 23:01:43] -------------------------------------------------------------------------------- (5s):1.204G (1m):397.0M (5m):95.37M (15m):32.85M (avg):72.71Mh/s A:0 R:0 HW:0 WU:1.3/m Connected to uk1.ghash.io diff 76 with stratum as user Korax38.worker1 Block: 20ec445b... Diff:93.4G Started: [23:03:11] Best share: 26 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: ANU 0 : 250MHz | 2.725G / 2.014Gh/s WU:28.1/m -------------------------------------------------------------------------------- that's what i got when is (50%) detected cgminer version 4.9.2 - Started: [2015-12-28 23:12:52] -------------------------------------------------------------------------------- (5s):40.84M (1m):395.7M (5m):199.6M (15m):78.79M (avg):569.8Mh/s A:4 R:0 HW:0 WU:8.0/m Connected to uk1.ghash.io diff 4 with stratum as user Korax38.worker1 Block: 20ec445b... Diff:93.4G Started: [23:12:57] Best share: 23 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 1: AU3 0 : 225MHz 750mV | 0.000 / 154.5Mh/s WU: 2.2/m -------------------------------------------------------------------------------- [2015-12-28 23:14:43] Accepted 2046dd1b Diff 8/4 AU3 0 [2015-12-28 23:14:45] AU3 0: No valid hashes for over 1 secs, attempting to res et [2015-12-28 23:14:45] AU3 0 attempted reset got err:(0) LIBUSB_SUCCESS What i get when it finally appear in cgminer @ stock freq and volt a weird thing when i use the bitmain cgminer 4.8 [2015-12-28 23:33:21] Bmsc send golden nonce1 [2015-12-28 23:33:21] Bmsc recv golden nonce1 0345182b9f -- 0345182b [2015-12-28 23:33:21] Bmsc send golden nonce2 [2015-12-28 23:33:21] Bmsc recv golden nonce 9ec2c2989f != 466b30a5 and retry [2015-12-28 23:33:21] Bmsc recv golden nonce2 9ec2c2989f -- 466b30a5 [2015-12-28 23:33:21] Bmsc send golden nonce3 [2015-12-28 23:33:21] Bmsc recv golden nonce 857e65ee9f -- 857e65ee [2015-12-28 23:33:21] Bmsc send golden nonce4 [2015-12-28 23:33:22] Bmsc recv golden nonce4 timeout [2015-12-28 23:33:22] AMU0 Init: mode=default read_time=57ms limit=0ms Hs=2.976
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
December 28, 2015, 10:38:26 PM |
|
Try using v4.9.2, it is the most current release. 4.9.1 had problems detecting the U3.
Otherwise your problems are typical and among the reasons why the U3 totally sucks.
|
|
|
|
Kx-38ngv
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 28, 2015, 10:51:37 PM |
|
cgminer version 4.9.2 - Started: [2015-12-28 23:46:56] -------------------------------------------------------------------------------- (5s):36.30G (1m):30.10G (5m):13.39G (15m):5.303G (avg):30.80Gh/s A:916 R:0 HW:1 WU:430.0/m Connected to uk1.ghash.io diff 46 with stratum as user Korax38.worker1 Block: 3a50648a... Diff:93.4G Started: [23:49:28] Best share: 556 -------------------------------------------------------------------------------- [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: AU3 0 : 245MHz 845mV | 32.27G / 30.73Gh/s WU:430.0/m -------------------------------------------------------------------------------- Detect after 45 minutes of plug-off/plug-in , but , the 30Gh/s is normal ? last week i get the normal rate , like 60Gh/s ...
|
|
|
|
zOU
|
|
December 29, 2015, 07:38:47 AM |
|
I would go with a frequency of 237.50 and voltage of 800 for something stable.
well bitmain support asked me to test it with their outdated cgminer 4.8 with --bmsc-voltage 0830 --bmsc-freq 0982 but that doesn't change anything.... LED status is wrong and cgminer -n reports an error....
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
December 29, 2015, 06:56:43 PM |
|
My last U3 just died. I can see it with zadig and reinstall the driver, but it does not get recognized by cgminer, nor is the R1 able to fire it up as a controller. The red USB led lights up, but that's it. It will no longer hash no matter what I do. RIP U3.
Yours may just be dead/defect also, zOU.
|
|
|
|
zOU
|
|
December 29, 2015, 08:21:07 PM |
|
After less than 6month....
That would be sad...
|
|
|
|
megatron1337
Member
Offline
Activity: 84
Merit: 10
★777Coin.com★ Fun BTC Casino!
|
|
December 30, 2015, 02:04:31 AM |
|
My last U3 just died. I can see it with zadig and reinstall the driver, but it does not get recognized by cgminer, nor is the R1 able to fire it up as a controller. The red USB led lights up, but that's it. It will no longer hash no matter what I do. RIP U3.
Yours may just be dead/defect also, zOU.
And as usual it's never the users fault and bitmain sent you a crappy u3 right? I don't want to say it's your fault but chances are you overclocked it behond safe parameters even though you might not admit it.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
December 30, 2015, 02:11:02 AM |
|
My last U3 just died. I can see it with zadig and reinstall the driver, but it does not get recognized by cgminer, nor is the R1 able to fire it up as a controller. The red USB led lights up, but that's it. It will no longer hash no matter what I do. RIP U3.
Yours may just be dead/defect also, zOU.
And as usual it's never the users fault and bitmain sent you a crappy u3 right? I don't want to say it's your fault but chances are you overclocked it behond safe parameters even though you might not admit it. I have 3 out of 3 working fine with my R1. I am not trying to push them though. I get around 50GH or so out of each and around 150GH or a tad less out of all together. So far has seemed to work pretty good. I don't really OC anymore on any of my miners. During S3 day's I didn't have a second thought about doing it. But i just don't risk it anymore besides my compacs I do push them sometimes.
|
|
|
|
|